Abstract:Though the traditional energy regeneration system(ERS) which used a hydraulic motor and a generator in hybrid excavators can regenerate part of the energy, the power of the motor and the generator should be larger and the time for regenerating energy is so short. At first, the structure of new ERS that combines the advantages of an electric and hydraulic accumulator is analyzed. The energy can be converted into both the electric energy and the hydraulic energy at the lowering of the boom and the generator can still works when the boom stops going down. Then, a method how to set the working pressure of the hydraulic accumulator is proposed. To avoid the excess loss, extra noise and shock pressure, a two-level pressure threshold method that the generator starts to work at the rising edge of the high pressure threshold and stops working at the falling edge of the low pressure threshold is presented to characterize the working mode of the generator. The control strategies on how to control the boom velocity at the lowering of the boom and how to improve the recovery efficiency when the boom stops going down are presented. The test bench of hybrid excavator with ERS is constructed, with which the studies on the influences of ERS on energy conversion efficiency and control performance are carried out. Experimental results show that the proposed ERS features better speed control performance of the boom than traditional ERS. It is also observed that an estimated 45% of the total potential energy could be regenerated at the lowering of the boom in the proposed ERS, and the power level of the generator and the hydraulic motor could be reduced by 60%. Hence, the proposed ERS has obvious advantages over the traditional ERS on the improvement of energy regeneration time, energy efficiency, control performance and economy.

Research On Parallel Hybrid Hydraulic Excavator With Energy Regeneration System

Research on the System of Arm Potential Energy Recovery in Hybrid Hydraulic Excavators

Simulation Research of Parallel Hydraulic Hybrid Excavator

Research of Boom Energy Recovery System in Hybrid Excavator

Energy saving scheme of hydraulic excavators based on hybrid power technology

Research on Modeling and Control Strategy of Parallel Hybrid Power System in Excavator

Research on the Design and Control Strategy for a Flow-Coupling-based Hydraulic Hybrid Excavator

Dynamic Characteristic of Power Source in Parallel Hybrid Hydraulic Excavator

A Novel Hybrid Control Strategy for Potential Energy Regeneration Systems of Hybrid Hydraulic Excavators.

A Parameter Matching Method of the Parallel Hydraulic Hybrid Excavator Optimized with Genetic Algorithm

Engine Speed Control Method of Parallel Hydraulic Hybrid Excavator

Design and Control of Hydraulic Hybrid System for Excavators

Design and Analysis of Compound Potential Energy Regeneration System for Hybrid Hydraulic Excavator.

Simulation Analysis of Potential Energy Recovery System of Hydraulic Hybrid Excavator

Modeling and control of a novel hydraulic system with energy regeneration

Improvement of boom control performance for hybrid hydraulic excavator with potential energy recovery

Power Matching Method of Parallel Hybrid Excavator

An Energy-Saving Pressure-Compensated Hydraulic System with Electrical Approach

Efficiency Analysis and Evaluation of Energy-Saving Pressure-Compensated Circuit for Hybrid Hydraulic Excavator

Optimal Design Of A Compound Hybrid System Consisting Of Torque Coupling And Energy Regeneration For Hydraulic Hybrid Excavator

Hydraulic Accumulator-Motor-generator Energy Regeneration System for a Hybrid Hydraulic Excavator