Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

Numerical Simulation Study on Chemical Kinetics Mechanism of Biodiesel Combustion

Numerical Study of the Effects of Biodiesel Unsaturation on Combustion and Emission Characteristics in Diesel Engine

Numerical Study of Soot Particles from Low Temperature Combustion of Engine Fueled with Diesel Fuel and Unsaturation Biodiesel Fuels

Numerical simulation of diesel combustion based on n-heptane and toluene

A realistic skeletal mechanism for the oxidation of biodiesel surrogate composed of long carbon chain and polyunsaturated compounds

Numerical simulation of diesel combustion based on the soot detailed kinetic model

Numerical Simulation for Combustion of Droplet with Volume of Fluid Formulation

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

Development of a reduced oxidation mechanism with low-temperature chemistry for real biodiesel methyl esters

Numerical Simulation of Combustion and Emission in Medium-Duty Diesel Engine Fuelled with Biodiesel Blended Fisher-Tropsh Diesel

Modelling of laminar diffusion flames with biodiesel blends and soot formation

Numerical simulation of the combustion chamber and performance analysis of microalgae-based biodiesel/diesel-powered CI engine: An axisymmetric flow approach

Experimental and kinetic modeling study of extinction and ignition of methyl decanoate in laminar non-premixed flows

Computational Analysis on Combustion Control of Diesel Engines Fueled with Ester Alcohol Diesel

Investigating the Kinetics of Intramolecular H-Migration Reaction Class of Methyl-Ester Peroxide Radicals in Low-Temperature Oxidation Mechanisms of Biodiesel

Experimental and Numerical Study on the Effect of NO on -Butanol/Biodiesel Dual-Fuel Combustion in a Compression Ignition Engine.

Study on spray characteristics of biodiesel alternative fuels for in-cylinder environment of diesel engine

The effect of the unsaturation degree on the gas-phase autoignition of methyl oleate and methyl linoleate: Experimental and modeling study

Visualization Investigation of Soot Characteristics of Engine Fuelled with Biodiesel Fuel

3-D Simulation of Soot Formation in a Direct-Injection Diesel Engine Based on a Comprehensive Chemical Mechanism and Method of Moments

Experimental study and prediction model of combustion stability and combustion mode variation of burning methanol/biodiesel blends for diesel engines