Abstract:As a classical type of smart materials, shape memory alloys (SMAs) are of high energy density, light weight, and low actuating voltage, and therefore are of great potential to be used as actuators for robots. Major challenges in controlling an SMA-driven soft robot are the limited bandwidth and in cases with external loads. Active cooling has been demonstrated to dramatically increase its bandwidth, but external load may cause severe inaccuracy in the system modeling. Controllers that do not rely on accurate modeling of the SMA-driven soft robot is essential. In this article, we designed an elastomeric soft robotic tentacle actuated by three pieces of SMA springs with both active heating (Joule heating) and active cooling (compressed air). We proposed a multi-input-multi-output controller that directly uses the heating and cooling states of the three SMAs to control the tentacle's bending posture in three-dimensional (3-D) space. The successful implementation of the controller is attributed to a novel dual-channel control algorithm that integrates the bending motion control and swing motion control, and a state-machine controller for coordinating the three SMAs' actuations to achieve robust swing motion control. The system with such hardware and control algorithm was capable of performing bending motions with maximum actuating speed $ > $ 90 $^\circ /$ s, deactuating speed $ > $ 25 $^\circ /$ s, closed-loop motions with rapidity (6–41 $^\circ /$ s for heating, 4–19 $^\circ /$ s for cooling), accuracy (steady-state error $ < $ 0.1 $^\circ$ for no load, 0.13 $\%$ of the full range; steady-state error $ < $ 1.2 $^\circ$ with load of 1 bodyweight, 1.6 $\%$ of the full range), and load-bearing capability (dynamic load: 1 bodyweight, static load: 8.8 bodyweights). Besides, the tentacle achieved efficient motion tracking by coordinating the bending and swing motion through the controller, for both predefined trajectories and random trajectories. We demonstrated a remotely controlled 360 $^\circ$ image scanning of a room using our proposed robotic tentacle equipped with a camera at its top end to intuitively show its performances. We believe this work will advance the design and control of SMA-driven soft continuum robots for potential uses in surgery and explorations of unknown areas.

Design of Guiding Robot for Active Catheter Based on Shape Memory Alloy

Simulation research on the dynamics of shape memory alloy actuated catheter robots

Kinematics of Micro Bending Robot Using Shape Memory Alloy for Active Catheter.

Study on the Actuation and Control System of the Guiding Robot for Catheter Based on Heat Transfer Analysis

Design, Modeling, and Experimental Validation of an Active Microcatheter Driven by Shape Memory Effects

Design and Experimental Validation of an Active Catheter for Endovascular Navigation

[Study on Active Catheter for Minimally Invasive Surgery Based on Large Deflection Theory].

Dynamic simulation research on a 2-DOF catheter robot

DESIGN AND CONTROL OF NOVEL EMBEDDED SMA ACTUATORS

Robot-assisted Active Catheter Insertion: Algorithms and Experiments

Adaptive control for shape memory alloy actuated systems with applications to human–robot interaction

Kinematics Modeling of Intervention Active Catheter Based on Screw Theory

A Shape Memory Alloy-Actuated Surgical Instrument with Compact Volume

Active-Cooling-in-the-Loop Controller Design and Implementation for an SMA-Driven Soft Robotic Tentacle

Design of the mechanism and parameters for novel shape memory alloy humanoid hand

Research on the Axis Shape of an Active Catheter.

An Active Medical Supporting Manipulator and Experiments for Vascular Interventional Robot

A Compliant Actuator for Steering the Needle Within Tissue with Feedback of FBG-based Shape Sensing

Design, Modeling and Control of a 2-Dof Robotic Guidewire

Design and Control of Novel SMA Actuator