Abstract:Topology optimization of fluid flow problems is still a challenging open problem, especially when considering turbulence, compressibility, or the addition of different physics. In the current implementation of topology optimization for fluids considering density methods, there are essentially three problems. First, the grayscale in the result makes it difficult to identify the precise contour of the fluid region, which may be a problem in some applications and during the optimization process as well. Second, even for low Reynolds flow design problems, a continuation scheme of the material model penalization parameters is necessary to avoid a grayscale and to obtain a clear boundary. Third, in complex fluid flow optimization problems, it is difficult to specify the maximum value of the inverse permeability to avoid the fluid to flow inside the solid. This work proposes a novel methodology that tackles the first two problems, i.e., it avoids the grayscale and obtains clear boundaries. The goal of this work is to implement the Topology Optimization of Binary Structures (TOBS) (Sivapuram and Picelli, <i>Finite Elem Anal Des</i> 139:49–61, <a href="/article/10.1007/s00158-021-02910-6#ref-CR22">2018</a>) for fluid flow design, which is a novel topology optimization method that has been used in solid mechanics to generate optimized structural solutions considering only binary {0,1} design variables. The main advantage of {0,1} methods is the clear definition of the interface and the absence of grayscale. It is a method easy to implement which preserves the material distribution features. Some classic fluid problems are considered to illustrate the problem, such as the double channel and the bend pipe, and also a more complex example that usually presents grayscale issues, which is the fluid diode design. The optimization results show the feasibility of the TOBS when applied to fluid flow problems. The physical problem is solved by using the finite element method and the optimization problem with CPLEX<sup>Ⓒ</sup>, a proprietary optimization package from IBM. The present work successfully eliminates the grayscale problem, bringing clear boundaries in the interface fluid-solid.

Topology Optimization of Fluid Channels with Flow Rate Equality Constraints

Design of Microfluidic Channel Networks with Specified Output Flow Rates Using the CFD-based Optimization Method

Topology Optimization of Channel Cooling Structures Considering Thermomechanical Behavior

Topology Optimization Design and Heat Transfer Performance of Cooling Channel Based on Fluid-Solid Coupling

Topology optimization of surface flows

Topology Optimization of Multi-Component Flows Using a Multi-Relaxation Time Lattice Boltzmann Method

Topology Optimization of Fluidic Problems Using Internal Interface Normal Zero-Velocity Constraint

A Hybrid Optimization Method to Design Shapes of Three-Dimensional Flow Channels

Topology optimization of fluid flow by using Integer Linear Programming

Topology Optimization of Continuum Structures for the Uniformity of Contact Pressures

Fluidic Topology Optimization with an Anisotropic Mixture Model

Topology Optimization of the Channel Structure in Microfluidic Chips

Topology Optimization of Turbulent Flow Cooling Structures Based on the k-ε Model

Topology Optimization of Planar Cooling Channels Using a Three-Layer Thermofluid Model in Fully Developed Laminar Flow Problems

Topology Optimization of Two Fluid Heat Transfer Problems for Heat Exchanger Design

Topology optimization of fluidic flows on 2-manifolds

Net-based topology optimization approach for cooling channels

A Mini Review on Fluid Topology Optimization

Topology optimization of steady Navier-Stokes flow via a piecewise constant level set method

Optimal design for non-Newtonian flows using a topology optimization approach

Topological Optimization of Axisymmetrical Bodies on Water Entries