Abstract:In vertical-up laser mirror welding, the keyhole dynamics and flow behavior of molten pool play crucial roles in weld quality, yet the mechanisms of these coupling dynamics have not been well clarified. In this work, a three-dimensional transient model for simulation of vertical-up laser mirror welding process was carried out to account for the flow behavior of molten pool and dynamic evolution characteristics of keyhole. Two laser heat sources with regard to laser mirror welding were also taken into consideration in the combined heat source model. It is proved that the simulation results are basically consistent with the experimental data. The simulation results indicate that the morphology and flow field distribution of upper and lower molten pool both exhibit a high degree of consistency on the X–Y section, while significant difference is visible on the X-Z section. Before keyhole coupling, the high velocity fluid exists on the surface of molten pool and tends to increase the diameter of keyhole, of which the maximum velocity reaches 5.26 m s −1 . During the keyhole coupling process, the coupled keyhole in the center area is found to fall, which results in deteriorated coupling process. Force analysis of keyhole illustrates that the resultant force on the X–Y section points to the direction of increasing the depth and diameter of keyhole before and during the keyhole coupling process. In contrast, the resultant force on the X-Z section is conductive to keyhole coupling occurring at the lower position. After keyhole coupling, the diameter of coupled keyhole in the center zone is increased and the fluid velocity is reduced to 0.109 m s −1 , contributing to a firm connection.

Recent Advance in Research for Keyhole Behavior During Laser Deep Penetration Welding Process

Modelling of Keyhole Dynamics and Porosity Formation Considering the Adaptive Keyhole Shape and Three-Phase Coupling During Deep-Penetration Laser Welding

Influence mechanism of the keyhole behavior on penetration depth by in-situ monitoring in pulsed laser welding of aluminum alloy

Simulation of the Effect of Keyhole Instability on Porosity during the Deep Penetration Laser Welding Process

Effect of Laser-Matter Interaction on Molten Pool Flow and Keyhole Dynamics

Measurement of pulsed laser welding penetration based on keyhole dynamics and deep learning approach

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Enhanced Penetration Depth during Reduced Pressure Keyhole-Mode Laser Welding

Droplet Transfer Induced Keyhole Fluctuation and Its Influence Regulation on Porosity Rate during Hybrid Laser Arc Welding of Aluminum Alloys

Numerical study of keyhole-induced porosity suppression mechanism in laser welding with beam oscillation

Numerical analysis of coupling dynamics of keyhole and molten pool in vertical-up laser mirror welding of 2219 aluminum alloy

Fundamental understanding of open keyhole effect in plasma arc welding

Keyhole stability during laser welding—Part II: process pores and spatters

Keyhole dynamic status and spatter behavior during welding of stainless steel with adjustable-ring mode laser beam

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Study on keyhole characteristics and weld pool dynamics of Ti6Al4V alloy fabricated by continuous wave laser beam welding

Influence of the spatial laser energy absorption on the molten pool dynamics in high-power laser beam welding

Visualization and simulation of 1700MS sheet laser welding based on three-dimensional geometries of weld pool and keyhole

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Numerical analysis of the effect of an oscillating metal vapor plume on the keyhole and molten pool behavior during deep penetration laser beam welding

Modeling and numerical study of keyhole-induced porosity formation in laser beam oscillating welding of 5A06 aluminum alloy