Biosorption of au from leachates of waste printed circuit boards by baker's yeast

Shunpei Suzuki,Haruka Iijima,Yoshio Kobayashi,Yojiro Yamamoto,Hiroshi Shiigi,Norizoh Saitoh,Yasuhiro Konishi
DOI: https://doi.org/10.1016/j.hydromet.2024.106323
IF: 4.217
2024-04-30
Hydrometallurgy
Abstract:A microbial method using commercially available baker's yeast was developed for efficiently and selectively collecting aqueous Au(III) ions in aqua regia leachates from waste printed circuit boards (PCBs) through biosorption under air at temperatures ranging from 10 °C to 34 °C. Even when the total concentration of base metals was much higher than the initial Au concentration in the PCB leachate with high acid concentrations of 4.7–5.6 mol/L, commercial dry baker's yeast exhibited an excellent ability to selectively collect aqueous Au ions from the leachate within 60 min. When the biosorption test was repeated as a three-stage batch operation, the percentage biosorption of Au from the PCB leachate increased from 61% to 99% with 36 g/L dry yeast cells at 34 °C. The experimental results for the three-stage batch biosorption test were consistent with theoretical predictions based on the material balance of Au in multistage equilibrium operations and the distribution coefficient of Au. Equilibrium data of the Au biosorption conformed to the linear isotherm, regardless of the yeast concentration and the initial Au concentration in the leachate. The distribution coefficient K Au at 34 °C decreased by 30%, from 53.7 to 37.3 L/kg-dry cells, as the total base metal concentration in the leachate was increased tenfold, from 1.94 to 16.4–19.1 g/L. Moreover, the distribution coefficient of Au at 10 °C to 34 °C was analyzed to determine thermodynamic parameters according to the van't Hoff equation. The thermodynamic studies indicated that the biosorption of aqueous Au ions by baker's yeast was spontaneous and exothermic.
metallurgy & metallurgical engineering
What problem does this paper attempt to address?