Research on Machine Tool Spatial Dynamic Characteristics Based on Response Surface Method
Congying DENG,Yun LIU,Guofu YIN,Ling WANG,Lijun LIN
DOI: https://doi.org/10.15961/j.jsuese.201601150
2017-01-01
Abstract:Position changes of the machine tool's moving parts result in changes of the machine tool's mass matrix,stiffness matrix and damp matrix,which leads to the complexity and uncertainty for predicating the dynamic characteristics of the whole machine tool.Thus,a method to research machine tool's dynamic characteristics in the generalized machining space was proposed based on the response surface theory.In this method,the natural frequency was taken as the critical index to describe the whole machine tool dynamic characteristics,with which the mathematic relationship between dynamic characteristics and spatial poses were analyzed.Then,the orthogonal experiment design and the response surface method (RSM) were combined to establish the response surface model for predicating the varying dynamic characteristics,and their variation regularities in machining space were discussed.Furthermore,an algorithm was put forward to calculate the effect factors,which represented how the changes of each axial displacement impact on the dynamic characteristics of the whole machine tool.With the obtained variation regularities and effect factors,the optimal machining region and machining route were determined.The proposed method was applied in a three-axis vertical machining center to verify its feasibility.The various pose combinations of the moving parts were arranged as the samples by the orthogonal experiment design,and the natural frequencies related to the first five orders were acquired by conducting the modal analyses with the ANSYS software.Utilizing theacquired dynamic data,a second-order polynomial response surface model was established to describe the connections between the pose features and the natural frequencies.And the accuracy of the established model was validated after calculating the valuating indexes.Accordingly,this model was adopted to achieve the yariation regularities and effect factors of the natural frequencies due to the displacement changes ofx,y,z directions,which explained that the spatial poses affected the dynamic characteristics of the whole machine tool significantly,providing a theoretical support for the process planning and dynamic optimization of the machine tool.