Abstract:Ethylene oxide production process is one of the highest energy consumers in chemical industry, and therefore even a slight improvement in its overall efficiency can have a significant impact on the sustainability of the process. Efficiency improvement can be carried out using the exergy-aided pinch analysis outlined in this paper. The overall exergy loss distribution in different unit operations of an ethylene oxide process was first evaluated and mapped out in the form of “visualized exergetic process flowsheet”. An initial analysis of the four main functional blocks of the process showed that the exothermic reaction block contained the largest exergy loss (6043 and 428 kJ/kg of internal and external losses, respectively) which can be reduced by isothermal mixing, as well as increasing reaction temperature and reduction in pressure drop. The absorption block was also estimated to have the second highest contribution with total exergy losses of 3640 kJ/kg which were mainly due to the cooling column. These losses were then recommended to be reduced by improvements in the concentration and temperature gradients along the tower. Following the block-wise analysis, exergy analysis was then carried out for individual unit operations in each block to pinpoint the main sources of thermal exergetic inefficiency. Thermal solutions to reduce losses were also proposed in accordance with the identified sources of inefficiency, leading to a comprehensive list of cold and hot process streams that could be introduced to reduce losses. Finally, pinch analysis was brought into action to estimate the minimum energy requirements, to select utilities, and to design heat exchanger network. Thus, the methodology used in this work took advantage of both exergy and pinch analyses. The combined thermal-exergy-based pinch approach helped to set energy targets so that all the thermal possible solutions supported by exergy analysis were considered, preventing exclusion of any hot or cold process stream with high potential for heat integration during pinch analysis. Results indicated that the minimum cold utility requirement could be reduced from 601.64 MW (obtained via conventional pinch analysis) to 577.82 MW through screening of streams by the combined methodology.

Analysis on Energy Consumption for Alumina Production Basing on Exergy Intensity-Energy Intensity-Product Ratio Analysis Model.

Exergy analysis of iron and steel eco-industrial systems

Exergy Analysis of Two Typical Pure Terephthalic Acid Process

Thermodynamic Performance Analysis of Associated Energy Combined Cycle System in Ironmaking Process

Exergoeconomic Analysis of A Combined Cycle System Utilizing Associated Gases from Steel Production Process Based on Structural Theory of Thermoeconomics

Comparative study on associated energy combined cycle system schemes in ironmaking process

Energy modeling and efficiency analysis of aluminum die-casting processes

Energy balance analysis of no.1 sinter machine at baosteel

Optimization of High-Alumina Blast Furnace Slag Based on Exergy Analysis

Industrial Internet of Things Enabled Supply-Side Energy Modelling for Refined Energy Management in Aluminium Extrusions Manufacturing

Towards on Energy-Saving Separation of Ethylene Glycol Mixture from Production Plants Based on Energy, Exergy, Economic, Environmental, Exergoeconomic, and Exergoenvironmental Analyses

Comparative Analysis for Thermal Utilization Efficiency of Baosteel Sinter Machines

An assessment of environmental impacts and economic benefits of multiple aluminum production methods

An Internet of Things-enabled model-based approach to improving the energy efficiency of aluminum die casting processes

Cumulative exergy demand analysis of the primary aluminum produced in China and its natural resource-saving potential in transportation

Combined pinch and exergy analysis of an ethylene oxide production process to boost energy efficiency toward environmental sustainability

Energy Consumption of Super-High-rate Anaerobic Bioreactor

The effects of energy consumption of alumina production in the environmental impacts using life cycle assessment

Exergy-environment assessment for energy system: Distinguish the internal and total exergy loss, and modify the contribution of utility

Thermodynamics Analysis of Carbothermal-Chlorination Reduction in Aluminum Production

Theoretical Energy Consumption Analysis for Sustainable Practices in Iron and Steel Industry