Abstract:Purpose This paper aims to evaluate the inhibitive effect and adsorption behavior of the 2-amino-5-thiol-1,3,4-thiadiazole vanillin (A) on copper in 3 per cent NaCl solution. Design/methodology/approach A thiazole Schiff bases were synthesized, named, 2-amino-5-thiol-1,3,4-thiadiazole vanillin (A), which was fabricated respectively on copper surface by the molecular self-assembled. Evaluation was carried out by electrochemical measurement and surface analysis techniques. Measurement of static friction coefficient scanning electron microscopy and Contact angle analysis were applied, and it is finally confirmed the existence of the adsorbed film. The inhibitive mechanism of A was evaluated by means of quantitative calculation and molecular dynamics simulation. Findings The electrochemical measurement indicated that the self-assembled molecular film can effectively inhibit the corrosion of copper sheet, when the concentration was 15 mmol.L-1 and the assembly time was 6 h, the corrosion inhibition effect was the best, reaching as high as 97.5 per cent. Scanning electron microscopy results showed that the Schiff base compound forms a protective film on the surface of the copper, which effectively blocks the transfer of corrosion particles to the metal substrate, thereby inhibiting the occurrence of corrosion. Adsorption behavior of A followed the Langmuir's adsorption isotherm and attributed to mixed-type adsorption. The results of Quantitative calculation and molecular dynamics simulation showed that A was adsorbed on Cu (111) surface in parallel. Research limitations/implications - In this study, the corrosion inhibition properties of Schiff base film were investigated by combining theory with experiment. Theoretical calculation is helpful to guide the synthesis of efficient and environmentally friendly corrosion inhibitors. Practical implications - The damage caused by metal corrosion is great. The self-assembled Schiff base membrane synthesized in this paper is simple and compact, and the corrosion inhibition efficiency of copper in 3 per cent NaCl solution is 97.5 per cent. Social implications - Inhibition of metal corrosion can better save energy and reduce economic losses. Originality/value - The synthesized Schiff base was prepared on the copper surface by the molecular self-assembled. The Schiff base membrane has a good corrosion inhibition effect on copper in 3 per cent NaCl solution, and the corrosion inhibition efficiency is up to 97.5 per cent.

Corrosion properties of sodium carboxymethyl cellulose on metal surface base on molecular dynamics simulation

Corrosion Inhibition and Adsorption Behavior of (3-Aminopropyl)-triethoxysilane on Steel Surface in the Simulated Concrete Pore Solution Contaminated with Chloride

Sodium dodecylbenzene sulfonate film absorbed on magnesium alloy surface: An electrochemical, SKPFM, and molecular dynamics study

Mechanical-induced functionalization of graphene with sodium carboxymethyl cellulose toward enhancing anticorrosion performance of waterborne epoxy coatings

Dramatic improvement in corrosion inhibition effect of carboxymethyl cellulose by modified with levodopa: Experimental study and first-principles calculations

Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations

Investigation of the inhibition properties and mechanism of salicylaldoxime for copper corrosion via experimental and theoretical methods

Microscopic Influence Mechanisms of Polysaccharide on the Adsorption and Corrosion Inhibition Performance of Imidazoline on Metal Surface

Influence of sodium alginate and chromate on aluminum corrosion in simulated HVDC cooling water

The adsorption of two organic inhibitors on stainless steel passive film: A reactive force field study

Corrosion inhibition performance of azelaic acid dihydrazide: a molecular dynamics and Monte Carlo simulation study

Anticorrosion Effect of Ethoxylate Sulfanilamide Compounds on Carbon Steel in 1 M Hydrochloric Acid: Electrochemical and Theoretical Studies

Study on the preparation and corrosion inhibition of Schiff-base self-assembled membranes

Corrosion resistance and molecular dynamics behavior of the MAO/SAM composite coatings on magnesium alloy

Sodium dodecyl sulfate (SDS) as an effective corrosion inhibitor for Mg-8Li-3Al alloy in aqueous NaCl: A combined experimental and theoretical investigation

Surface adsorption and corrosion resistance performance of modified chitosan: Gravimetric, electrochemical, and computational studies

Adsorption behavior and corrosion inhibition performance of tetrazolium derivatives on electrolytic copper foil surface

A Study on Inhibition Performance of Mercaptoalcohols As Corrosion Inhibitors by First Principle and Molecular Dynamics Simulation

Corrosion inhibition performance of organic compounds and theoretical calculations based on density functional theory (DFT)

Corrosion inhibition performance of synergistic inhibitors on Q235 steel in methanol/formic acid medium

Enhanced removal of heavy metals from electroplating wastewater through electrocoagulation using carboxymethyl chitosan as corrosion inhibitor for steel anode