Abstract:This work presents an approach to develop, study, and optimize the performance of flexible temperature sensors. With the development of Industry 4.0 and the smartification of control processes, there is a high demand for inexpensive, flexible, and seamless sensors that can be adapted to various applications. Concerning the development of flexible printed temperature sensors, the most frequently used materials include silver, carbon allotropes, and polymers such as PEDOT:PSS. PEDOT:PSS presents great electrical properties, optical transparency, and is inkjet printing compatible. Unfortunately, most PEDOT:PSS and PEDOT:PSS-based composite temperature sensors still lack sensitivity, and do not present linear behavior, which challenges their use and reliability. Hence, in this work, different designs of inkjet-printed PEDOT:PSS sensors were studied, to determine if their performance could be improved by modifying their layout. The effects of the number of printed layers and printing orientation were also evaluated. The same study was repeated for encapsulated and non-encapsulated sensors. The thermal response of the sensors was studied throughout heating-cooling cycles from 25 – 60 °C, and by changing the design, it was possible to improve the sensitivity by 40 %, decrease cycle offset by about 60 % and increase linearity for R2 values close to 1. Design and width of printed layers were uncovered as the more impacting factors for these results. The flexibility of the sensors was demonstrated as well, ensuring their functionality under bending.

Temperature Sensitivity Control of an Inkjet-Printed Optical Resonator on Pillar

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Theoretical study of microfiber resonator devices exploiting a phase shift

A Temperature Sensor Based on Optical Microfiber Knot Resonator

A New Route for Fabricating Polymer Optical Microcavities.

Packaged Tapered Fiber and SU-8 Hemispherical Resonator for Thermal Sensing

Suspended whispering gallery mode resonators made of different polymers and fabricated using drop-on-demand inkjet printing for gas sensing applications

Ultrasensitive and Multifunction Plasmonic Temperature Sensor with Ethanol-Sealed Asymmetric Ellipse Resonators

Multiplexed fiber-optic Fabry-Pérot cavities for refractive index and temperature sensing fabricated using diamond-blade dicing

A Design of Experiments Study on Inkjet Printed PEDOT:PSS Temperature Sensors

Direct 3D-printed ring-resonator photonic circuit on a dual core fiber tip for remote sensing applications

On-Chip Hotplate for Temperature Control of Cmos Saw Resonators

Femtosecond Laser Microprinting of a Polymer Optical Fiber Interferometer for High-Sensitivity Temperature Measurement

On-chip thermo-optic tuning of suspended microresonators

Dual Sensitization Enhancement in Cavity Optomechanics for Ultra-High Resolution Temperature Sensing

Preparation and performance optimization of resistive flexible temperature sensors prepared by inkjet printing method

The Influence of Microstructure on TCR for Inkjet-Printed Resistive Temperature Detectors Fabricated Using AgNO3/Ethylene-Glycol-Based Inks

Temperature Characteristics of Microfiber Coil Resonators Embedded in Teflon

Tailoring ink-substrate interactions via thin polymeric layers for high-resolution printing

In-Fiber Polymer Microdisk Resonator and Its Sensing Applications of Temperature and Humidity

Modification of Inkjet Printer for Polymer Sensitive Layer Preparation on Silicon-Based Gas Sensors