Abstract:Topology optimization of fluid flow problems is still a challenging open problem, especially when considering turbulence, compressibility, or the addition of different physics. In the current implementation of topology optimization for fluids considering density methods, there are essentially three problems. First, the grayscale in the result makes it difficult to identify the precise contour of the fluid region, which may be a problem in some applications and during the optimization process as well. Second, even for low Reynolds flow design problems, a continuation scheme of the material model penalization parameters is necessary to avoid a grayscale and to obtain a clear boundary. Third, in complex fluid flow optimization problems, it is difficult to specify the maximum value of the inverse permeability to avoid the fluid to flow inside the solid. This work proposes a novel methodology that tackles the first two problems, i.e., it avoids the grayscale and obtains clear boundaries. The goal of this work is to implement the Topology Optimization of Binary Structures (TOBS) (Sivapuram and Picelli, <i>Finite Elem Anal Des</i> 139:49–61, <a href="/article/10.1007/s00158-021-02910-6#ref-CR22">2018</a>) for fluid flow design, which is a novel topology optimization method that has been used in solid mechanics to generate optimized structural solutions considering only binary {0,1} design variables. The main advantage of {0,1} methods is the clear definition of the interface and the absence of grayscale. It is a method easy to implement which preserves the material distribution features. Some classic fluid problems are considered to illustrate the problem, such as the double channel and the bend pipe, and also a more complex example that usually presents grayscale issues, which is the fluid diode design. The optimization results show the feasibility of the TOBS when applied to fluid flow problems. The physical problem is solved by using the finite element method and the optimization problem with CPLEX<sup>Ⓒ</sup>, a proprietary optimization package from IBM. The present work successfully eliminates the grayscale problem, bringing clear boundaries in the interface fluid-solid.

Optimal design for non-Newtonian flows using a topology optimization approach

Effect of viscous shearing stresses on optimal material designs for flow of fluids through porous media

Topology optimization of surface flows

A Computational Strategy for Nonlinear Coupled Constitutive Relations of Rarefied Nonequilibrium Flows on Unstructured Grids

Topology optimization of fluidic flows on 2-manifolds

Revisiting density-based topology optimization for fluid-structure-interaction problems

Design of Microfluidic Channel Networks with Specified Output Flow Rates Using the CFD-based Optimization Method

Topology optimization of fluidic pressure-loaded structures and compliant mechanisms using the Darcy method

Topology optimization of steady Navier-Stokes flow via a piecewise constant level set method

Efficient topology optimization for geometrically nonlinear multi-material systems under design-dependent pressure loading

A "poor man's" approach for high-resolution three-dimensional topology optimization of natural convection problems

Fluidic Topology Optimization with an Anisotropic Mixture Model

Topology optimization for turbulent flow with Spalart–Allmaras model

On the virtual element method for topology optimization of non-Newtonian fluid-flow problems

A topology optimization approach applied to laminar flow machine rotor design

Density-Based Topology Optimization of High-Fidelity Fluid-Structure Interaction Problems with Large Deformations

Topology optimization of incompressible structures subject to fluid–structure interaction

Topology Optimization on Two-Dimensional Manifolds

Topology optimization for stationary fluid–structure interaction problems with turbulent flow via sequential integer linear programming and smooth explicit boundaries

Topology optimization of fluid flow by using Integer Linear Programming

Non-Newtonian and poroelastic effects in simulations of arterial flows