Collaborative Design: New Methodologies and Technologies

Weidong Li,Weiming Shen

DOI: https://doi.org/10.1016/j.compind.2008.07.002

IF: 10

2008-01-01

Computers in Industry

Abstract:pas à les repérer, communiquez avec nous à PublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca.

What problem does this paper attempt to address?

Heterogeneous Collaborative Design of Isomeric CAD Based on Feature Data Exchange

XI Yan,PENG Wei,ZHANG San-yuan,YE Xiu-zi

DOI: https://doi.org/10.3969/j.issn.1003-188X.2006.12.063

2006-01-01

Abstract:The product exchange data technology is an important base for a heterogeneous collaborative design. A new feature-based CAD data exchange technology is presented, which is based on mapping of modeling function set. This approach ensures efficient data exchange among heterogeneous CAD systems, and high-level design intent of designer is reserved. This paper put forwards a collaborative design system which based on the feature-based CAD data exchange. Some key technologies, modeling sharing, collaborative design agent are researched. Lastly, collaborative design-implementing is proposed.
A Pear-to-pear Collaborative Product Design Platform for Dispersed Network Manufacturing

Zhan, Hongfei,Gu, Xinjian

DOI: https://doi.org/10.1049/cp:20060728

2006-01-01

Abstract:The network technology is changing our working and living greatly. Many multi-national companies cooperate in geographically different locations. They need to communicate and work concurrently on large amount of complex product data with their factories, sub-contractors as well as suppliers across the border. The use of e-mail and fax are far from satisfactory as they are time consuming and ineffective. In this paper, a pear-to-pear collaborative product design platform (CPDP) is proposed which enables authorised users in geographically different locations to cooperate and share private resources, such as collaborative design product drawing files, sharing personal knowledge or data. The system is Web-based, there is no need for the users to install any utility software at their ends since the cooperation is based thin client technology and a pear-to-pear screen sharing technique. This results in substantial saving in the cost and the product development time in a network environment.
Control Technology of Knowledge-flow in Collaborative Design

Shengfa Wang,Gu Xinjian,Zhang Taihua,Jianfeng Guo,Pan Min

2008-01-01

Abstract:The relationship between knowledge-flow and task of collaborative design was analyzed. In order to control knowledge-flow in collaborative design,a resource space model was used to depict knowledge and a method to depict knowledge through matrix was presented in the resource space model,which could control and manage the contents of knowledge-flow conveniently. Collaborative design was driven by workflow. Through integration between knowledge-flow and workflow,an integrated control panel was presented and two integrated control algorithms for knowledge-flow and workflow were given. Finally,a prototype system was developed to assist to control knowledge-flow in collaborative design and the control of knowledge-flow in collaborative was realized.
Multi-Agent Based Architecture Supporting Collaborative Product Lightweight Design

zheng liu,fuyuan xu,kai pan,xinjian gu,yongwei zhang

DOI: https://doi.org/10.1007/978-94-007-1839-5_91

2012-01-01

Abstract:Increasingly notable environmental problems facilitate more and more considerable emphasis all over the world on them that will somewhat effectively be reduced by less utilization of raw materials. Aiming at diminishing using materials and hence resulting in delicate environment, product lightweight design, indirectly promoting economic and social interest, is developed and refined with multi-agent support in this paper. Not only involving in performance parameter designing, such lightweight design also consider environmental influence, manufacturability and maintainability in the product life cycle, therefore being a collaborative design process with multi-objective optimization and iterative repetition. Firstly, multi-agent based architecture supporting collaborative product lightweight design is put forward, including detailed description of structural composition. Secondly, the core agent-CAX Agent-is introduced thoroughly. Finally, self-adjusting arm shell, as a case study, is redesigned and implemented with such collaborative architecture to validate the operation process of lightweight design.
Modification of product data for remote collaborative design

Caimao Su,Yinglin Ke

DOI: https://doi.org/10.1109/CACWD.2004.1349151

2004-01-01

Abstract:The complex contemporary design problems require collaborative solutions. The modification of product data is the important aspect for remote collaborative design process. This work presents a component agent model that is based on the finite state machine (FSM) theory and component technology. By combining the proposed agent model, collaborative design-oriented product data model with corresponding implement methods, a frame of component agent model for collaborative design is proposed, which is suitable for remote product data modification. The applications show that the proposed model can help the remote collaborative designer modify a part of product data without transferring the whole product data model.
Real-time collaborative design technology and its supportive system

Zhenyuan Lv,Ling Tian,Qiaoyu Wang

DOI: https://doi.org/10.3321/j.issn:1002-0470.2005.08.009

2005-01-01

Abstract:In view of the characteristics of multi-object, coordination, flexibility and synchronization in real-time network collaborative design process, a detailed discussion of real-time collaborative design methods, graphics technology and communication technology is given. Based on this, the architecture of the real-time collaborative design platform is constructed, and the design and realization of the collaborative viewing and markup tool is mainly explained. This platform is an effective tool, which enables geographically dispersed designers to communicate based on product models in net-based environments.
A Web-Based Collaborative Product Design Platform for Dispersed Network Manufacturing

HF Zhan,WB Lee,CF Cheung,SK Kwok,XJ Gu

DOI: https://doi.org/10.1016/s0924-0136(03)00156-0

IF: 6.3

2003-01-01

Journal of Materials Processing Technology

Abstract:Many multi-national companies have operations in geographically different locations. They need to communicate and work concurrently on large amount of complex product data with their factories, sub-contractors as well as suppliers across the border. The use of e-mail and fax are far from satisfactory as they are time consuming and ineffective. In this paper, a web-based collaborative product design platform is proposed which enables authorized users in geographically different locations to have access to the company’s product data such as product drawing files stored at designated servers and carry out product design work simultaneously and collaboratively on any operating systems. There is no need for the users to install any utility software at their ends since the access is based on a remote screen sharing technique built upon a Browser/Server and thin client technology. This results in substantial saving in the cost and the product development time in a network environment.
Research on collaborative conceptual design based on distributed knowledge resource

Bin He,Peien Feng

DOI: https://doi.org/10.1007/s00170-012-4355-1

IF: 3.563

2012-01-01

The International Journal of Advanced Manufacturing Technology

Abstract:Conceptual design is an early stage of the whole product development process, which involves the generation of solutions to satisfy the design requirements. It is a crucial issue on how to find proper principle solutions from enormous, isomeric, and even distributed knowledge resources repositories and then ally with these correlative distributed knowledge resources providers to collaborative conceptual design. Design is a task-solving process using corresponding resource, so it does not always have an agency in product design. This paper proposes a model of collaborative conceptual design based on distributed knowledge resources, which is centered on design tasks and based on dynamic knowledge alliance without agency. After a model of knowledge resource unit and a model of Web services based on knowledge resource are proposed, a virtual quantitative and qualitative knowledge resource representation based on knowledge grid is then put forward. The mixed knowledge resource repository is also proposed to support collaborative conceptual design. The strategies of knowledge register, publish, storage, reorganization, orientation, and problem solving based on mixed knowledge resource repository are then discussed in detail. The data exchange mode of principle solutions is then described. The selection strategy of dynamic knowledge alliance members is established. The framework of distributed knowledge resource is also put forward to support collaborative conceptual design. The process of collaborative conceptual design based on distributed knowledge resource is then proposed. The conceptual design of new devices for decreasing resistance of amphibious vehicles is given as an example, which demonstrates that the methodology is obviously helpful to produce valuable principle solutions with distributed knowledge for product innovation.
Collaborative model for concurrent product design

Peng Song,Min Tang,Jinxiang Dong

DOI: https://doi.org/10.1109/CSCWD.2001.942259

2002-01-01

Abstract:With the demand of distributed designers to cooperatively design a single product, these designers need to simultaneously access a common database, which holds the geometric model and other information of the product. But frequently, their design will lead to invalid results. Therefore, it is very important to build a distributed model to coordinate these designers to ensure the consistency of the product. The paper introduces a collaborative model to support this concurrent work. First, the architecture of this system is presented. Then a collaborative design model is described in detail. We analyze two reasons for the conflict and give two collaborative modes to coordinate the design process. These two modes can be used in different environments and can be used in a mixed way. So we can keep the consistency of the common solid model and maintain the maximal freedom of the designers at the same time. Finally, we give some design examples to further illustrate our model
Management methods and tools of network collaborative product design process

YD Qian,GJ Zheng,HF Zhan,XJ Gu

2003-01-01

Abstract:Network collaborative design process is a flexible procedure, which emphasizes multi-object, coordination, community and flexibility, and needs to be supported with excellent management methods and good management tools. This paper brings forward the hiberarchy of management methods of network collaborative product design process. This hiberarchy consists of three parts: share-resource management, real time communion management and task coordination management. The cases of management tools of network collaborative product design process developed by the research group have been made as examples.
Le travail collaboratif dans le cadre d'un projet architectural

Marie-France Ango-Obiang

DOI: https://doi.org/10.48550/arXiv.0706.1780

IF: 6.4588

2007-06-12

Human-Computer Interaction

Abstract:The analysis of the practices and the tendencies of the users at the time of the search for information on Internet makes it possible to highlight several points. The search for information becomes powerful after knowledge of the typology of the various systems of research. This typology supports the adoption of a methodology of research which one can characterize by pull systems, intelligent agents, etc. In addition, the importance of the structure of the electronic document, correctly elaborated in advance, will support a higher relevance ratio to find information. In our article, the problems turn around the study of the behavior of the users in situation of search for information, as well as the constitution of a pole of documentary resources within a framework of an architectural project. It is noted that the evolution of the documentary resources is related to information technologies.
Web Based Remote Collaborative Design System (Cdesign)

WU Huapeng,ZHANG Haixia,XIE Hongchao,CHEN Darong

DOI: https://doi.org/10.3321/j.issn:1000-0054.2000.05.017

2000-01-01

Abstract:Remote collaborative design is a new collaborative study mechanism using information and network technologies. This paper analyzed the purpose and architecture of a web based remote collaborative design system (Cdesign). The system structure is a Client/Server structure with clients and servers interact through the Web. The main modules of the Cdesign system, such as the management module, the collaboration module, and the security module, ware analyzed.
Research and development on collaborative product design tools for mass customization

ZX Yang,XJ Gu,YD Qian,W Sun,XB Liu

2003-01-01

Abstract:The realization of mass customization need synthetically apply modern design method, information technologies, management method and so on. In the paper, we introduce collaborative product design tools for mass customization. which help to implement MC. These tools include the investigation tool for customers' needs, the parts information coding and search tool, the product configuration design tool, the product variant design tool, the knowledge management tool, the standard parts management tool, the collaborative design process management tool, etc..At the same time, main characters of the tools are analyzed.
Research on collaborative design of space remote sensor based on Teamcenter

Yanhua Wu,Fuqing Li,Weizhi Wang,jian Sun,yan Yang,ying Che

DOI: https://doi.org/10.1117/12.2579863

2020-11-05

Abstract:With the development of national economy and the advancement of aerospace technology, modern aerospace optical remote sensors are becoming more and more complex systems with diverse functions and performance, at the same time, there is clear demand for rapid response. Traditional design methods can no longer meet the development requirement of modern aerospace optical remote sensors, so the new methods are urgently needed. Based on Siemens PLM software Teamcenter, this paper carried out the rapid development research of the full life cycle of the apace remote sensors, and established a collaborative design environment from index requirements to optical design, structural design, simulation analysis, and three-dimensional annotation and achieved system engineering, structural design, optical design, CAE design collaboration. First of all, the remote sensor demand and system index management environment were established on the TC environment, and the system index was transferred to the optical design. Secondly, based on the XML technology, the one-key update of the optical design parameters to the mirror skeleton model of the remote sensor was realized, which accelerated the iteration process of optical design and structure design. Third, based on the CREO skeleton modeling technology, realized the Top-Down design of complex optical remote sensors, improved the efficiency of collaborative design of structural design. Further opened up the multi-source data management link, realized structural design and simulated the full life cycle of data analysis management. Then, using 3D annotation technology, the 3D model was directly shipped to the factory, which improved the true transfer of design intent, shortened the drawing cycle and improved production efficiency. Finally, taking the development of a complex optical remote sensor as an example, the practical application of collaboration design was given. The research results show that based on TC collaborative design method were practical and feasible in the design of an aerospace remote sensor, and had good application prospects, which can significantly improve the design efficiency of the remote sensor and shorten the development cycle.
A Cooperative-Collaborative Design System for Multi-Disciplinary Mechanical Design

Zhiqiang Chen,Zahed Siddique

DOI: https://doi.org/10.1115/detc2005-85005

2005-01-01

Abstract:The emergence of computer and network technology has provided opportunities for researchers to construct and build systems to support dynamic, real-time, and collaborative engineering design in a concurrent manner. This paper provides an understanding of the product design in a distributed environment where designers are. in different geographic locations and are required to be involved in the design process to ensure successful product design. A design process model that captures the major interactions among stakeholders is presented, based on the observation of cooperation and collaboration. The stakeholders' interactions are divided into activity and system level to distinguish the interactions in group design activities and design perspective evolution. An initial computer implementation of the design model is presented. The design system consists of a set of tools associated with design and a management system to facilitate distributed designers to support various design activities, especially conceptual design.Our research emphasis of design collaboration in this paper is: (i) Model a Cooperative-collaborative design process; (ii) Support synchronized design activities; and (iii) Structure the complex relations of various design perspectives from engineering disciplines.
A Digital Graphic Statics Method for Design Shared Design Tools for Architects and Engineers

Corentin Fivet,Meng Xianchuan

DOI: https://doi.org/10.3969/j.issn.0529-1399.2017.11.004

2017-01-01

Abstract:Architects and engineers have issues to cooperate at the conceptual design stage.What should be future tools like if they are shared by both designers? This paper attempts to reveal the cooperative process which fully integrates architectural and structural concerns,and provides an account of experimental applications where forces and forms are designed simultaneously.
Collaborative Knowledge Management For Engineering Design: A Framework

Hongwei Wang,Yanwei Zhao,Heming Zhang

2016-01-01

Abstract:Design knowledge is multi-faceted and its effective management is the key for enterprises to attain a competitive advantage and produce innovation. Current research on design knowledge capture and reuse is mostly focused on either explicit knowledge or tacit knowledge. Thus, interaction and integration of the boundaries of the informal aspects and formal aspects of design knowledge is not well addressed, which has led to the development of very intrusive knowledge tools. This work aims to address this gap by proposing a novel Collaborative Knowledge Management (CKM) framework that enables the capture of both knowledge objects and designer's communications in creating these objects. Such as framework places designers at the very center of a knowledge management process and emphasizes their collaborative work in knowledge creation, dissemination and documentation. This paper details the key elements and methods of the proposed framework, discusses key enabling technologies for its implementation, introduces some preliminary work on a CKM system and makes some recommendations.
Building design teamwork supported by a collaborative CAD modeling process analysis

S. Scheer,Michele Beber,C. Filho,Fabíola Azuma

Abstract:Collaborative tools are information systems which allow document sharing through local area networks, intranets and extranets. Collaborative design can be a solution to increase the productivity and the final quality of the product in a building design office. In this way it is possible to assure the information integration and also the data integrity during the design process based on computer network communication. The goal of this article is to analyze how one CAD system (ArchiCAD software Graphisoft/Nemetschek) can support a collaborative teamwork structured on an integrated model for different design views. In this model, the tasks are assigned by a coordinator and executed by the designers in different places following the client-service scheme. It is intended to contribute with the diffusion of this kind of information technology tool and to present its potentiality for the improvement of the design performance. The research method used was exploratory case studies of the development design. In these case studies, communication guidelines had been applied to verify the software behavior in relation to the task execution in a shared framework. The use of the collaborative CAD modelling in the development design provided information sharing, track and control of document versions and also the integration of design modifications in such automatic and simultaneous way between different computers used.

Engineering,Computer Science
Research of Collaborative Design Process Management Based on Activity Method

Hao Yongping,Zhang Jianfu,Shi Chunjing,Shao Weiping

DOI: https://doi.org/10.3969/j.issn.1009-1742.2005.12.012

2005-01-01

Engineering Science

Abstract:By analyzing the components of an activity and the relationship of the process modeling,a topological structure of the collaborative design process management system was presented.According to the situation and characteristic of the product development process,a number of the important issues about process modeling,AU design environment,process monitoring and the data exchange between systems were discussed.At last,a user interface of the collaborative design environment and the display of process monitoring are also given.
Study on the methodology and application of meta schema-based collaborative design

Jiehan Zhou,Wenhui Fan,Guangleng Xiong

2002-01-01

Abstract:Collaborative design is a significant feature for multidisciplinary, product design. The key to collaborative design is the sufficient information-sharing of product model. STEP and CORBA are the major supporting technology for integrating heterogeneous systems for multidisciplinary product design. Current frameworks based on STEP and CORBA reveal weaknesses in various-areas, such as information-sharing, components interoperation, and developer productivity. Spaceflight product is a typical multidisciplinary product across the boundary of mechanics, electronics, control and software engineering domains. An attempt has been made in this paper to review a case of spaceflight product on collaborative design with the objective to: 1) analyze the main issues in the current computer integration systems for multidisciplinary product design and propose a To-Be paradigm of collaborative design. 2) introduce meta schema-based collaborative design which covers three core technologies: independence of product data from their processing technologies such as programming languages and operating systems; Description and exchange of product data on Internet; Meta framework with the functions of data transfer between XML document and database, and self-adapted component generation. 3) study the concepts related to meta scheme, including design pattern, metadata, meta language and meta framework. 4) Explore a meta schema-based collaborative design solution of spaceflight product development. 5) Discuss the further studies on meta schema-based collaborative design.

Collaborative Design: New Methodologies and Technologies

Heterogeneous Collaborative Design of Isomeric CAD Based on Feature Data Exchange

A Pear-to-pear Collaborative Product Design Platform for Dispersed Network Manufacturing

Control Technology of Knowledge-flow in Collaborative Design

Multi-Agent Based Architecture Supporting Collaborative Product Lightweight Design

Modification of product data for remote collaborative design

Real-time collaborative design technology and its supportive system

A Web-Based Collaborative Product Design Platform for Dispersed Network Manufacturing

Research on collaborative conceptual design based on distributed knowledge resource

Collaborative model for concurrent product design

Management methods and tools of network collaborative product design process

Le travail collaboratif dans le cadre d'un projet architectural

Web Based Remote Collaborative Design System (Cdesign)

Research and development on collaborative product design tools for mass customization

Research on collaborative design of space remote sensor based on Teamcenter

A Cooperative-Collaborative Design System for Multi-Disciplinary Mechanical Design

A Digital Graphic Statics Method for Design Shared Design Tools for Architects and Engineers

Collaborative Knowledge Management For Engineering Design: A Framework

Building design teamwork supported by a collaborative CAD modeling process analysis

Research of Collaborative Design Process Management Based on Activity Method

Study on the methodology and application of meta schema-based collaborative design