Abstract:In order to limit the ever-increasing consumption of new resources for material formulations, regulations and legislation require us to move from a linear to a circular economy and to find efficient ways to recycle, reuse and recover materials. Taking into account the principles of material circularity and waste reuse, this research study aims to produce thermoplastic composites using two types of industrial waste from neighbouring companies, namely waste polypropylene (wPP) from household production and carbon-fibre-reinforced epoxy composite scrap from a pultrusion company. The industrial scrap of the carbon-fibre-reinforced epoxy composites was either machined/ground to powder (pCFRC) and used directly as a reinforcement agent or subjected to a chemical digestion process to recover the carbon fibres (rCFs). Both pCFRC and rCF, at different weight ratios, were melt-blended with wPP. Prior to melt blending, both pCFRC and rCF were analysed for morphology by scanning electron microscopy (SEM). The pCFRC powder contains epoxy resin fragments with spherical to ellipsoidal shape and carbon fibre fragments. The rCFs are clean from the matrix, but they are slightly thicker and corrugated after the matrix digestion. Further, the morphologies of wPP/pCFRC and wPP/rCF were also investigated by SEM, while the thermal behaviour, i.e., transitions and changes in crystallinity, and thermal resistance were evaluated by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. The strength of the interaction between the filler (i.e., pCFRC or rCF) and the wPP matrix and the processability of these composites were assessed by rheological studies. Finally, the mechanical properties of the systems were characterised by tensile tests, and as found, both pCFRC and rCF exert reinforcement effects, although better results were obtained using rCF. The wPP/pCFRC results are more heterogeneous than those of the wPP/rCF due to the presence of epoxy and carbon fibre fragments, and this heterogeneity could be considered responsible for the mechanical behaviour. Further, the presence of both pCFRC and rCF leads to a restriction of polymer chain mobility, which leads to an overall reduction in ductility. All the results obtained suggest that both pCFRC and rCF are good candidates as reinforcing fillers for wPP and that these complex systems could potentially be processed by injection or compression moulding.

A method to reuse fiber-reinforced waste from e-waste as filler for polymeric composite

The Recycling of Comminuted Glass-Fiber-Reinforced Resin from Electronic Waste

Sustainable Composites from Waste Polypropylene Added with Thermoset Composite Waste or Recovered Carbon Fibres

A viable strategy to recycle post-used carbon fiber thermoset composites as a multi-functional filler for PP composites

The Reinforcing Effect of Waste Polyester Fiber on Recycled Polyethylene

Epoxy composite dust reinforced novel polypropylene composites: An eco‐friendly approach toward sustainable resource management

Characteristics of paper mill sludge-wood fiber-high-density polyethylene composites

The Reuse of Nonmetals Recycled from Waste Printed Circuit Boards As Reinforcing Fillers in the Polypropylene Composites

Mechanical enhancement of natural-fiber-reinforced composites modified with recycled thermoset composite fillers

Preparation of Waste PP/Fly Ash/Waste Stone Powder Composites and Evaluation of Their Mechanical Properties

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

The Reinforcing Effect of Waste Corrugated Paper Fiber on Polylactic Acid

Synergistic reinforcing effect of fly ash and powdered wood chips on the properties of polypropylene hybrid composites

Reusing Bisphenol—A Type of Epoxy Polymer Recyclates from the Solvolysis of CFRP

Recycling of waste wind turbine blades for high‐performance polypropylene composites

High-value utilization method of digital printing waste paper fibers-Co-blending filled HDPE composites and performance improvement

Analysis of Selected Properties of Polymer Mixtures Derived from Virgin and Re-Granulated PP with Glass Fibers

Upcycling Post-Consumer Paint Pail Plastic Waste

Novel Thermoplastic Composites Strengthened with Carbon Fiber-Reinforced Epoxy Composite Waste Rods: Development and Characterization

Highly Filled Waste Polyester Fiber/Low-Density Polyethylene Composites with a Better Fiber Length Retention Fabricated by a Two-Rotor Continuous Mixer

Study on recycled carbon fiber obtained by thermal activated oxide semiconductor and mechanical properties of its reinforced polymer composites