Abstract:The performance influence on the dual fuel engine by the intake/exhaust port flow coefficient and swirl are major factors to the dual fuel engine. Therefor the optimization of the intake and the exhaust ports was carried out to ensure the adaptability of the airway structure to the ACD320 dual fuel engine in this paper. According to the limitation conditions of the structural parameters, the multiple airways crossing the diameter of the intake/exhaust port were designed. The research on variation rules of flow and swirl characteristics in different intake/exhaust port circulation cross-sectional area by aerodynamics modeling and simulating approach to optimizing the matching degree between the cylinder and the intake/exhaust port of a marine dual fuel engine was presented. And the optimizing match results were verified and analyzed by the experimental results of the practical intake and exhaust port models. The influence on the performance by the intake/exhaust air flow area and the valve lift is analyzed comprehensively by the AVL test results of the intake and the exhaust ports. The suction and combustion processes at different size of intake and exhaust port are simulated by AVL Fire to validate the optimum matching. Results show that the intake flow coefficient tends to be stable when the diameter of the intake port greater than 83 mm, the swirl number tends to be stable when the diameter of the intake port greater than 88 mm and the exhaust flow coefficient tends to be stable when the diameter of the exhaust port greater than 80 mm. Analysis show that the mean flow coefficient present optimum consequence when the diameter of the intake port is 88.6 mm. By analyzing and comparing intake airflow, efficiency, emissions and indicate power, the fifth group (intake port 88.60 mm, exhaust port 80.00 mm) matching is the optimum matching for ACD320 type marine dual fuel engine. The results provide reference for the design and optimization of dual fuel engine.

Study on Three-Dimensional Flow Characteristics on the Port of an Engine.

Three-dimensional Simulation and Optimization of Engine Intake Ports

Numerical simulation of 3-D turbulent flows in a cut-off valve and analysis of flow characteristics in pipe

Three-Dimensional Simulation for Helical Intake Port of 4BTAA Diesel Engine

Research on Performance Matching of Intake and Exhaust Ports of Marine Medium Speed Dual Fuel Engine

Influence of Inlet and Outlet Area Ratio on Intake Port Flow Capacity

Research on Flowability in Intake Port of Turbocharged Diesel Engine at High Port Pressure Drop

Influence of Intake-port Layout on Air Flow around Intake-valve of a Two-valve Diesel Engine

An Experimental Study on Intake-ports Characteristics of a Four-valve Diesel Engine

Numerical computed methods for intake manifolds in gasoline engine

Effects of different parameters on the flow field of peripheral ported rotary engines

Research on the Intake Port of a Uniflow Scavenging GDI Opposed-Piston Two-Stroke Engine

Three-Dimensional Computational Fluid Dynamics Modeling of a 6V150 Diesel Engine

Optimization of Gasoline Engine Intake System Based on 1D, 3D and Coupled Simulations

The formation mechanisms of flow field in a compound intake ported rotary engine considering apex seal leakage

The full-parametric development of the intake ports by using genetic algorithm in a four-valve diesel engine

The Influence of the Intake Geometry on the Performance of a Four-Stroke SI Engine for Aeronautical Applications

Computation and Validation of In-Cylinder Flow Field, Swirl and Flow Coefficients for a Naturally Aspirated Single Cylinder Diesel Engine

The effect of intake port shape on in-cylinder flow field and turbulence distribution in a high-tumble production engine with endoscope accesses

Numerical study of an internal combustion engine intake process using a low Mach number preconditioned density-based method with experimental comparison

Parametric modeling and analysis of intake phases for side-ported Wankel rotary engines