Abstract:Purpose: Cortical thickness and density are critical components in determining the strength of bony structures. Computed tomography (CT) is one possible modality for analyzing the cortex in 3D. In this paper, a model-based approach for measuring the cortical bone thickness and density from clinical CT images is proposed. Methods: Density variations across the cortex were modeled as a function of the cortical thickness and density, location of the cortex, density of surrounding tissues, and imaging blur. High resolution micro-CT data of cadaver proximal femurs were analyzed to determine a relationship between cortical thickness and density. This thickness-density relationship was used as prior information to be incorporated in the model to obtain accurate measurements of cortical thickness and density from clinical CT volumes. The method was validated using micro-CT scans of 23 cadaver proximal femurs. Simulated clinical CT images with different voxel sizes were generated from the micro-CT data. Cortical thickness and density were estimated from the simulated images using the proposed method and compared with measurements obtained using the micro-CT images to evaluate the effect of voxel size on the accuracy of the method. Then, 19 of the 23 specimens were imaged using a clinical CT scanner. Cortical thickness and density were estimated from the clinical CT images using the proposed method and compared with the micro-CT measurements. Finally, a case-control study including 20 patients with osteoporosis and 20 age-matched controls with normal bone density was performed to evaluate the proposed method in a clinical context. Results: Cortical thickness (density) estimation errors were 0.07 ± 0.19 mm (-18 ± 92 mg/cm(3)) using the simulated clinical CT volumes with the smallest voxel size (0.33 × 0.33 × 0.5 mm(3)), and 0.10 ± 0.24 mm (-10 ± 115 mg/cm(3)) using the volumes with the largest voxel size (1.0 × 1.0 × 3.0 mm(3)). A trend for the cortical thickness and density estimation errors to increase with voxel size was observed and was more pronounced for thin cortices. Using clinical CT data for 19 of the 23 samples, mean errors of 0.18 ± 0.24 mm for the cortical thickness and 15 ± 106 mg/cm(3) for the density were found. The case-control study showed that osteoporotic patients had a thinner cortex and a lower cortical density, with average differences of -0.8 mm and -58.6 mg/cm(3) at the proximal femur in comparison with age-matched controls (p-value < 0.001). Conclusions: This method might be a promising approach for the quantification of cortical bone thickness and density using clinical routine imaging techniques. Future work will concentrate on investigating how this approach can improve the estimation of mechanical strength of bony structures, the prevention of fracture, and the management of osteoporosis.

Accurate Thickness Measurement of Two Adjacent Sheet Structures in CT Images

Hip Cartilage Thickness Measurement Accuracy Improvement

Accuracy Analysis for Thickness Determination of Thin Sheet Structure under the Influence of Proximate Thin Sheet Structure Using Mr Images

Calibration of Thickness Measurement Errors of Hip Joint Cartilage from MR Images

Accuracy analysis of thickness measurement for two adjacent sheet structures in CT images

An Analysis Algorithm for Accurate Determination of Articular Cartilage Thickness of Hip Joint from MR Images.

Accuracy Limits for the Thickness Measurement of the Hip Joint Cartilage in 3-D MR Images: Simulation and Validation

A Novel Method For Boundary Detection And Thickness Measurement Of Two Adjacent Thin Structures From 3-D Mr Images

High resolution cortical bone thickness measurement from clinical CT data

Thickness Measurement of Femoral Cartilage on Hip Joint in MRI

Research on Three-dimensional Cartilage Thickness Measurement of Femoral Head in Magnetic Resonance Images

A Technique for Visualization and Mapping of Local Cartilage Thickness Changes in Mr Images of Osteoarthritic Knee

Technical Note: Cortical thickness and density estimation from clinical CT using a prior thickness-density relationship

Variations in knee cartilage thickness: Fully automatic three-dimensional analysis of MRIs from five manufacturers

Reconstruction and Optimization of the 3D Geometric Anatomy Structure Model for Subject-Specific Human Knee Joint Based on CT and MRI Images

Knee Cartilage Estimation Based on Knee Bone Geometry Using Posterior Shape Model

Knee-Cartilage Segmentation and Thickness Measurement from 2D Ultrasound

An Analysis by Synthesis Method that Allows Accurate Spatial Modeling of Thickness of Cortical Bone from Clinical QCT

Independent measurement of femoral cortical thickness and cortical bone density using clinical CT

Ultrasonic cartilage thickness measurement is accurate, reproducible, and reliable—validation study using contrast-enhanced micro-CT

A New Accurate and Precise 3-D Segmentation Method for Skeletal Structures in Volumetric Ct Data