Abstract:Low-power consumption has been always a crucial design constraint for an efficient intellectual property based three-dimensional multi-core system that cannot be ignored easily. As the complexity increases due to the number of cores/stacks/ layers in 3D digital systems, the challenges to handle power can be more difficult at a high abstraction level. Therefore, the low-power approach gives designers an opportunity to estimate and optimize the power consumption in the early stages of design phases. The accurate power estimation through the macro-modeling approach at high-level reduces the risk of redesign cycle and turn-around time. In this research, we have presented an improved statistical macro-modeling approach that estimates power through statistical characteristics of randomly generated input patterns by using Biogeography Based Optimization. These input patterns propagate signals into an IP-based 3D digital test system. In experiments, the test system is based on four 8 to 32- bits heterogeneous cores. The response of the power is monitored by applying the well-known Monte Carlo Simulation technique. The entire power estimation method is performed in two major steps. First, the average power is estimated for an IP-based individual core. Second, the average power for bus-based Through-Silicon-Via is estimated. Finally, the cores and B-TSVs are integrated together to construct a 3D system. Then the average power for complete test systems is estimated. The experimental results of the statistical power macro-model are compared with the commercial Electronic Design Automation power simulator at the operating frequency of 100 MHz. The average percentage error of the test system is calculated as 8.65%. For the validation of these results, the statistical error analysis is additionally performed and reveals that our proposed macro-model is accurate in terms of percentage of error with a feasible amount of time.

An Embedded Software Fusion Power Model Based on Algorithm and Micro-architectural Level

Power Profiling for Low Power Optimization Using New Computing Model

A novel cross-layer framework for early-stage power delivery and architecture co-exploration.

A Silicon-Validated Methodology for Power Delivery Modeling and Simulation

An accelerator-aware microarchitecture simulator for design space exploration

A functionality based instruction level software power estimation model for embedded RISC processors

FirePower: Towards a Foundation with Generalizable Knowledge for Architecture-Level Power Modeling

PMCC: Fast and Accurate System-Level Power Modeling for Processors on Heterogeneous SoC

Cross Architectural Power Modelling

Study on System-Level Power Model for Low Power Optimization

Study on Methodology of Algorithm Analysis for Energy

An Instruction-Level Analytical Power Model for Designing the Low Power Systems on a Chip

Power modeling and characteristics of field programmable gate arrays

An Instruction-Level Analytical Power Model For Designing The Low Power Soc

An empirical comparison of algorithmic, instruction, and architectural power prediction models for high performance embedded DSP processors

Accurate CPU Power Modeling for Multicore Smartphones

An Ultra-Low-Power Embedded Processor with Variable Micro-Architecture

Enabling Accurate and Efficient Modeling-Based CPU Power Estimation for Smartphones

FuMicro: A Fused Microarchitecture Design Integrating In-Order Superscalar and VLIW

McPAT-Calib - A Microarchitecture Power Modeling Framework for Modern CPUs.

Efficient power macromodeling approach for heterogeneously stacked 3d ICs using Bio-geography based optimization