Abstract:We systematically investigate the effects of composition on the dynamic mechanical properties of bottlebrush polymer networks self-assembled by linear–bottlebrush–linear triblock copolymers. We fix the molecular architecture of the bottlebrush, which consists of 51 poly(dimethyl siloxane) (PDMS) side chains of 5 kg/mol and has a molecular weight of 255 kg/mol, and increase only the volume fraction f of the linear poly(benzyl methacrylate) (PBnMA) blocks. As f increases from 0.05 to 0.41, the network shear modulus G at room temperature increases from ∼4 to ∼100 kPa. Yet, depending on the network morphology, the relation between G and f exhibits two regimes. (i) For sphere morphology, G is nearly a constant; yet, because of a large fraction of loops, the absolute value of G is about 40% of the stiffness G m of the PDMS bottlebrush matrix. (ii) For cylinder morphology, G increases slowly with f but remains nearly 4 orders of magnitude lower than 109 Pa for the glassy cylinders formed by the end PBnMA blocks. We explain this remarkable behavior by modeling the polymer as a polycrystalline material consisting of randomly oriented grains, and each grain is a fiber-reinforced composite. We propose a modified Halpin–Tsai model to describe the shear modulus of such a polycrystalline material: G = G m(1+ζf)/(1–f), in which ζ is an adjustable parameter that describes the grain size relative to the fiber diameter. Above the glass-transition temperature of end blocks, the reinforcement to network modulus from the glassy fibers diminishes, such that G becomes a constant of the matrix stiffness. Our results not only reveal previously unexplored molecule–structure–property relations of self-assembled bottlebrush polymer networks but also provide a new class of soft, solvent-free, and reprocessable polymeric materials with a wide range of controllable stiffness.

Storage Modulus and its Characterization of Inorganic Particulate-Filled Polymer Composites

Viscoelastic Characteristics of Glass Fiber Reinforced Phenolic Materials——A Storage Modulus Modeling Methodology was Developed

A Molecular Study on the Reinforcement of Polymethylene Elastomers

Hysteresis in Glass Microsphere Filled Elastomers under Cyclic Loading

The Dynamic Mechanical Properties of EPDM/Al(OH)3 Composites

Temperature-dependence of dynamic rheological properties for high-density polyethylene filled with graphite

Determination for the Elastic Modulus of the PMMA Thin Film

Poly(ether-ketone)/silica nanocomposites: Storage modulus and hardness

Storage Life of Particle-Filled Polymer Composites Considering Aging Effects

Dynamic Mechanical Analysis of Elastic Modulus Development of Dental Composites

Dynamic Mechanical Properties of Self-Assembled Bottlebrush Polymer Networks

Optimization approach to assessing the physical and mechanical properties of polymer composites

Effects of High-Temperature Storage on the Elasticity Modulus of an Epoxy Molding Compound

Linear and nonlinear viscoelasticity of polymer/silica nanocomposites: an understanding from modulus decomposition

Effect of Interparticle Electrostatic Interactions on the Dielectric Response of 0–3 Connectivity Particle/polymer Composites for High Energy Density Storage

Experimental Analysis of Mechanical Properties about the Glass Bead-filled Polypropylene

Experimental Investigation of the Viscoelastic Deformation of PC, ABS and PC/ABS Alloys

STUDY OF THE DYNAMIC MECHANICAL PROPERTIES OF EPDM／Al(OH)3 COMPOSITES

Dynamic Rheological Behavior for Polymer Composites Filled with Particles

DYNAMIC VISCOELASTIC BEHAVIOR OF GRAPHITE FILLED HIGH DENSITY POLYETHYLENE COMPOSITES AND MODIFICATION OF MOONEY EQUATION

Storage modulus and glass transition behaviour of CdS/PMMA nanocomposites