Abstract:Background: Robotics is emerging as a promising tool for functional training of human movement. Much of the research in this area over the last decade has focused on upper extremity orthotic devices. Some recent commercial designs proposed for the lower extremity are powered and expensive - hence, these could have limited affordability by most clinics. In this paper, we present a novel un-motorized bilateral exoskeleton that can be used to assist in treadmill training of motor-impaired patients, such as with motor-incomplete spinal cord injury. The exoskeleton is designed such that the human leg will have a desirable swing motion, once it is strapped to the exoskeleton. Since this exoskeleton is un-motorized, it can potentially be produced cheaply and could reduce the physical demand on therapists during treadmill training. Results: A swing-assist bilateral exoskeleton was designed and fabricated at the University of Delaware having the following salient features: (i) The design uses torsional springs at the hip and the knee joints to assist the swing motion. The springs get charged by the treadmill during stance phase of the leg and provide propulsion forces to the leg during swing. (ii) The design of the exoskeleton uses simple dynamic models of sagittal plane walking, which are used to optimize the parameters of the springs so that the foot can clear the ground and have a desirable forward motion during walking. The bilateral exoskeleton was tested on a healthy subject during treadmill walking for a range of walking speeds between 1.0 mph and 4.0 mph. Joint encoders and interface force-torque sensors mounted on the exoskeleton were used to evaluate the effectiveness of the exoskeleton in terms of the hip and knee joint torques applied by the human during treadmill walking. Conclusion: We compared two different cases. In case 1, we estimated the torque applied by the human joints when walking with the device using the joint kinematic data and interface force-torque sensors. In case 2, we calculated the required torque to perform a similar gait only using the kinematic data collected from joint motion sensors. On analysis, we found that at 2.0 mph, the device was effective in reducing the maximum hip torque requirement and the knee joint torque during the beginning of the swing. These behaviors were retained as the treadmill speed was changed between 1-4 mph. These results were remarkable considering the simplicity of the dynamic model, model uncertainty, non-ideal spring behavior, and friction in the joints. We believe that the results can be further improved in the future. Nevertheless, this promises to provide a useful and effective methodology for design of un-motorized exoskeletons to assist and train swing of motor-impaired patients.

A Novel DGO Based on Pneumatic Exoskeleton Leg for Locomotor Training of Paraplegic Patients

Online Gait Planning of Lower-Limb Exoskeleton Robot for Paraplegic Rehabilitation Considering Weight Transfer Process

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Gait training algorithm based on inverse dynamics of walking rehabilitation robot, DDgo Pro

Design and Control of a Flexible Exoskeleton to Generate a Natural Full Gait for Lower-limb Rehabilitation

G-Exos: A wearable gait exoskeleton for walk assistance

A Novel Weight-Bearing Lower Limb Exoskeleton Based on Motion Intention Prediction and Locomotion State Identification.

Online Gait Learning with Assist-As-Needed Control Strategy for Post-Stroke Rehabilitation Exoskeletons

Electrically Driven Lower Limb Exoskeleton Rehabilitation Robot Based on Anthropomorphic Design

Design and analysis of a novel 12-DOF self-balancing lower extremity exoskeleton for walking assistance

Cable-Driven Flexible Exoskeleton Robot for Abnormal Gait Rehabilitation

Dynamic Research of a Novel Exoskeleton with Level Walking.

Foot-wheel Driven Exoskeleton for Rehabilitation Training of Paraplegic Patients

Pneumatic interactive gait rehabilitation orthosis: design and preliminary testing

Dynamic Balance Gait for Walking Assistance Exoskeleton

Design and analysis of a multi-motion self-balancing lower limb exoskeleton based on flat terrain

Adaptive Gait Planning for Walking Assistance Lower Limb Exoskeletons in Slope Scenarios

Development of a Knee Actuated Exoskeletal Gait Orthosis for Paraplegic Patients with Incomplete Spinal Cord Injury: A Single Case Study

Novel Lightweight Lower Limb Exoskeleton Design for Single-Motor Sequential Assistance of Knee & Ankle Joints in Real World

Development and control of a robotic lower limb exoskeleton for paraplegic patients

Novel swing-assist un-motorized exoskeletons for gait training