Quick analysis model for earthquake-induced landslide movement based on energy conservation
Yingbin Zhang,Xiaoqin Li,Junwen Fu,Dejian Li,Ao Dong,Haiying Fu
DOI: https://doi.org/10.1007/s10346-024-02223-x
IF: 6.153
2024-02-27
Landslides
Abstract:The sliding process and characteristics of earthquake-induced landslides are complex, and many factors affect landslide movement. The damage caused by landslides is often closely related to their movement characteristics. Therefore, establishing an efficient and quick analysis model for earthquake-induced landslide movement is very important in considering multiple control factors in the sliding process. Based on the typical characteristics of earthquake-induced landslide movement, considering the influences of earthquake action, friction characteristics of sliding surfaces, topographic relief, and morphological changes in landslide masses, a widely applicable quick analysis model for earthquake-induced landslide movement (ELQA) is constructed based on energy conservation. Compared with the existing landslide movement models, this model can consider multiple control factors and significantly improve the applicability of the model. Through comparisons with theoretical analysis, model tests, and actual landslide (Kolka glacial detrital flow), the movement distance of the landslide front edge obtained by the ELQA model matches well with the comparison results, indicating that the ELQA model can reproduce earthquake-induced landslide movement more accurately and quickly. Based on the ELQA model, the influences of control parameters (terrain sampling point density, time step, calculated point number) and calculation parameters (internal friction angle, slip mass volume, terrain concavity, and convexity characteristics) on the calculation results are studied. The results show that control parameters such as terrain sampling point density, time step, and calculated point number have limited influence on the movement characteristics; as long as appropriate values are selected, the error rate can be controlled within 5%. The calculation parameters have a significant influence on the movement characteristics. For example, the influence of the internal friction angle on the coverage area reaches up to 83.75%. The slip mass volume has an insignificant influence on the maximum movement speed, but it on the coverage area reaches approximately 20%. The influence of the terrain concavity and convexity characteristics on the results is less than 10%. The ELQA model is suitable for in-situ estimation and can provide effective suggestions for disaster prevention and reduction in earthquake-prone areas.
geosciences, multidisciplinary,engineering, geological