Abstract:Efficiency improvement and energy consumption decrease are becoming a pivotal issue in vehicle applications. Predictive control based on a radius‐basis‐function neural network (RBFNN) is employed to develop a new energy‐reserving strategy (ERS) that dynamically regulates the energy stored in the supercapacitor pack (SCP), which is equipped in an energy‐saving elevator system. Specifically, at the beginning of every traveling period, the balance voltage (BV) of the SCP, which represents the instantaneous state of the energy stored, is predicted and managed based on the traveling distance and the load ratio of the elevator. In this way, the capacitance of the SCP can be fully used to provide or reserve as much energy as possible. The above energy optimization problem is modeled and transformed into a group of constrained optimization equations based on the energy analysis of the elevator. With the proposed control scheme, not only does the peak power, which comes out when the elevator moves with heavy load eliminate, but also part of the nominal power can be provided by the SCP. Thus, the power provided by the AC‐grid pulse‐width modulation (PWM) rectifier is decreased, and the energy discharged by the SCP, which has reserved the braking energy at the previous journey, is optimized. The paper includes a detailed explanation of power and energy flow of the elevator and the implementation of the proposed RBFNN‐based predictive control scheme. Finally, several simulation and experimental results are presented to demonstrate the effectiveness of the presented control scheme. © 2018 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.

Research on the Energy Saving Elevator Using Battery Backup System

Study on the Model of Elevator Regeneration Energy and Its Energy Storage Control Method

Research of Boom Energy Recovery System in Hybrid Excavator

Research on the System of Arm Potential Energy Recovery in Hybrid Hydraulic Excavators

New Investigation in Energy Regeneration of Hydraulic Elevators

A new method for dynamic energy management of energy-saving elevators based on super capacitors

Energy-saving system applying pressure accumulators for VVVF controlled hydraulic elevators

Study on the technology of brake and energy regeneration for electric vehicles

Energy-saving Methods of Hydraulic Elevator

Research and Design of the Energy Saving Control System of Elevator Based on Super-Capacitor

Study on Installed Power of Hydraulic Elevators

A Radial-Basis-Function Neural Network-Based Energy Reserving Strategy For Energy-Saving Elevator

A radial-basis-function neural network-based energy reserving strategy for energy-saving elevator: RADIUS-BASIS-FUNCTION NEURAL NETWORK-BASED ENERGY RESERVING STRATEGY

Power Optimal Control of Elevator Brake Energy Recovery System Based on Super-Capacitor Energy Storage and Adaptive Power-Prediction Model

Possibilities for Energy Saving Predictions in Elevators

Safety brake performance evaluation and optimization of hydraulic lifting systems in case of overspeed dropping

High-speed elevator car system semi-active horizontal vibration reduction method based on the improved particle swarm algorithm

Energy Efficiency Improvement of Battery Powered Wheel Loader with an Electric-Hydrostatic Hybrid Powertrain

Comparison of Energy-Saving on the Speed Control of the Vvvf Hydraulic Elevator with and Without the Pressure Accumulator

Research On Parallel Hybrid Hydraulic Excavator With Energy Regeneration System

An Energy-saving Elevator Group Control Algorithm