Abstract:A facile and sustainable emulsion method is proposed for the preparation of CNT/PDMS‐S strain sensor with a segregated structure. The formation of a segregated structure greatly lowers the percolation threshold. Flexible strain sensors have been widely used in many fields because of their excellent adaptability and flexibility. Nonetheless, creating these sensors through simple methods that achieve a low percolation threshold and high sensitivity continues to pose a challenge. In this paper, a segregated structure was realized in a carbon nanotube/polydimethylsiloxane (CNT/PDMS‐S) strain sensor by a sustainable emulsion method that involved the mixing cellulose nanocrystals (CNCs), CNTs, PDMS and water. The incorporation of CNC improved the stability of CNTs in aqueous suspension. Consequently, The CNT@CNC nanocomposites were strategically placed in the gaps between the PDMS microspheres, creating a segregated structure. The segregated structure notably lowered the percolation threshold of the composite to 0.49 wt%. Moreover, we found that the CNT/PDMS‐S sensor containing 1.5 wt% CNTs showed excellent sensing performance, which not only had a wide strain measurement range and could adapt to the strain change from 0% to 70%, but also had high sensitivity with a gauge factor (GF) of 290 at 70% strain. Meanwhile, the sensor had an excellent linear response (R2 ≥ 0.96) and can monitor the minimum strain of 0.1%. The proposed sensor demonstrated excellent response when applied to sense wrist movement, facial movement and closure, and syllable recognition. Highlights Strain sensors with a segregated structure were realized by a sustainable method. The segregated structure greatly reduces the percolation threshold of sensor. The sensor has a high sensitivity, linearity, and wide strain detection range. The sensor features high resolution for tiny deformations sensing.

Flexible strain sensors based on carbon nanotubes/polydimethylsiloxane composites with a segregated structure prepared by sustainable emulsion method

A Porous Carbon Nanotube/polydimethylsiloxane Strain Sensor with Low Strain Monitoring Limit Prepared by Sustainable Emulsion Method

A Flexible Strain Sensor of Porous Conductive Silicone Rubber Composites Prepared from High Internal Phase Emulsion

Flexible and Transparent Strain Sensors with Embedded Multiwalled Carbon Nanotubes Meshes.

Highly Flexible Strain Sensors Based on Polydimethylsiloxane/carbon Nanotubes (cnts) Prepared by a Swelling/permeating Method and Enhanced Sensitivity by CNTs Surface Modification

Flexible and transparent strain sensors with embedded multiwalled carbon nanotubes meshes

Flexible strain sensors with high sensitivity and large monitoring range prepared by biaxially stretching conductive polymer composites with a bilayer structure

Highly Stretchable, Sensitive and Wide Linear Responsive Fabric-Based Strain Sensors with a Self-Segregated Carbon Nanotube (cnt)/polydimethylsiloxane (PDMS) Coating

Wearable Strain Sensors Based on a Porous Polydimethylsiloxane Hybrid with Carbon Nanotubes and Graphene

Preparation and Performance of Biaxially Stretched CNT-SBS/POE Flexible Strain Sensor with a Double Percolation Structure

Tailoring Sensing Behavior of Cu@multi-wall Carbon Nanotubes/polydimethylsiloxane Strain Sensors Through Surface Cu Geometrical Structures

Structural and Dimensional Engineering of Three-Dimensional Carbon Nanotube/polydimethylsiloxane Composite for Stretchable Sensor

Flexible and transparent strain sensors based on super-aligned carbon nanotube films.

High-performance Fiber Strain Sensor of Carbon Nanotube/thermoplastic Polyurethane@styrene Butadiene Styrene with a Double Percolated Structure

Fully Flexible Strain Sensor from Core-Spun Elastic Threads with Integrated Electrode and Sensing Cell Based on Conductive Nanocomposite

Highly Stretchable and Sensitive Strain Sensor with Porous Segregated Conductive Network.

Highly Sensitive Strain Sensors Based on Fragmentized Carbon Nanotube/polydimethylsiloxane Composites

Tunable Large‐Scale Compressive Strain Sensor Based on Carbon Nanotube/Polydimethylsiloxane Foam Composites by Additive Manufacturing

Biomimetic metal–organic framework-derived porous carbon welded carbon nanotube networks for strain sensors with high sensitivity and wide sensing range

Highly Sensitive Flexible Strain Sensor Based on a Double-percolation Structured Elastic Fiber of Carbon Nanotube (CNT)/Styrene Butadiene Styrene (SBS) @ Thermoplastic Polyurethane (TPU) for Human Motion and Tactile Recognition

A stretchable and transparent strain sensor based on sandwich-like PDMS/CNTs/PDMS composite containing an ultrathin conductive CNT layer