Abstract:Ammonia, as a carbon-free, hydrogen-rich and renewable fuel, is of great significance for building the zero- carbon emission energy supply system in the word. However, the drawbacks of high ignition energy and high NOx emissions limit its widespread application. Catalytic combustion provides a reliable option for NH3 combustion. In the study, the catalyst of Ag/CuOx@SiO2 catalyst with high-temperature catalytic activity was prepared, and the catalytic flow reactor was employed to evaluate the ability of the catalyst in enhancing NH3 oxidation and removal NOx during NH3-rich combustion with high temperature region (900 K similar to 1400 K) and wide equivalence ratio range (0.4 similar to 1.2). The high-temperature catalytic activity of the catalyst was proved by XPS spectrogram that the valence states of Ag and CuOx species in the catalyst have not been changed after the catalytic combustion. The results of catalytic combustion indicated that the catalyst enhanced the NH3 oxidation significantly. Compared to NH3 combustion, the temperature of 100 % NH3 conversion (T100) was decreased by over 500 K during NH3 catalytic combustion. Moreover, catalytic combustion performed higher efficiency on enhancing NH3 oxidation than the approach of co-firing NH3 with higher reactive gas fuels. The T-100 of NH3 catalytic combustion was lower by 200 K similar to 220 K than that of NH3/H-2 and NH3/CH4 combustion. Furthermore, the catalyst reduced the NOx effectively during NH3/H-2 and NH3/CH4 combustion. At 1400 K, NO selectivity during NH3/H-2 and NH3/CH4 catalytic combustion reduced by 86.80 %similar to 90.42 % and 43.61 %similar to 61.42 % compared to the combustion, respectively. Additionally, the peak of N2O selectivity moved to lower temperature range during catalytic combustion. Especially in stoichiometric and fuel rich conditions, the peak temperature reduced by 100 K similar to 200 K. The study provided references for the development of catalysts in ammonia-rich fuel catalytic combustion.

Heat Treatment Improves the Activity and Water Tolerance of Pt/Al 2 O 3 Catalysts in Ammonia Catalytic Oxidation

Designing a Bifunctional Pt/Cu-SSZ-13 Catalyst for Ammonia-Selective Catalytic Oxidation with Superior Selectivity

Structural Properties of PtCuO/Al2O3 surface catalyst for selective NH3 oxidation using operando spectroscopy

Regulating the valence and size of the active center of Co/Al2O3 catalyst improved the performance and selectivity of NH3-SCO

Promotional Effects of Ethylenediamine on the Low-Temperature Catalytic Activity of Selective Catalytic Oxidation of Ammonia over Pt/SiAlOx: States and Particle Sizes of Pt

Selective catalytic oxidation of ammonia to nitrogen over zeolite-supported Pt-Au catalysts: Effects of alloy formation and acid sites

Promoting effect of acid sites on NH3-SCO activity with water vapor participation for Pt-Fe/ZSM-5 catalyst

Progress of Ammonia Selective Catalytic Oxidation Research and Performance Improvement Strategy

Optimization of Isolated Copper Species on the NH3-SCR Performance over Cu/SSZ-39 Modified by Ammonia Water

Optimization of isolated copper species on the NH 3 -SCR performance over Cu/SSZ-39 modified by ammonia water

Fine-Tuning of Pt Dispersion on Al<sub>2</sub>O<sub>3</sub> and Understanding the Nature of Active Pt Sites for Efficient CO and NH<sub>3</sub> Oxidation Reactions

Improving the NH3 Oxidation and Removing NOx During Ammonia-Rich Fuel Catalytic Combustion Using the Ag/CuOx@SiO2 Catalyst with High-Temperature Catalytic Activity

Characterization of Commercial Cu-SSZ-13 and Cu-SAPO-34 Catalysts with Hydrothermal Treatment for NH3-SCR of NOx in Diesel Exhaust

Effect of Heat Treatment Temperature on the Pt3Co Binary Metal Catalysts for Oxygen Reduced Reaction and DFT Calculations

Improved hydrothermal durability of Cu-SSZ-13 NH3-SCR catalyst by surface Al modification: Affinity and passivation

The enhancement effect of Cu modification on N2 selectivity of V0.5/Pt0.04/TiO2 catalyst for selective catalytic oxidation of NH3

A mixed catalyst prepared by mechanically milling VW/TiO2 and low content of Pt/Al2O3 for SCO of high-concentration NH3

Study on Effect of Calcination and Ag Loading on Ag/TiO2 Catalyst for Low-Temperature Selective Catalytic Oxidation of Ammonia

Influence of the heat treatment on structural and functional characteristics of the PtCu/C electrocatalysts on various carbon supports

Effects of Heat Treatment Atmosphere on the Structure and Activity of Pt3Sn Nanoparticle Electrocatalysts: a Characterisation Case Study.

Atomic layer deposition of silica to improve the high-temperature hydrothermal stability of Cu-SSZ-13 for NH3 SCR of NOx