Abstract:Graphene-coated SiC nanoparticles containing graphene floating bands (SiC@G) were prepared by a liquid-phase laser irradiation technique, and SiC@G nanoparticles with high dispersivity were incorporated into an Al2O3 matrix. An Al2O3-based composite ceramic tool was prepared by spark plasma sintering (SPS), and the effects of SiC@G nanoparticles on the mechanical and cutting properties and microstructure of the materials were further investigated. Analysis of the cross-sectional morphology shows that SiC@G nanoparticles containing graphene floating bands were homogeneously dispersed in the composite, which resulted in tighter bonds between the Al2O3 particles. This particular core-shell structure increased the contact area between the graphene and the matrix due to the formation of a graphene 3D mesh by extrusion, which enhanced the difficulty of relative sliding of graphene. Second, this special core-shell structure also made the crack propagation path more tortuous, further increasing the energy consumed in the fracture process, which is conducive to improving the mechanical properties of ceramic tools. The addition of SiC@G nanoparticles improves the mechanical properties of Al2O3-based composite ceramic tools. The fracture toughness (7.2 Mpa·m1/2) and flexural strength (709 MPa) increased by 75.6% and 28.7%, respectively. Cutting experiments with Al2O3/SiC/G composite ceramic tool and Al2O3/SiC@G composite ceramic tools on 40Cr hardened steel were performed. The results prove that the addition of SiC@G nanoparticles improves the cutting life by 18.1% and reduces the cutting force and friction coefficient by 6.3% and 14.8%, respectively.

Synthesis and properties characterization of an Al2O3-based ceramic materials with intragranular self-lubricating nanostructure

Mechanical property and cutting performance of (W,Ti)C based ceramic composites with the addition of nano-sized CaF2

Preparation of Al2O3/Ti(C,N)/ZrO2/CaF2@Al(OH)3 Ceramic Tools and Cutting Performance in Turning

Fibrous Monolithic Ceramic with a Single Alumina Phase: Fracture and High‐temperature Tribological Behaviors

Wear Behavior and Self Tribofilm Formation of Hot-Pressed Al2O3/TiC/CaF2 Ceramic Composites Sliding Against Cemented Carbide

Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material

Self-lubricating ceramic tool materials synergistically toughened by nano-coated particles and silicon carbide whiskers

Fabrication and Mechanical Properties of Al2O3-SiCw-TiCnp Ceramic Tool Material

Design, optimization, and verification of self‐lubricating ceramic tool microstructure by MC method

Self-lubricating Behaviours of Ceramic Tools in Dry Cutting

Friction and wear behaviors of Al 2 O 3 /TiC micro-nano-composite ceramic sliding against metals and hard materials

Alumina ceramic tool material with enhanced properties through the addition of bionic prepared nano SiC@graphene

Addition of Nano CaF2@SiO2 and SiC Whiskers in Ceramic Tools for Wear Reduction and Improved Machinability

Microstructure and performance optimization of Al2O3/TiC/TiB2/h-BN@Al2O3 self-lubricating ceramic tool materials

Strong, Tough and High Temperature Self-Lubricated Fibrous Monolithic Ceramic in Al2O3/Cr2O3 System

Synergistic Reinforcement of Si3N4 Based Ceramics Fabricated via Multiphase Strengthening under Low Temperature and Short Holding Time

Cutting Performance and Crack Self-Healing Mechanism of a Novel Ceramic Cutting Tool in Dry and High-Speed Machining of Inconel 718

Optimization of sintering parameters for fabrication of Al2O3/TiN/TiC micro-nano-composite ceramic tool material based on microstructure evolution simulation

Friction and wear behavior of Ti(C,N) self-lubricating cermet materials with multilayer core-shell microstructure

Unlubricated Friction and Wear Behaviors of Al2O3/TiC Ceramic Cutting Tool Materials from High Temperature Tribological Tests

High-Pressure synthesis of Al2O3-cBN-hBN Self-lubricating ceramic