Abstract:The micro hybrid spiral-grooved thrust bearing is a promising candidate to support the rotating elements in power MEMS devices such as micro gas turbine engines. However, the realization of hybrid thrust bearings has encountered a number of technical challenges due to the very high rotating speed and DN number (the product of the inner diameter and the rotational speed of the bearing, mm · rpm) to achieve high power density, the super thin gas film between rotors and thrust pad, and the relative large fabrication uncertainties according to the imperfection of the fabrication technology. In this paper, the configuration of a micro hybrid spiral-grooved thrust bearing for power MEMS is designed, and the steady and dynamic characteristics of this kind of bearing are then analyzed comprehensively, with the consideration of both the rarefaction effects and the influence of potential microfabrication defects. The nonlinear equations of molecular gas-film lubrication describing the gas rarefaction effects in a micro hybrid bearing are discretized by the finite volume method and solved by the Newton–Raphson techniques. The small perturbation technique is employed to study the dynamic behavior of a micro hybrid bearing. The results show that the micro hybrid thrust bearing exhibits better steady-state and dynamic performance than the existing micro hydrodynamic and hydrostatic bearings and that the hybrid bearings are likelier to be stable than their hydrodynamic counterparts, especially when the frequency number is high. The load capacity of the micro hybrid bearing increases slightly with the number of orifices and gradually with the diameter ratio of the orifice. The microfabrication defects of clogged orifices could lessen the load capacity and the dynamic coefficients of the hybrid thrust bearing. The model developed in this paper can serve as a useful tool to provide insight into micro hybrid gas thrust bearing-rotor systems.

Progress of Bearings in Micro Rotating Machinery

Dynamic Lubrication of Micro Gas Bearings at an Ultra High Speed

Study on Dynamics of Micro Gas Journal Bearing--rotor System

Characteristics of the Gas Journal Bearing in Micro-rotor Systems

Progress of Micro-tribology on Micro-electro-mechanical Sy Stems

Micro-rotor Dynamics for Micro-Electro-mechanical Systems (MEMS)

Progress of Wear Properties on Micro-Electro-Mechanical Systems

Experimental and numerical study on the mixed lubrication performances of a new bearing

On the Performance of Gas-Lubricated Bearing-Rotor System in Microengine

Study on Micro-Scale Gas Slider Bearing w ith Direct Simulation Monte Carlo Method

Modeling and Analysis of Micro Hybrid Gas Spiral-Grooved Thrust Bearing for Microengine

Research On Static And Dynamic Characteristics Of Gas-Lubricated Microbearings For Microfluidic Devices

Effect of Boundary Conditions on the Performances of Gas-Lubricated Micro Journal Bearing

Characteristics analysis and dynamic responses of micro-gas-lubricated journal bearings with a new slip model

Effect of Effective Viscosity on Performance of Micro Gas Journal Bearings

Investigation on the Micro Interface Lubrication Mechanism of Water Lubricated Bearing of Large Ships

Experimental and numerical exploration on the nonlinear dynamic behaviors of a novel bearing lubricated by low viscosity lubricant

Non-Linear Dynamic Analysis of the Ultra-Short Micro Gas Journal Bearing-Rotor Systems Considering Viscous Friction Effects

Steady performance of a micro gas-lubricated bearing

Performance Analysis of Aerostatic Journal Micro-Bearing and Its Application to High-Speed Precision Micro-Spindles

Numerical Prediction of Surface Roughness Effect on Slip Flow in Gas-Lubricated Journal Microbearings