Abstract:Abstract As offshore pipeline projects have expanded to deeper water regions with depths of more than 2 000 m, higher resistance against collapse by external pressure is now required in linepipe. Collapse resistance is mainly controlled by the pipe geometry and compressive yield strength. In UOE pipe, the compressive yield strength along the circumferential direction changes dramatically due to tensile pre-strain that occurs in pipe forming processes such as the expansion process. In order to improve the compressive yield strength of pipes, it is important to consider the Bauschinger effect caused by pipe expansion. As the mechanism of this effect, it is understood that internal stress is generated by the accumulation of dislocations, and this reduces reverse flow stress. Compressive yield strength is also changed by the thermal cycle associated with application of fusion-bond epoxy in pipe anti-corrosion coating by induction heating. In the typical thermal heat cycle of this coating process, the maximum heating temperature is from 200 °C to 250 °C. In this case, compressive yield strength increases as an effect of the thermal cycle, resulting in increased collapse resistance. Thus, for deep water application of UEO linepipe, it is important to clarify the conflicting effects of the Bauschinger effect and the thermal heat cycle on compressive yield strength. During installation of deep water pipelines by a method such as J-lay, curvature is imposed on the pipe axis, but the circumferential bending that leads to ovalization is determined by the interaction of the curvature of bending deformation. This bending deformation decreases collapse resistance. The interaction of external pressure and bending is also important when evaluating collapse. Against this background, this study discusses the collapse criteria for coated linepipe and their bending interaction against collapse based on a full-scale collapse test under external pressure with and without bending loading. The effect of the thermal heat cycle on linepipe collapse criteria is also discussed based on the results of tensile pre-strain tests with simulation of the thermal cycle and a collapse calculation by FEA.

Flexural buckling behaviour and design of offshore lined pipes under compression

Testing, simulation and design of offshore lined pipes under axial compression

Interaction Behavior Between Outer Pipe and Liner Within Offshore Lined Pipeline under Axial Compression

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Testing, simulation, and design for analyzing the behavior of lined pipes under torsion

A study of the ultimate compressive strain of local buckling in strain-based design of pipelines

Buckle Propagation of Sandwich Pipes under External Pressure

Analytical Study on Lateral Buckling of Lined Pipes under High Temperature and High Pressure

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Local buckling of deepwater oil-gas pipeline under high hydrostatic pressure

Bending Capacity of Corroded Pipeline Subjected to Internal Pressure and Axial Loadings

Experimental, Numerical, and Analytical Studies on the Bending of Mechanically Lined Pipe

Analytical and numerical buckling of bi-material pipelines reinforced by novel composite polyhedral linings

Buckling Behavior of Thin-Walled Stainless-Steel Lining Wrapped in Water-Supply Pipe under Negative Pressure

Collapse Resistance Under Combined External Pressure and Bending Deformation of Coated Linepipe

Asymmetric buckling of offshore pipelines under combined tension, bending and external pressure

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Systematic schemes for buckling analyses of a subsea bio-inspired non-circular FGM polyhedral liner with an arch invert