Abstract:In order to predict flow behavior and find the optimum hot working processing parameters for 5754 aluminum alloy, the experimental flow stress data obtained from the isothermal hot compression tests on a Gleeble-3500 thermo-simulation apparatus, with different strain rates (0.1⁻10 s⁻1) and temperatures (300⁻500 &deg;C), were used to construct the constitutive models of the strain-compensation Arrhenius (SA) and back propagation (BP) artificial neural network (ANN). In addition, an optimized BP⁻ANN model based on the genetic algorithm (GA) was established. Furthermore, the predictability of the three models was evaluated by the statistical indicators, including the correlation coefficient (R) and average absolute relative error (AARE). The results showed that the R of the SA model, BP⁻ANN model, and ANN⁻GA model were 0.9918, 0.9929, and 0.9999, respectively, while the AARE of these models was found to be 3.2499⁻5.6774%, 0.0567⁻5.4436% and 0.0232⁻1.0485%, respectively. The prediction error of the SA model was high at 400 &deg;C. It was more accurate to use the BP⁻ANN model to determine the flow behavior compared to the SA model. However, the BP⁻ANN model had more instability at 300 &deg;C and a true strain in the range of 0.4⁻0.6. When compared with the SA model and BP⁻ANN model, the ANN⁻GA model had a more efficient and more accurate prediction ability during the whole deformation process. Furthermore, the dynamic softening characteristic was analyzed by the flow curves. All curves showed that 5754 aluminum alloy showed the typical rheological characteristics. The flow stress rose rapidly with increasing strain until it reached a peak. After this, the flow stress remained constant, which demonstrates a steady flow softening phenomenon. Besides, the flow stress and the required variables to reach the steady state deformation increased with increasing strain rate and decreasing temperature.

Evaluation of tube formability in hydroforming by artificial neural network

Heuristic Evaluation for Progressive Additive Manufacturing of Industrial Bending Tubes Based on Reconfigurable Transfer Learning

Prediction of NC tube bending process parameters based on artificial neural network

Artificial Neural Networks (ANN) Based Compressive Strength Prediction of AFRP Strengthened Steel Tube

A new method based on back propagation neural network for identifying the material parameters of tube

Modelling of the Hot Flow Behaviors for Ti-13Nb-13Zr Alloy by BP-ANN Model and Its Application

Prediction of wrinkling in thin-walled tube push-bending process using artificial neural network and finite element method

Bending deformation prediction in a welded square thin-walled aluminum alloy tube structure using an artificial neural network

Prediction of the hot deformation behavior for Aermet100 steel using an artificial neural network

FEM Analysis of Tube Preforming and Hydroforming Process for an Automotive Part

Simulation of an Automobile T-tube Hydroforming

Modeling Constitutive Relationship of Ti40 Alloy Using Artificial Neural Network

Prediction of the mechanical behavior of steel-aluminum flow drill screw joints using artificial neural network

Artificial neural network modeling of mechanical properties of armor steel under complex loading conditions

Prediction of flow stress of BT20 titanium alloy by BP neural network

Research on the Neural Networks Used for Shaping Tubes by the Liquid Extrusion Process

Construction of aluminum alloy constitutive model based on BP neural network and the study of non-isothermal hydroforming

More Accurate Determination of Constitutive Parameters of Sheet Metals Using Artificial Neural Network

A Modified Back Propagation Artificial Neural Network Model Based on Genetic Algorithm to Predict the Flow Behavior of 5754 Aluminum Alloy

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Analog-Circuit Model of FGH96 Superalloy Hot Deformation Behaviors Based on Artificial Neural Network