Abstract:The study of Pd‐based catalysts is important for the commercialization of direct methanol fuel cells. In this study, melt quenching is employed to synthesize Al–Pd–Ag precursor alloy ribbons, and self‐supported nanoporous Pd–Ag catalysts with high activity are successfully prepared by a precisely controlled dealloying process. The catalytic performance is 7.7 and 12.0 times higher than that of commercial Pt/C and Pd/C, respectively. Direct‐methanol fuel cells (DMFCs) have become a hot research topic in the energy field due to their excellent energy conversion efficiency and environmental sustainability. Optimization of catalyst preparation strategy is the key to enhance the performance of DMFC. In this study, melt quenching is employed to synthesize Al–Pd–Ag precursor alloy ribbons, and self‐supported nanoporous Pd–Ag catalysts with high activity are successfully prepared by a precisely controlled dealloying process. The catalysts are characterized microstructurally and tested electrochemically, and their performance is compared with samples without sodium terephthalate addition and with commercial Pt/C and Pd/C catalysts. In the results, it is shown that the maximum peak current density of methanol electrocatalytic oxidation is significantly enhanced to 1451.16 mA mg−1 with the addition of 15 mM sodium terephthalate, which is about 6.6 times higher than that of the unadded samples, and the catalytic performance is improved by a factor of 7.7 and 12.0, respectively, compared to those of commercial Pt/C and Pd/C. This remarkable performance enhancement is attributed to the innovative dealloying method, which not only refines the catalyst structure but also achieves a significant increase in catalytic performance through the assistance of active self‐supporting nanoporous structures and interfacial synergistic effects between palladium and silver.

Improvement of Pt-Catalyst Dispersion and Utilization for Direct Methanol Fuel Cells Using Silane Coupling Agent

Catalyst Improvement of Utilization for Direct Methanol Fuel Cell Using Silane Coupling Agents

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Enhanced cell performance: Incorporation of hydrophobic mesoporous silica into the triple-phase boundary of catalyst layer

Improvement of Direct Methanol Fuel Cell Performance by Modifying Catalyst Coated Membrane Structure

Improved Pt dispersion and catalytic performance by modified carbon support with low surface oxygen content and more mesopores

SiO2-Fe/N/C Catalyst with Enhanced Mass Transport in PEM Fuel Cells

Effect of Sodium Terephthalate on the Electrocatalytic Performance of Active Self‐Supporting Nanoporous PdAg Catalysts

Enhanced MEA Performance for PEMFCs under Low Relative Humidity and Low Oxygen Content Conditions Via Catalyst Functionalization

Synergy of Pt-Free Single Metal Sites for Promoting Pt and Pt<sub>3</sub>co Ordered Intermetallic Catalysts for Fuel Cells: Performance and Durability Improvements

Water management improvement in PEM fuel cells via addition of PDMS or APTES polymers to the catalyst layer

Platinum nanoparticles anchored on aminated silica@PEDOT-PSS hybrid for enhanced methanol oxidation electrocatalysis

SiO2 stabilized Pt/C cathode catalyst for proton exchange membrane fuel cells

Enhanced Pt Utilization in Electrocatalysts by Covering of Colloidal Silica Nanoparticles

Microstructures and Proton Networks of Ionomer Film on the Surface of Platinum Single Atom Catalyst in Polymer Electrolyte Membrane Fuel Cells

Optimizing design of catalyst layer structure with carbon-supported platinum weight ratio mixing method for proton exchange membrane fuel cells

Enhanced life of proton exchange membrane fuel cell catalysts using perfluorosulfonic acid stabilized carbon support

Oxygen Reduction Catalyzed by Pt Nanoparticles Confined in Mesoporous Carbon Supports Doped with Single Fe Atoms

Dispersing Pt Atoms Onto Nanoporous Gold for High Performance Direct Formic Acid Fuel Cells

Preparation of Pt-Catalyst by Poly(p-phenylenediamine) Nanocomposites Assisted by Microwave Radiation for Proton Exchange Membrane Fuel Cell

High Utilization Platinum Deposition on Single-Walled Carbon Nanotubes As Catalysts for Direct Methanol Fuel Cell