Abstract:Damping force-velocity hysteresis of a magnetorheological (MR) damper under sinusoidal displacement excitation is not only a typical indication of its dynamic performance, but also the foundation upon which a practical control strategy is established. Although numerous parametric and non-parametric models are effectively in predicting the hysteresis, their accuracy strongly depends on specific experimental data. Furthermore, little design guiding information can be explored from these models. With compressibility of MR fluid considered, ordinary differential equations (ODEs) of a physical MR damper model is derived in this paper, and comparison between model results and experimental data of a literature shows good agreements. Then a corresponding lumped parameter model is developed, that is, a quasi-static MR model connected in series with a spring expressing compression of MR fluid. Moreover, the spring stiff expression is found to be equivalent to the "oil spring" in hydraulic technology. Decomposing a quasi-static MR model further to a friction element and a parallel-connected viscous element, these two basic elements in combination with a spring together fundamentally constitute a dynamic MR damper model. Consequently, for the first time (to authors' knowledge), a clear developing process of the hysteresis is presented with these three basic elements. As another main contribution of this paper, expression for calculating hysteresis width is derived by neglecting viscous element, and dynamic design method of MR dampers is proposed. Results show that a MR damper should be designed as short stroke and large effective area for the purpose of reducing the hysteresis.

Design of a Novel Magnetorheological Damper with Large Damping Force and Its Nonlinear Modeling at High Velocity

Experimental Investigations on the Nonlinear Dynamics of Magnetorheological Dampers

Modelling Hysteretic Behaviour in Magnetorheological Fluids and Dampers Using Phase-Transition Theory

Simulation on Hysteresis Characteristic of Squeeze Mode Magneto-Rheological Damper Based on Non-Convex Constitutive Relation

Modeling the Loading-Rate Dependency of the Hysteretic Dynamics of Magnetorheological Dampers

Dynamic Models for Magnetorheological Dampers and Its Feedback Linearization

Dynamic Characteristics and Modeling of A New Magnetorheological Damper for Broadband Vibration Control

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Design and modeling of a magnetorheological damper with double annular damping gap

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Design, theoretical modeling, and experimental analysis of a magnetorheological damper with radial damping gap

Experimental Analysis and Mathematical Modelling for Novel Magnetorheological Damper Design

Design of a New Damper Based on Magnetorheological Fluids

Design and Modeling of a Novel Double-Piston Magnetorheological Damper

Development and characterization of a magnetorheological damper with low-velocity sensitivity

A Disc-Type Magneto-Rheologtic Fluid Damper

Dynamic Modeling of Large-Scale Magnetorheological Damper Systems for Civil Engineering Applications

Physical Modeling and Design Method of the Hysteretic Behavior of Magnetorheological Dampers

Design and Damping Performance Analysis of a Multistage Meandering Hybrid Valved Magnetorheological Damper

Hysteresis Behavior Computation And Dynamic Design Of Magnetorheological Dampers Under Sinusoidal Displacement Excitation

Study on Damping Properties of Magnetorheological Damper