Visualization of compressibility effects on large-scale structures in compressible mixing layers

Xiaotian Shi,Jun Chen,Zhensu She

DOI: https://doi.org/10.1007/s12650-010-0046-x

IF: 1.7

2010-01-01

Journal of Visualization

Abstract:Graphical Abstract

What problem does this paper attempt to address?

Compressibility Effect in Compressible Turbulent Channel Flows

Zhang Peng,Song Yubin,Xia ZhenHua

DOI: https://doi.org/10.1360/sspma-2022-0491

2023-01-01

Abstract:In this study, direct numerical simulations are carried out in compressible turbulent channel flows at Mach numbers 3 and 4.3. Combining the previous numerical cases with Mach numbers 0.3, 0.5 and 1.5, a compressible turbulent channel flow database covering the Mach number range from 0.3 to 4.3 at bulk Reynolds number approximately 6000 is obtained. Using this database, we studied the statistical behavior of the flow fields, the velocity and temperature streak structures, and the balance equation of temperature variance. The results show that the statistics related to the velocity field, the temperature field, and the velocity-temperature coupling quantities show better collapse behaviors in the semi-local coordinates, which demonstrates that the turbulent statistics depend mainly on the mean density and viscosity, indicating that the Morkovin hypothesis is applicable in the current Mach number range (0.3-4.3). Furthermore, the findings demonstrate that at high Mach numbers, compressibility is significantly enhanced, which makes the near-wall streak structures more stable. However, the proportion of the dilatation dissipation (due to the compressibility) in the total turbulent dissipation is still small and can be ignored.
Velocity Transformation for Compressible Wall-Bounded Turbulence—an Approach Through the Mixing Length Hypothesis

Xuke Zhu,Yubin Song,Xiaoshuo Yang,Zhenhua Xia

DOI: https://doi.org/10.1007/s11433-024-2420-5

2024-01-01

Abstract:In an endeavor to establish a connection between the mean velocity profile in compressible wall-bounded turbulence and its incompressible analogue, a refined version of the Trettel and Larsson’s (TL) transformation is systematically derived and rigorously assessed across diverse flow scenarios. Incorporating the recently proposed intrinsic compressibility effects and modeling the multi-layer structure of mixing lengths, the proposed transformation demonstrates exceptional performance in collapsing 57 canonical flow cases, including cooled channel and pipe flows, channel flows with pseudo heat sources, as well as adiabatic and diabatic boundary layer flows. Furthermore, the transformation seamlessly extends to low Reynolds number cooled channel and pipe flows, achieving a level of accuracy unparalleled by other transformations in the current state-of-the-art.
MULTI-SCALE STRUCTURES IN COMPRESSIBLE TURBULENT MIXING LAYERS

TIE-JIN WANG,XIAO-TIAN SHI,JUN CHEN,ZHEN-SU SHE

DOI: https://doi.org/10.1142/S0217984910023797

2011-01-01

Modern Physics Letters B

Abstract:A size-dependent gradient method is used to study the Mie scattering visualization of the compressible turbulent mixing layers at two convective Mach numbers M-c = 0.107 and 0.474 in order to reveal multi-scale structures. Coherent vortices and inclined wavy structures are clearly visualized by applying the method. Similarity between the grey-level and the velocity fluctuations is discovered with the spectral analysis. These results suggest away to capture turbulent structures from scalar fields.
Numerical flow visualization of a mixing layer

Jianzhong Lin,Zhaosheng Yu,Xueming Shao

1998-01-01

Journal of Hydrodynamics

Abstract:Kelvin-Helmhotz roll up of the 3-D time-developing mixing was simulated numerically. The dye lines or fluid interfaces were presented by computing a passive scalar at high Peclet number. The hydric bubbles were also simulated numerically. To help understanding the visualization results, the behaviour of coherent structures were analyzed. A comparison between vortical structure and passive scalar contours indicates that the wrapping by the vortices largely dominates the evolution of passive scalar.
Direct Numerical Simulation of a Three-Dimensional Spatially Evolving Compressible Mixing Layer Laden with Particles. I. Turbulent Structures and Asymmetric Properties

Qi Dai,Tai Jin,Kun Luo,Jianren Fan

DOI: https://doi.org/10.1063/1.5099469

IF: 4.6

2019-01-01

Physics of Fluids

Abstract:With the Eulerian-Lagrangian point-source method, the effects of dispersed particles on turbulent structures and asymmetric properties are systematically investigated in a three-dimensional spatially evolving compressible mixing layer with the convective Mach number up to 1.2. Particles interact with the mixing layer through two-way coupling, and three simulations with different particle diameters are conducted and compared with the particle-free flow. The underlying mechanisms responsible for the mixing layer asymmetry are also revealed through analyzing the self-similar equations of the particle-laden spatially evolving compressible mixing layer. The compressible mixing layer is significantly asymmetric on the high- and low-speed sides. The low-speed layer possesses more vortices and less shocklets compared with the high-speed layer in the fully developed region, and the shear layer center tends to skew toward the low-speed stream, which is due to the streamwise momentum gradient. Small particles augment the mixing layer asymmetry with more vortices and shocklets in the low-speed stream, which is attributed to the small inertia and the larger streamwise velocity of particles than fluid across the mixing layer. However, large particles attenuate the asymmetry of the mixing layer where the vortical structures on the low-speed side are further reduced and the shocklets are barely existent in both the layers, which is ascribed to the large inertia and the stronger effect of particle back-reaction on the low-speed fluid than that on the high-speed fluid.
Interfaces of high- and low-speed large-scale structures in compressible turbulent mixing layers: compressibility effects and structures

Xiaoning Wang,Jing Guo,Jianchun Wang,Shiyi Chen

DOI: https://doi.org/10.1017/jfm.2024.55

IF: 3.7

2024-02-16

Journal of Fluid Mechanics

Abstract:Direct numerical simulations of temporally developing mixing layers have been performed to investigate the effects of compressibility on statistics and structures near the interfaces of high- and low-speed large-scale structures (LSSs), covering a range of convective Mach numbers from to and Taylor Reynolds numbers up to 290. The interfaces of LSSs are directly defined by the isosurface of zero fluctuating streamwise velocity. The characteristic velocity jump at the interfaces grows rapidly in the transition stage and then decreases until reaching a gradual self-similar stage. The evolution of velocity jump is evidently delayed as the convective Mach number increases. The interface layer is formed by the shearing motion of neighbouring LSSs. A small vortical motion characterized by the Kolmogorov scale is induced in the interface layer by shear-dominated outer regions. The strengths of outer shearing motion and central vortical motion are greater at the leading edge, but smaller at the trailing edge, which is also reflected in a larger velocity jump at the leading edge. As the convective Mach number increases, the small-scale vortical structure is obviously suppressed by compressibility. At high convective Mach number , the compressive shear-dominated outer regions are linked with a sheet-like structure passing through the centre of the expansion region corresponding to a small-scale vortical structure. The compressibility and shearing strength near the interface are highly dependent on the interface orientation.

mechanics,physics, fluids & plasmas
Three-Dimensional Experimental Study of Compressibility Effects on Turbulent Free Shear Layers

Kevin U. Kim,Gregory S. Elliott,J. Craig Dutton

DOI: https://doi.org/10.2514/1.J058556

IF: 2.624

2019-11-25

AIAA Journal

Abstract:Turbulent planar mixing layers of varying compressibility levels have been studied experimentally via flow visualization techniques, pressure measurements, and stereoscopic particle image velocimet...

engineering, aerospace
Vortex Structures and Mixing of Compressible Mixing Layer

Zhou Qian

2014-01-01

Abstract:Using the seventh-order upwind compact scheme for spatial discretization of the convective flux,the explicit central eighth-order scheme for viscous flux terms,the unsteady three-dimensional compressible Navier-Stokes equations are solved for the compressible spatially evolving plane mixing layer.The direct numerical simulation(DNS)is performed without resorting to any sub-grid models.The convective Mach number of the mixing layer is chosen to be 0.7for characterizing the moderate compressibility.The finite difference grid size is 4160×351×256.The spatial developing structures are shown in detail from the initial instability flow until the full development of turbulent flow.The results show that the large-scale vortex structures,such asΛvortices,hairpin vortices and flower structures,make the momentum thickness grow rapidly along the streamwise flow.The discussions are focused on the capacity of the moderate compressible shear layer to mix the fluids from the two different sides.It is found that the large-scale vortex structures significantly affect the thickness of the visual layer thickness shown by the mass fraction of the passive scalar.Particularly,strong pumping flows between the two counter-rotating vortices ofΛvortices as well as hairpin vortices injects large amounts of fluid from one side to the other side.The small vortices contained in the flower structures also help mix the fluids through their energetic twisting motion,only at a relatively small scale.Generally speaking,the dynamic evolution of these large-scale vortex structures produces very curvy interfaces between the upper side and the lower side,and the large contact area of the curvy interfaces appreciably enhances the mixing between the fluids from the two sides.The fine scale structures in the fully developed turbulence play an important role in making the mixing of the shear layer more uniform.However the contribution of the fully developed turbulence to the visual mixing layer growth is very limited.
Numerical Simulation of Compressible Mixing Layers

Song Fu,Qibing Li

DOI: https://doi.org/10.1016/j.ijheatfluidflow.2006.03.028

IF: 2.643

2006-01-01

International Journal of Heat and Fluid Flow

Abstract:Three-dimensional spatially developing compressible planar mixing layers are studied numerically for convective Mach number Mc=0.4, 0.8 and 1.2. The present results for the flow-field structures, the mean velocity profiles, the mixing-layer growth rate and Reynolds stresses agree well with those of experiments and other numerical studies. The normalized growth rate decreases with increasing Mc. Shocklets are found to exist in the mixing layer at Mc=1.2 and their formation mechanism shows good agreement with the scenario of flow around a bluff body. The effect of compressibility on the large-scale structures is stronger than that on the small-scale ones. The budget of the Reynolds-stress transport equations agree well with that from the temporal developing results. The magnitudes of most of the contributing terms in the budget reduce with increased compressibility effect except for the pressure-dilatation term which is very small.
The three-dimensional vortical structure in time-developing mixing layer with cross shear

Shen Liping,Lin Jianzhong,Fu Bin

1996-01-01

Abstract:A new method used to describe three-dimensional mixing layers with discrete vortex filaments is studied. Based on this method, the three-dimensional mixing layers are computed numerically. The vortical structure, distribution of mean velocity and momentum loss thickness in different time are given. The effects of shear rate and intensity of disturbance on flows are analysed. Some computed results are compared with experimental ones, they show a good agreement. The results given in the paper are helpful to understand such flows.
Wavelet Analysis of Coherent Structures in a Three-Dimensional Mixing Layer

Lin Jianzhong,Shao Xueming,Ni Limin

DOI: https://doi.org/10.1007/bf02487523

2002-01-01

Abstract:Wavelet analysis is applied to the results obtained by the direct numerical simulation of a three-dimensional (3D) mixing layer in order to investigate coherent structures in dimension of scale. First, 3D orthonormal wavelet bases are constructed, and the corresponding decomposition algorithm is developed. Then the Navier-Stokes equations are transformed into the wavelet space and the architecture for multi-scale analysis is established. From this architecture, the coarse field images in different scales are obtained and some local statistical quantities are calculated. The results show that, with the development of a mixing layer, the energy spectrum densities for different wavenumbers increase and the energy is transferred from the average flow to vortex structures in different scales. Due to the non-linear interactions between different scales, cascade processes of energy are very complex. Because vortices always roll and pair at special areas, for a definite scale, the energy is obtained from other scales at some areas while it is transferred to other scales at other areas. In addition, energy dissipation and transfer always occur where an intense interaction between vortices exists.
Direct Numerical Simulation of A Spatially Developing Compressible Plane Mixing Layer: Flow Structures and Mean Flow Properties

Qiang Zhou,Feng He,M. Y. Shen

DOI: https://doi.org/10.1017/jfm.2012.400

IF: 3.7

2012-01-01

Journal of Fluid Mechanics

Abstract:The spatially developing compressible plane mixing layer with a convective Mach number of 0.7 is investigated by direct numerical simulation. A pair of equal and opposite oblique instability waves is introduced to perturb the mixing layer at the inlet. The full evolution process of instability, including formation of Lambda-vortices and hairpin vortices, breakdown of large structures and establishment of self-similar turbulence, is presented clearly in the simulation. In the transition process, the flow fields are populated sequentially by Lambda-vortices, hairpin vortices and 'flower' structures. This is the first direct evidence showing the dominance of these structures in the spatially developing mixing layer. Hairpin vortices are found to play an important role in the breakdown of the flow. The legs of hairpin vortices first evolve into sheaths with intense vorticity then break up into small slender vortices. The later flower structures are produced by the instability of the heads of the hairpin vortices. They prevail for a long distance in the mixing layer until the flow starts to settle down into its self-similar state. The preponderance of slender inclined streamwise vortices is observed in the transversal middle zone of the transition region after the breakup of the hairpin legs. This predominance of streamwise vortices also persists in the self-similar turbulent region, though the vortices there are found to be relatively very weak. The evolution of both the mean streamwise velocity profile and the Reynolds stresses is found to have close connection to the behaviour of the large vortex structures. High growth rates of the momentum and vorticity thicknesses are observed in the transition region of the flow. The growth rates in the self-similar turbulence region decay to a value that agrees well with previous experimental and numerical studies. Shocklets occur in the simulation, and their formation mechanisms are elaborated and categorized. This is the first three-dimensional simulation that captures shocklets at this low convective Mach number.
3d Numerical Simulation Of A Planar Compressible Free Mixing Layer

song fu,qibing li

DOI: https://doi.org/10.1007/978-3-642-59334-5_31

2003-01-01

Abstract:In this paper Xu's gas-kinetic BGK scheme is simplified based on the conservative constraint and then applied in the simulation of 3-D planar compressible mixing layer with M-c = 0.4, 0.8 and 1.2. The numerical results here provide the flow-field structure, the characteristic of velocity fluctuation. The velocity fluctuation intensity and shear stresses are in good agreement with experimental and existing numerical results. The normalized growth rate agrees well with experimental results.
Direct Numerical Simulation of Compressible Binary Species Mixing Layer

SUN Xiao-bo,FAN Xue-jun,LU Xi-yun

DOI: https://doi.org/10.3969/j.issn.0253-2778.2007.10.020

2007-01-01

Journal of University of Science and Technology of China

Abstract:Compressible binary species mixing layer was investigated using direct numerical simulation to solve the three-dimensional compressible Navier-Stokes and species equations.The effects of the density ratio of binary species and compressible effect were mainly discussed.Results show that,as the density ratio increases,the growth rate of the disturbances in the mixing layer decreases.In the early stage of the the mixing layer evolution,the compressible effect,especially the baroclinic effect,dominates the dynamics of the vortex;in the later stage,the compressibility becomes weak and the stretching effect plays a dominant role.The transition and evolution of the coherent structures were also analyzed.
Numerical simulations of compressible mixing layers with a discontinuous Galerkin method

Xiao-Tian Shi,Jun Chen,Wei-Tao Bi,Chi-Wang Shu,Zhen-Su She

DOI: https://doi.org/10.1007/s10409-011-0433-0

IF: 3.5

2011-01-01

Acta Mechanica Sinica

Abstract:Discontinuous Galerkin (DG) method is known to have several advantages for flow simulations, in particular, in flexible accuracy management and adaptability to mesh refinement. In the present work, the DG method is developed for numerical simulations of both temporally and spatially developing mixing layers. For the temporally developing mixing layer, both the instantaneous flow field and time evolution of momentum thickness agree very well with the previous results. Shocklets are observed at higher convective Mach numbers and the vortex paring manner is changed for high compressibility. For the spatially developing mixing layer, large-scale coherent structures and self-similar behavior for mean profiles are investigated. The instantaneous flow field for a three-dimensional compressible mixing layer is also reported, which shows the development of large-scale coherent structures in the streamwise direction. All numerical results suggest that the DG method is effective in performing accurate numerical simulations for compressible shear flows.
Wavy structures in compressible mixing layers

Jun Chen,Xiao-Tian Shi,Tie-Jin Wang,Zhen-Su She

DOI: https://doi.org/10.1007/s10409-013-0076-4

IF: 3.5

2013-01-01

Acta Mechanica Sinica

Abstract:Semi-periodic structures namely inclined wavy structures (IWS) are experimentally observed in compressible mixing layers at two convective Mach numbers ( M c = 0.11 and 0.47). Flow structures are visualized by the laserinduced planar laser Mie scattering (PLMS) technique. Two methods are developed to investigate the spatial distribution and geometry of IWS: (1) the dominant mode extraction (DME) method, to extract the dominant modes of IWS from the streamwise gray-level fluctuation, and (2) the phase tracking (PT) method, to identify the shape of IWS. The results suggest that pressure perturbations account for the formation of IWS in the initialmixing region and the joint effect of dilatation and coherent vortices enhances IWS in the welldeveloped region. The large transverse (cross-flow) scale of the IWS and their relation to coherent vortices (CV) indicate that the disturbance originated from CV in the mixing center propagates far into the free streams. The DME and the PT method are shown to be the effective tools to study the geometrical features of wavy structures in compressible shear flows.
NUMERICAL RESEARCH ON THE COHERENT STRUCTURES IN A MIXING LAYER WITH CROSS-SHEAR

J.-Z. LIN,Z.-S. YU,X.-M. SHAO

DOI: https://doi.org/10.1006/jfls.2001.0432

IF: 3.482

2002-01-01

Journal of Fluids and Structures

Abstract:The evolution of a time-developing mixing layer with cross-shear is simulated numerically using a pseudo-spectral method. The results indicate that stretching by the rollers is responsible for the formation of the streamwise vortices in a mixing layer with cross-shear. When the cross-shear is relatively strong (such as θ=20°), the co-rotating streamwise vortices related to the early spanwise Kelvin–Helmholtz instability are intensified rapidly by stretching and collapse into rib-shaped vortices, which are very similar to the ribs in a plane mixing layer. Atθ =20°, the vortex corresponding to the “quadrupole” in a plane mixing layer is also observed in the core region, and a set of streamwise vortices with signs opposite to those of the vortices containing the ribs lie at the spanwise braid region. The counterparts of the ribs, however, are of flat shape and much weaker. When θ is up to 30°, the ribs are so strong that their counterparts cannot develop. When θ is down to 10°, the symmetry of the streamwise vortices is more obvious, but the ribs do not form. Additionally, it is revealed that the introduction of the strong cross-shear results in enhanced mixing compared to a two-dimensional mixing layer.
Effect of Compressibility on the Small-Scale Structures in Isotropic Turbulence

Jianchun Wang,Yipeng Shi,Lian-Ping Wang,Zuoli Xiao,X. T. He,Shiyi Chen

DOI: https://doi.org/10.1017/jfm.2012.474

IF: 3.7

2012-01-01

Journal of Fluid Mechanics

Abstract:Using a simulated highly compressible isotropic turbulence field with turbulent Mach number around 1.0, we studied the effects of local compressibility on the statistical properties and structures of velocity gradients in order to assess salient small-scale features pertaining to highly compressible turbulence against existing theories for incompressible turbulence. A variety of statistics and local flow structures conditioned on the local dilatation - a measure of local flow compressibility - are studied. The overall enstrophy production is found to be enhanced by compression motions and suppressed by expansion motions. It is further revealed that most of the enstrophy production is generated along the directions tangential to the local density isosurface in both compression and expansion regions. The dilatational contribution to enstrophy production is isotropic and dominant in highly compressible regions. The emphasis is then directed to the complicated properties of the enstrophy production by the deviatoric strain rate at various dilatation levels. In the overall flow field, the most probable eigenvalue ratio for the strain rate tensor is found to be -3:1:2.5, quantitatively different from the preferred eigenvalue ratio of -4:1:3 reported in incompressible turbulence. Furthermore, the strain rate eigenvalue ratio tends to be -1:0:0 in high compression regions, implying the dominance of sheet-like structures. The joint probability distribution function of the invariants for the deviatoric velocity gradient tensor is used to characterize local flow structures conditioned on the local dilatation as well as the distribution of enstrophy production within these flow structures. We demonstrate that strong local compression motions enhance the enstrophy production by vortex stretching, while strong local expansion motions suppress enstrophy production by vortex stretching. Despite these complications, most statistical properties associated with the solenoidal component of the velocity field are found to be very similar to those in incompressible turbulence, and are insensitive to the change of local dilatation. Therefore, a good understanding of dynamics of the compressive component of the velocity field is key to an overall accurate description of highly compressible turbulence.
Modelling the Compressibility Effect with Second-Moment Closure

S. Fu,S. Y. Huang

DOI: https://doi.org/10.1007/978-3-540-75999-7_41

IF: 4.391

2007-01-01

Computational Mechanics

Abstract:Compressibility is well known to suppress turbulence, the cause of the compressibility effects remains, however, unclear. Previous studies carried out in the early 1990s conjectured that the main compressible effects were associated with the dilatations of velocity fluctuation. Later, it was shown that the main compressibility effect came from the reduced pressure-strain term due to reduced pressure fluctuations. Although better understanding of the compressible turbulence had generally been achieved with the increased DNS and experimental efforts, there are still some discrepancies among these recent findings. In the present work the effect of compressibility on shear flows are characterized in three categories corresponding to three regions of turbulent Mach numbers M t : the low-M t , the transition-M t ; and the high-M t ; regions. It is observed in these three regions that the effect of compressibility on the growth rate of the turbulent mixing layer is rather different. A simplified approach to model the reduced pressure-strain effect may not necessarily reduce the mixing-layer growth rate, rather, an increase in the growth rate may occur. The present work develops a new second-moment model for the compressible turbulence through the introduction of some blending functions of M t to account for the compressibility effects on the flow. The model has successfully applied to the compressible mixing layers.
Effect of Suspended Solid Particles on Unstability of Two-Dimension Mixing Layer

Zhou Zexuan,Lin Jianzhong

DOI: https://doi.org/10.1007/bf02454113

1997-01-01

Applied Mathematics and Mechanics

Abstract:By considering the effect of suspended solid particles in the ordinary equations for two-dimension inviscid incompressible mixing layer, the Rayleigh equation and the modified Rayleigh equation are obtained. And then, by solving the corresponding eigen-value equations with numerical computational method, the relation curves between perturbation frequency and spacial growth rate of the mixing layer for the varying particle loading, ratio of particle velocity to fluid velocity and Stokes number are got. Sever al important conclusions on the effect of suspended solid particles on unstability of the mixing layer are presented in the end by analyzing all the relation curves.

Visualization of compressibility effects on large-scale structures in compressible mixing layers

Compressibility Effect in Compressible Turbulent Channel Flows

Velocity Transformation for Compressible Wall-Bounded Turbulence—an Approach Through the Mixing Length Hypothesis

MULTI-SCALE STRUCTURES IN COMPRESSIBLE TURBULENT MIXING LAYERS

Numerical flow visualization of a mixing layer

Direct Numerical Simulation of a Three-Dimensional Spatially Evolving Compressible Mixing Layer Laden with Particles. I. Turbulent Structures and Asymmetric Properties

Interfaces of high- and low-speed large-scale structures in compressible turbulent mixing layers: compressibility effects and structures

Three-Dimensional Experimental Study of Compressibility Effects on Turbulent Free Shear Layers

Vortex Structures and Mixing of Compressible Mixing Layer

Numerical Simulation of Compressible Mixing Layers

The three-dimensional vortical structure in time-developing mixing layer with cross shear

Wavelet Analysis of Coherent Structures in a Three-Dimensional Mixing Layer

Direct Numerical Simulation of A Spatially Developing Compressible Plane Mixing Layer: Flow Structures and Mean Flow Properties

3d Numerical Simulation Of A Planar Compressible Free Mixing Layer

Direct Numerical Simulation of Compressible Binary Species Mixing Layer

Numerical simulations of compressible mixing layers with a discontinuous Galerkin method

Wavy structures in compressible mixing layers

NUMERICAL RESEARCH ON THE COHERENT STRUCTURES IN A MIXING LAYER WITH CROSS-SHEAR

Effect of Compressibility on the Small-Scale Structures in Isotropic Turbulence

Modelling the Compressibility Effect with Second-Moment Closure

Effect of Suspended Solid Particles on Unstability of Two-Dimension Mixing Layer