Abstract:A facile and sustainable emulsion method is proposed for the preparation of CNT/PDMS‐S strain sensor with a segregated structure. The formation of a segregated structure greatly lowers the percolation threshold. Flexible strain sensors have been widely used in many fields because of their excellent adaptability and flexibility. Nonetheless, creating these sensors through simple methods that achieve a low percolation threshold and high sensitivity continues to pose a challenge. In this paper, a segregated structure was realized in a carbon nanotube/polydimethylsiloxane (CNT/PDMS‐S) strain sensor by a sustainable emulsion method that involved the mixing cellulose nanocrystals (CNCs), CNTs, PDMS and water. The incorporation of CNC improved the stability of CNTs in aqueous suspension. Consequently, The CNT@CNC nanocomposites were strategically placed in the gaps between the PDMS microspheres, creating a segregated structure. The segregated structure notably lowered the percolation threshold of the composite to 0.49 wt%. Moreover, we found that the CNT/PDMS‐S sensor containing 1.5 wt% CNTs showed excellent sensing performance, which not only had a wide strain measurement range and could adapt to the strain change from 0% to 70%, but also had high sensitivity with a gauge factor (GF) of 290 at 70% strain. Meanwhile, the sensor had an excellent linear response (R2 ≥ 0.96) and can monitor the minimum strain of 0.1%. The proposed sensor demonstrated excellent response when applied to sense wrist movement, facial movement and closure, and syllable recognition. Highlights Strain sensors with a segregated structure were realized by a sustainable method. The segregated structure greatly reduces the percolation threshold of sensor. The sensor has a high sensitivity, linearity, and wide strain detection range. The sensor features high resolution for tiny deformations sensing.

Controllable fabrication of carbon nanotube-polymer hybrid thin film for strain sensing

Development Of Flexible Carbon Nanotube-Polymer Hybrid Thin Film For Strain Sensing

Enhanced performance of 3D printed highly elastic strain sensors of carbon nanotube/thermoplastic polyurethane nanocomposites via non-covalent interactions

Thin and high conductive multi‐walled carbon nanotubes/polydimethylsiloxane composite film prepared via solvent method as strain sensors

Sensitivity-Tunable Strain Sensors Based on Carbon Nanotube@Carbon Nanocoil Hybrid Networks.

Flexible and Transparent Strain Sensors with Embedded Multiwalled Carbon Nanotubes Meshes.

Flexible and transparent strain sensors based on super-aligned carbon nanotube films.

Ultrathin CNTs Film Based on Marangoni Effect for Strain Sensing Application

Highly Flexible Strain Sensors Based on Polydimethylsiloxane/carbon Nanotubes (cnts) Prepared by a Swelling/permeating Method and Enhanced Sensitivity by CNTs Surface Modification

Flexible strain sensors based on carbon nanotubes/polydimethylsiloxane composites with a segregated structure prepared by sustainable emulsion method

Structural and Dimensional Engineering of Three-Dimensional Carbon Nanotube/polydimethylsiloxane Composite for Stretchable Sensor

A Porous Carbon Nanotube/polydimethylsiloxane Strain Sensor with Low Strain Monitoring Limit Prepared by Sustainable Emulsion Method

Reinforced standing multi-walled carbon nanotube film for stretchable strain sensor

Fabrication of electrically conductive poly(styrene-b-ethylene-ran-butylene-b-styrene)/multi-walled carbon nanotubes composite fiber and its application in ultra-stretchable strain sensor

Superior Piezoresistive Strain Sensing Behaviors of Carbon Nanotubes in One-Dimensional Polymer Fiber Structure

2D End-to-end Carbon Nanotube Conductive Networks in Polymer Nanocomposites: a Conceptual Design to Dramatically Enhance the Sensitivities of Strain Sensors.

Carbon Nanotube Coated Fibrous Tubes for Highly Stretchable Strain Sensors Having High Linearity

3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites

Highly Sensitive, Ultrastretchable Strain Sensors Prepared by Pumping Hybrid Fillers of Carbon Nanotubes/Cellulose Nanocrystal into Electrospun Polyurethane Membranes.

Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Motion and Tactile Recognition

Cost-Effective Fabrication of Transparent Strain Sensors via Micro-Scale 3D Printing and Imprinting