Abstract:Damping force-velocity hysteresis of a magnetorheological (MR) damper under sinusoidal displacement excitation is not only a typical indication of its dynamic performance, but also the foundation upon which a practical control strategy is established. Although numerous parametric and non-parametric models are effectively in predicting the hysteresis, their accuracy strongly depends on specific experimental data. Furthermore, little design guiding information can be explored from these models. With compressibility of MR fluid considered, ordinary differential equations (ODEs) of a physical MR damper model is derived in this paper, and comparison between model results and experimental data of a literature shows good agreements. Then a corresponding lumped parameter model is developed, that is, a quasi-static MR model connected in series with a spring expressing compression of MR fluid. Moreover, the spring stiff expression is found to be equivalent to the "oil spring" in hydraulic technology. Decomposing a quasi-static MR model further to a friction element and a parallel-connected viscous element, these two basic elements in combination with a spring together fundamentally constitute a dynamic MR damper model. Consequently, for the first time (to authors' knowledge), a clear developing process of the hysteresis is presented with these three basic elements. As another main contribution of this paper, expression for calculating hysteresis width is derived by neglecting viscous element, and dynamic design method of MR dampers is proposed. Results show that a MR damper should be designed as short stroke and large effective area for the purpose of reducing the hysteresis.

Generation and Modeling of Asymmetric Hysteresis Damping Characteristics for a Symmetric Magnetorheological Damper

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Modeling the Loading-Rate Dependency of the Hysteretic Dynamics of Magnetorheological Dampers

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Modelling Hysteretic Behaviour in Magnetorheological Fluids and Dampers Using Phase-Transition Theory

An investigation on the field strength and loading rate dependences of the hysteretic dynamics of magnetorheological dampers

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Dynamic Models for Magnetorheological Dampers and Its Feedback Linearization

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Modeling of Passive Adaptive MR Damper

Experimental Analysis and Mathematical Modelling for Novel Magnetorheological Damper Design

A mechanism-based magic formula model for hysteretic characteristics of magneto rheological damper

Design of a Novel Magnetorheological Damper with Large Damping Force and Its Nonlinear Modeling at High Velocity

EXPERIMENT AND MODELING RESEARCH ON HYSTERETIC LOOP OF MAGNETORHEOLOGICAL DAMPER

An invertible hysteresis model for magnetorheological damper with improved adaption capability in frequency and amplitude

Hysteresis Behavior Computation And Dynamic Design Of Magnetorheological Dampers Under Sinusoidal Displacement Excitation

Modeling and Analyzing of Hysteresis Behavior of Magneto Rheological Dampers

Theoretical switch model of novel asymmetric magnetorheological damper for shock and vibration application

Design, theoretical modeling, and experimental analysis of a magnetorheological damper with radial damping gap

Design and Modeling of a Novel Double-Piston Magnetorheological Damper