Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Experimental investigation of heat and mass transfer of novel closed circuit cooling tower

Experimental and computational analysis of thermal performance of the oval tube closed wet cooling tower

Experimental and numerical analysis of a cross-flow closed wet cooling tower

Thermodynamic Investigation on the Performance of Closed Wet Cooling Tower

Investigation of heat transfer characteristics of deflected elliptical-tube heat exchanger in closed-circuit cooling towers

An Experimental Study on the Heat and Mass Transfer Characteristics of an Evaporative Cooler

Experimental Investigation into the Heat and Mass Transfer in an Indirect Contact Closed Circuit Cooling Tower

Study on thermal performance of new finned heat exchange tube bundles in cooling tower

Study on heat transfer and water saving characteristics of a new cooling tower condensation module

Heat and mass transfer of evaporative cooler with elliptic tube heat exchangers- an experimental study

Three-Dimensional Numerical Study on Thermal Performance in A Natural Draft Wet Cooling Tower

Experimental Study of a Novel Non-Packing Closed Evaporative Cooling Tower with Vertical 3D Deformation Tubes

THEORETICAL AND EXPERIMENTAL STUDY ON THERMAL PERFORMANCE OF CLOSED WET COOLING TOWER

Experimental Study of the Falling Film Evaporative Cooling on Horizontal Tubes Plates

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Research on Heat and Mass Transfer Performance of Corrugated Coils in Closed Cooling Towers

Numerical Study of the Thermal Performance in Natural Draft Wet Cooling Tower with Different Fill Types

Thermal and experimental analysis of cross-flow closed cooling tower

Numerical Study of Natural Draft Wet Cooling Tower

Numerical investigation on novel water distribution for natural draft wet cooling tower

Experimental Study on a Spray and Falling-Film Cooling System