Abstract:A completely autotrophic nitrogen removal over nitrite (CANON) reactor was established by seeding ordinary activated sludge with reject water as the influent at (30±3)℃ from a sewage treatment plant in Qingdao. To solve bacterial loss and optimize reactor performance, a suspension of biological carriers was added to the CANON reactor. The result showed that the reactor was successfully started 130 days later. The total nitrogen removal load was up to 0.03 kg·(m3·d)-1, and the average variation ratio of nitrate and ammonia (RNaA) was 0.09, which was close to theoretical value 0.11. The CANON active sludge reactor ran for 300 days. During the stable operation period, the total nitrogen removal rate was stable at 0.20 kg·(m3·d)-1. Red granular sludge was mixed with the effluent of the system, and the particle size of granular sludge was between 1 and 3 mm. The suspension carriers were added to the CANON reactor with a filling rate of 30%. The fillers added to the moving bed biofilm reactor (MBBR) were mature fillers in the nitrifying reactor of the laboratory. The accumulation rate of nitrification was greater than 95%, and the ammonia-oxidized surface load reached 2.0 g·(m2·d)-1. After 30 days of operation and culturing, the system was successfully converted to a pure membrane system, and the biofilm on the surface of the carrier turned pale red. The total nitrogen removal load was up to 0.17 kg·(m3·d)-1. The average RNaA was 0.14, which was slightly higher than the theoretical value of 0.11. This suggested that the CANON sludge adapted to the environment in the MBBR and began to enter a stable stage. The CANON-MBBR ran for 200 days. During the stable operation period, the total nitrogen removal rate was stable at 1.15 kg·(m3·d)-1. The biofilm was bright brick red with a thickness of 150-250 μm. MLSS and MLVSS on the carriers were approximately 10200 mg·m-2 and 9000 mg·m-2, respectively, and the total biomass in the system was approximately 1.5 kg. Through high-throughput sequencing, AOB and AnAOB were found to be the dominant bacteria species on the suspension carrier, with a relative abundance of 26.24% and 30.08%, respectively, and nitrate oxidizing bacteria were successfully suppressed. The above results showed that CANON-MBBR with high-density polyethylene filler as the suspension carrier had good nitrogen-removal efficiency and was conducive to the stable operation of the autotrophic nitrogen removal process.

Performance of a continuous micro-oxygen up-flow sludge bed reactor for assimilation of partial nitrification/anammox sludge into a CANON granular-floc system

Sludge granulation and microbial activity in a stable CANON process by DO controlling and operating parameter optimization

[Effect of Intermediate-Setting Aeration on the CANON Granular Sludge Process in the AUSB Reactor]

[Analysis of Rapid Start-up and Mixed Nutritional Nitrogen Removal Performance of Complete Autotrophic Granular Sludge].

The rapid start-up of CANON process through adding partial nitration sludge to ANAMMOX system

One-step start-up and subsequent operation of CANON process in a fixed-bed reactor by inoculating mixture of partial nitrification and Anammox sludge

[Start-up and Performance Optimization of a CANON Pilot Reactor]

The rapid start-up of CANON process through adding partial nitration sludge to ANAMMOX system.

Enhancing the in-situ enrichment of anammox bacteria in aerobic granules to achieve high-rate CANON at low temperatures

Performance of A Nitrifying Airlift Reactor Using Granular Sludge

Comparing the nitrogen removal performance and microbial communities of flocs-granules hybrid and granule-based CANON systems

Performance and influence factors of completely autotrophic nitrogen removal over nitrite (CANON) process in a biofilter packed with volcanic rocks

Start-up and nitrogen removal performance of CANON and SNAD processes in a pilot-scale oxidation ditch reactor

One-stage partial nitrification/anammox system with short sludge retention time and low mixed liquor suspended solids long-term control: Establishment, performance and sludge characteristics

Shift in microorganism and functional gene abundance during completely autotrophic nitrogen removal over nitrite (CANON) process

Enrichment of Anammox from Activated Sludge and Its Application in the CANON Process

[Start-up and Stable Operation of CANON Coupled with Denitrifying Phosphorus Removal]

Modeling granule-based completely autotrophic nitrogen removal over the nitrite (CANON) process in an SBR

Performance of Partial Nitritation - Microfiltration-Anammox (PN-MF-A) Process with Enhanced System Stability Via In-Between Membrane Filtration for Sludge Anaerobic Reject Water Treatment

[Rapid Start-up of Continuous Autotrophic Nitrogen Removal Reactor by Hybrid-inoculating PN and PN/A Granular Sludges]

[Nitrogen Removal Performance of Novel HABR Reactor over CANON Process].