Abstract:Introduction: The Loess Plateau has long been plagued by cascading loess landslides. The rapid identification of these landslides, along with the accurate determination of their failure modes, is essential for conducting precise disaster assessments in the region. Such assessments are critical for minimizing both human casualties and economic losses. However, the lack of reliable reference data for the early identification of landslide failure modes has resulted in limited detection accuracy, complicating the differentiation between various failure modes. Therefore, investigating the deformation and failure characteristics of loess landslides under different failure modes is crucial for providing a scientific foundation for early hazard detection and the accurate assessment of risk profiles. Methods: This work examines the pre-slip deformation and post-slip damage characteristics of the rotational-sliding Huzhu Landslide and the translational-sliding Zhongzhai Landslide through a combination of field investigations, unmanned aerial vehicle surveys, and remote sensing interpretation. Physical model tests were conducted to simulate the instability and failure processes of both rotational and translational loess landslides. Meanwhile, three-dimensional models and orthophoto graphic images at various stages of the landslides were generated using Contexcapture. Results: The initial stages of rotational sliding landslides are marked by the formation of distinct tensile cracks at the trailing edge of the slope and minor uplift at the front. As the uplift at the front progresses and numerous extension fissures develop, the stability of the landslide reduces progressively. Upon reaching instability, the sliding velocity of the sliding mass initially accelerates before decelerating, with majority of the mass remaining on the sliding surface and retaining relatively well structural integrity. At the trailing edge of the landslide, characteristic features such as falling scarps, fractured walls, and sunken grooves can be observed, while the front displays significant bulging phenomena. In contrast, translational sliding landslides are initially characterized by minor tensile cracks at the trailing edge and pronounced deformation at the front. As these tensile cracks propagate, the landslide are prone to sudden instability under external triggering factors. Following the onset of instability, the sliding mass undergoes rapid movement, with only a small part of the mass remaining on the sliding surface. Discussion: Landslides triggered by different factors and occurring under varying water content conditions may exhibit significant differences in their pre-failure behavior and post-failure characteristics. Thus, it is imperative to conduct further research in this field to better understand these complex dynamics.

Quick analysis model for earthquake-induced landslide movement based on energy conservation

Dynamic Simulation and Analysis of High-Speed and Long Run-Out Landslide Triggered by the Wenchuan Earthquake, China

Travel Distances of Earthquake-induced Landslides

Application of Logistic Regression Model for Hazard Assessment of Landslides Caused by the 2012 Yiliang Ms 5.7 Earthquake in Yunnan Province, China

Quantitative Risk Assessment of Landslides with Direct Simulation of Pre-Failure to Post-Failure Behaviors

Sliding element simulating the response of slip surfaces and its application for the prediction of earthquake-induced landslide movement using one-dimensional dynamic analyses

Failure Mechanism Analysis of Loess Slope Under the Coupling Effect of Rainfall and Earthquake Using Shaking Table Test

Assessment of earthquake-induced landslide hazard zoning using the physics-environmental coupled Model

Modeling of rapid evaluation for seismic stability of soil slope by finite element limit analysis

Dynamic Analysis of the High-Speed and Long-Runout Landslide Movement Process Based on the Discrete Element Method: A Case Study of the Shuicheng Landslide in Guizhou, China

Dynamic Earthquake-Induced Landslide Susceptibility Assessment Model: Integrating Machine Learning and Remote Sensing

Near-real-time Prompt Assessment for Regional Earthquake-Induced Landslides Using Recorded Ground Motions

Early identification on failure mode of loess landslide: insight from case study and physical model experiment

DDA simulation of Qianjiangping landslide movement

Quantitative spatial distribution model of site-specific loess landslides on the Heifangtai terrace, China

A solution for evaluating stability and sliding direction of 3D earthquake landslides

A Discrete Element Analysis of the Sliding Friction Heat in High-Speed and Long-Runout Landslides

Seismic Signal Characteristics and Numerical Modeling Analysis of the Xinmo Landslide

Simulation and prediction of dynamic process of loess landslide and its impact damage to houses

Evaluation of dynamic stability and analysis of reinforcement measures of a landslide under seismic action: a case study on the Yanyangcun landslide

Application of different earthquake-induced landslide hazard assessment models on the 2022 Ms 6.8 luding earthquake