Abstract:Chemical vapor deposition (CVD) diamond grinding wheels are used in precision and ultra-precision grinding owing to the high grain density, uniform dispersion of abrasives, and excellent wear resistance. However, the small chip space on the CVD diamond abrasive surface easily interrupts the grinding, which limits the practical applications of these wheels. In this paper, a novel micro-structured CVD diamond wheel was presented for precision grinding of optical glass, to improve the grinding performance. First, continuous and clear micro grooves of 4–6 µm width and 8 µm depth were ablated on the surface of a CVD diamond by a pulsed laser. Different from the conventional structured wheels, the grain size of the CVD diamond was refined from 10 to 20 µm to 5–15 µm by laser micro-structuring. Second, the effect of the micro-structures on the grinding force, force ratio, and ground quality were investigated for optical glass. The normal forces decreased by 48–65%, whereas the tangential force dropped by 25–54%. The normal-to-tangential grinding ratio also clearly reduced owing to the increasing abrasive edges and change in the rake angle of most grains. The measurement results of the ground surface showed that roughness R a decreased by 5–20% and subsurface damage depth reduced by approximately 25%. In addition, the wear morphology exhibited that abrasion flattening occurred not only on the CVD diamond grain tips but also on the side edges of the micro grooves. This implied that the micro-structures effectively participated in the grinding process, and thus, resulted in an increase in the grain density and enhancement of the cutting effort.

Surface and Subsurface Integrity in Diamond Grinding of Optical Glasses on Tetraform ‘C’

Controllable Diamond Cutting of Structured Surfaces with Subnanometric Height Features on Silicon

Ultra-Precision Cutting Of Fresnel Lenses On Single Crystal Germanium And The Machining Processing Analysis

Investigation of Surface Integrity Induced by Ultra-Precision Grinding and Scratching of Glassy Carbon

Grinding damage of BK7 using copper-resin bond coarse-grained diamond wheel

Preparation of surface micro-structured coarse-grained diamond wheels based on high efficiency mechanical conditioning and picosecond pulsed laser machining

Study on the material removal mechanism and the exit breakage of ultrasonic vibration-assisted grinding for microcrystalline glass

Micro-grooving of brittle materials using textured diamond grinding wheels shaped by an integrated nanosecond laser system

Thermal analysis of in-situ laser assisted diamond cutting of fused silica and process optimization

Ultra-precision Machining of Hard and Brittle Materials with Coarse-Grained Grinding Wheels

Ultraprecision Ductile-Regime Cutting of Optical Glass

Tool Wear and Surface Finish in Diamond Cutting of Optical Glass

Improvement of precision grinding performance of CVD diamond wheels by micro-structured surfaces

Brittle–ductile Transition in the Diamond Cutting of Glasses with the Aid of Ultrasonic Vibration

Surface damage characteristics and identification based on acoustic emission in diamond point grinding carbon/carbon ceramic matrix composites

Effects of processing parameters and grinding direction on the material removal mechanism of (100) surface single crystal diamond in self-rotating mechanical grinding

Mechanism of Surface Defects in Ultra-Precision Machining of Sesquioxide Laser Crystal Tm: GdScO3

Theoretical and experimental investigation on surface generation and subsurface damage in fixed abrasive lapping of optical glass

Novel surface characteristics observed during grinding of polycrystalline diamond

Assessment of sub-micron subsurface damage in glass

Influence of Glassy Carbon Surface Finishing on Its Wear Behavior during Precision Glass Moulding of Fused Silica