Abstract:Recently, the interconnection bandwidth of the data center is rapidly increasing. To satisfy the requirement for the high-performance data center, a 4-channel 2.5D silicon photonic transmitter is proposed and the packaging structure could increase the high-density scalability of the architecture for 1.6T3.2T co-packaging optics (CPO) module. The electrical driver and silicon photonic Mach-Zehnder modulator (MZM) are mounted to the silicon interposer by the micro-bumps. Meanwhile, the silicon interposer is mounted to the low temperature co-fired ceramic by the solder balls. The 2.5D transmitter is assembled to the motherboard by the high-speed ball grid array (BGA) connector to make it convenient to be replaced. The electrical optimization is implemented to make the insertion loss of the whole passive link within 1.55 dB under 40 GHz, which ensures the transmitter with the socket transmit the clear simulated eye diagram at 64 Gbps PAM4 rate per channel. Moreover, the thermal evaluation is performed, which includes the heat- dissipation evaluation and the thermal-induced impact on the edge light coupling. Finally, the substrates in the 2.5D transmitter are fabricated and the transmitter is realized by the improved assembly method. By the verification of the measurement, the 2.5D transmitter we proposed could work at 64 Gbps PAM4 signal transmission rate per channel with the 6pJbit power consumption. Regardless of the bandwidth of the electronic integrated circuit (EIC)MZM and the BGA connector, based on the simulation electrical bandwidth, it is potential for realizing 100 Gbps PAM4 signal transmission.

Design Consideration of 6.25 Gbps Signaling for High-Performance Server

Advanced RF/baseband Interconnect Schemes for Inter- and Intra-Ulsi Communications

High-Baudrate SiP and InP Modulators for Data Center Interconnects

D-band CMOS Transmitter and Receiver for Multi-Giga-bit/sec Wireless Data Link

SIGNAL PROPAGATION IN HIGH SPEED DIFFERENTIAL TRANSMISSION LINE USING PARALLELIZED FINITE-DIFFERENCE TIME-DOMAIN METHOD

High-speed serial interconnect transceiver: Applications and design

Design of High-Speed Data Transmission System for IC Test

Analysis of System Level Signal Integrity for High Speed Interface Design Based on GTY Transceivers

DESIGN AND IMPLEMENTATION OF HIGH-SPEED SCALEABLE INTERCONNECTION NETWORK:TH-GBNET

Design and Implementation of FPGA Based High-Speed Bus for Control System

Design and Implement of RS485 High Speed Data Communications Protocol

A Multiprocessor Communication Architecture For High Speed Networks

Dual- Channel High- Speed Data Transmission System of Industrial CT

Design of High-Speed Data Transmission System Based on Fiber Channel

High Speed Serial Interface Transmitter Controller Based on JESD204B for 1GSPS ADCs

Practical Solutions for 400 Gbit/s Data Center Transmission

Data Transfer Performance Analysis and Enhancement of Critical 3D Interconnects in a 3D SiP Based on Communication Channel Modeling Methodology

A Scalable Adaptive ADC/DSP-Based 1.25-to-56Gbps/112Gbps High-Speed Transceiver Architecture Using Decision-Directed MMSE CDR in 16nm and 7nm

Design and Realization of Multi-Channel and High-Bandwidth 2.5D Transmitter Integrated With Silicon Photonic MZM

A multi-mode multi-node high-speed transmission design

Design of an In-line Packet Transceiver for 10 Gb/s Ethernet