Abstract:Among fuel cells, the direct methanol fuel cell (DMFC) has attracted great attention and has been considered a very promising power source because of the ease of methanol transportation and its high energy density. A major limiting factor hindering DMFC’s commercial application is the poor catalytic performance in the anode (methanol oxidation reaction). The methanol oxidation reaction (MOR) requires (OH-) from water dissociation as an oxygen donor for the reaction; however, the slow water dissociation on Pt limits the rate of MOR. In addition to the sluggish catalytic activity, the other major impediment for Pt catalysts is the generation of carbon monoxide (CO) during the MOR process.In order to improve the catalytic performance of MOR catalysts, a variety of catalyst design strategies have been devised. The interesting way of carrying out the MOR catalytic process is the non-CO pathway which takes place on Pt-Au bimetallic catalysts, thus eliminating CO poisoning. However, the overall activity of Pt-Au alloys in MOR is relatively low, which ultimately limits the application of Pt-Au catalysts. In this study, a nanoporous (np) Au-Cu-Pt thin-film catalyst with a fine structure and tunable composition is synthesized by using a facile method involving successive electrodeposition and de-alloying. SEM, SEM-EDX and ICP have been used for morphology characterization and composition assessment. Pb under-potential deposition (UPD), H UPD and CO stripping tests have been employed to determine the electrochemical active surface area (ECSA) and to probe the Pt active sites specifically. Also, cyclic voltammetry (CV) tests have been performed to assess the catalytic performance in MOR. Finally, long-term CV and chronoamperometry (constant potential) tests have been used to study and evaluate the durability of accordingly synthesized catalyst for MOR. The prepared np Au-Cu-(8% in the precursor alloy)Pt catalyst exhibits outstanding mass and specific activity toward the MOR, which is approximately six- and nine-times higher than the activity of a commercial Pt/C(40%) counterpart, respectively. A negative 75 mV onset potential shift upon the MOR anodic scan on the np Au-Cu-(8 %)Pt catalyst in comparison with Pt/C(40%) corroborates its higher catalytic activity. Furthermore, the alloy catalyst demonstrates better durability than the Pt/C(40%) counterpart in a three-hour constant potential test and exhibits full post-factum recovery of its cycling activity. In addition, it retains more than 60% of its original activity after 3000 cycles of an accelerated degradation test. Reference: Xie, Y., Li, C., Razek, S.A., Fang, J. and Dimitrov, N., 2020. Synthesis of Nanoporous Au− Cu− Pt Alloy as a Superior Catalyst for the Methanol Oxidation Reaction. ChemElectroChem, 7(2), pp.569-580.

Platinum nanoparticles anchored on aminated silica@PEDOT-PSS hybrid for enhanced methanol oxidation electrocatalysis

Highly Active Nanoporous Pt-based Alloy As Anode and Cathode Catalyst for Direct Methanol Fuel Cells

Hollow PtPd Nanorods with Mesoporous Shells As an Efficient Electrocatalyst for the Methanol-Oxidation Reaction.

Hierarchical Platinum-Nickel@Platinum-Tin Core@Shell Nanowires Achieve Efficient Fuel Cell Catalysis

Platinum supported on hydroxyl-grafted poly (3,4-ethylenedioxythiophene)-modified RuCo, N-tridoped bamboo-like carbon nanotubes for direct methanol fuel cell

Highly Efficient Anode Catalyst with a Ni@PdPt Core–shell Nanostructure for Methanol Electrooxidation in Alkaline Media

PEDOT-embellished Ti 3 C 2 Tx nanosheet supported Pt–Pd bimetallic nanoparticles as efficient and stable methanol oxidation electrocatalysts

Palladium nanocrystals immobilized on boron and nitrogen codoped mesoporous carbon spheres as efficient methanol oxidation electrocatalysts

Facile Synthesis of Highly Active Three-Dimensional Urchin -Like Pd@PtNi Nanostructures for Improved Methanol and Ethanol Electrochemical Oxidation

Insights into the synergy of platinum and nickel carbonate hydroxide for efficient methanol electro-oxidation

Black Phosphorus Nanodots-Modified Pt/C Electrocatalyst for Methanol-Tolerant Oxygen Reduction in Direct Methanol Fuel Cells

Internal and External Cooperation of Pt/SiC-Ni Catalyst Affording Unexpected Performance of Direct Methanol Fuel Cell

Facile Synthesis of PtP2 Nanocrystals As Highly Active Electrocatalysts for Methanol Oxidation.

Platinum-Decorated Amorphous Sulfurized Palladium Nanowires for Effective Ethanol Oxidation Reaction

Nanoporous Au-Cu-Pt As a Superior Electro-Catalyst for the Methanol Oxidation Reaction

Alloyed Pt–Ru Nanoparticles Immobilized on Mesostructured Nitrogen-Doped Carbon Nanocages for Efficient Methanol Electrooxidation

Preparation and Characterization of Novel Nickel–palladium Electrodes Supported by Silicon Microchannel Plates for Direct Methanol Fuel Cells

Excellent dispersion and electrocatalytic properties of Pt nanoparticles supported on novel porous anatase TiO2 nanorods

PtRu mesoporous nanospheres as electrocatalysts with enhanced performance for oxidation of methanol

Nitrogen- and Oxygen-Codoped Porous Carbonaceous Foam Templated from High Internal Emulsion As PtRu Catalyst Support for Direct Methanol Fuel Cell

Platinum Assisted by Carbon Quantum Dots for Methanol Electro-Oxidation