Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Wire arc additive manufacturing (WAAM) is a technology that has revolutionized the fabrication of large metallic components in various industries. However, previous studies have predominantly relied on trial and error or statistical techniques to determine process parameters, neglecting the potential of evolutionary algorithms for optimizing. In the present work, detailed investigations were performed on the WAAM-based gas tungsten arc welding to predict and optimize the process parameters of the 316L austenitic stainless steel. The input process parameters viz., current, wire feed speed, travel speed, and wire feed direction play a significant role in determining the single bead geometry. The study investigated the influence of these parameters on bead characteristics (such as height to width ratio and percentage dilution) and surface roughness. Multiobjective optimization was carried out using both the response surface methodology-desirability approach (RSM-DA) and the non-dominated sorting genetic algorithm-II (NSGA-II). In the case of NSGA-II, the optimal parameters were determined through a fuzzy decision method and it was validated experimentally. The NSGA-II approach showed superior performance over the traditional RSM-DA model in predicting the responses. In addition, the thin-walled structure printed for the parameters suggested using RSM-DA and NSGA-II approach. In a comprehensive property-based comparative analysis, the NSGA-II optimized parameters demonstrated improved mechanical properties attributed to increased low-angle grain boundaries and kernel average misorientation values. This study highlights the effectiveness of evolutionary computation methods in achieving superior performance and mechanical characteristics in the fabrication of SS316L components.

Microstructural and mechanical characterization of direct energy deposited 316L stainless steel developed using an evolutionary computational approach

Microstructure and Mechanical Properties of 304L Steel Fabricated by Arc Additive Manufacturing

Improving mechanical strength and isotropy for wire-arc additive manufactured 304L stainless steels via controlling arc heat input

Experimental characteristics of 316L stainless steel thin wall processed in wire-based arc additive manufacturing process

Optimization of process parameters of cold metal transfer welding-based wire arc additive manufacturing of super Duplex stainless steel using response surface methodology

Wire Arc Additive Manufacturing: A Comprehensive Review and Research Directions

Experimental study of shielding gas concentration on mechanical properties of stainless steel alloy parts using wire and arc additive manufacturing

Investigations and Multi-response Optimization of Process Parameters for SS316L Cold Metal Transfer-Wire Arc Additive Manufactured Samples

The Effects of Processing Parameters during the Wire Arc Additive Manufacturing of 308L Stainless Steel on the Formation of a Thin-Walled Structure

Microstructural Evolution, Mechanical and Electrochemical Performance of Duplex Stainless Steel Fabricated by Wire Arc Additive Manufacturing with ER2209 Filler Wire

Mechanical behavior of austenitic stainless steels produced by wire arc additive manufacturing

Wire Arc Additive Manufactured Mild Steel and Austenitic Stainless Steel Components: Microstructure, Mechanical Properties and Residual Stresses

Effect of wire arc additive manufacturing parameters on geometric, hardness, and microstructure of 316LSi stainless steel preforms

Tailoring material microstructure and property in wire-laser directed energy deposition through a wiggle deposition strategy

Optimization of gas metal arc welding parameters for dissimilar steel welds: A case study on duplex stainless steel 2205 and stainless steel 316L

Investigations and Multi-response Optimization of Wire Arc Additive Manufacturing Cold Metal Transfer Process Parameters for Fabrication of SS308L Samples

Study on Heat Input Effect of 316L Stainless Steel Thin-Walled Parts Processed by Wire Arc Additive Manufacturing

Effect of Process Conditions on Mechanical and Metallurgical Properties of Wire Arc Additively Manufactured 316L Stainless Steel

Pulsed directed energy deposition-arc technology for depositing stainless steel 309L: Microstructural, elements distribution, and mechanical characteristics

Characterization of Functionally Graded Material (Stainless Steel 347/308L) Fabricated through Wire and Arc Additive Manufacturing: Microstructure and Mechanical Perspectives

Effects of arc current and travel speed on the processing of stainless steel via wire arc additive manufacturing (WAAM) process