Abstract:A completely autotrophic nitrogen removal over nitrite (CANON) reactor was established by seeding ordinary activated sludge with reject water as the influent at (30±3)℃ from a sewage treatment plant in Qingdao. To solve bacterial loss and optimize reactor performance, a suspension of biological carriers was added to the CANON reactor. The result showed that the reactor was successfully started 130 days later. The total nitrogen removal load was up to 0.03 kg·(m3·d)-1, and the average variation ratio of nitrate and ammonia (RNaA) was 0.09, which was close to theoretical value 0.11. The CANON active sludge reactor ran for 300 days. During the stable operation period, the total nitrogen removal rate was stable at 0.20 kg·(m3·d)-1. Red granular sludge was mixed with the effluent of the system, and the particle size of granular sludge was between 1 and 3 mm. The suspension carriers were added to the CANON reactor with a filling rate of 30%. The fillers added to the moving bed biofilm reactor (MBBR) were mature fillers in the nitrifying reactor of the laboratory. The accumulation rate of nitrification was greater than 95%, and the ammonia-oxidized surface load reached 2.0 g·(m2·d)-1. After 30 days of operation and culturing, the system was successfully converted to a pure membrane system, and the biofilm on the surface of the carrier turned pale red. The total nitrogen removal load was up to 0.17 kg·(m3·d)-1. The average RNaA was 0.14, which was slightly higher than the theoretical value of 0.11. This suggested that the CANON sludge adapted to the environment in the MBBR and began to enter a stable stage. The CANON-MBBR ran for 200 days. During the stable operation period, the total nitrogen removal rate was stable at 1.15 kg·(m3·d)-1. The biofilm was bright brick red with a thickness of 150-250 μm. MLSS and MLVSS on the carriers were approximately 10200 mg·m-2 and 9000 mg·m-2, respectively, and the total biomass in the system was approximately 1.5 kg. Through high-throughput sequencing, AOB and AnAOB were found to be the dominant bacteria species on the suspension carrier, with a relative abundance of 26.24% and 30.08%, respectively, and nitrate oxidizing bacteria were successfully suppressed. The above results showed that CANON-MBBR with high-density polyethylene filler as the suspension carrier had good nitrogen-removal efficiency and was conducive to the stable operation of the autotrophic nitrogen removal process.

[Effect of Intermediate-Setting Aeration on the CANON Granular Sludge Process in the AUSB Reactor]

Development of continuous flow CANON process in the middle-setting aerated AUSB reactor

Performance of a continuous micro-oxygen up-flow sludge bed reactor for assimilation of partial nitrification/anammox sludge into a CANON granular-floc system

[Start-Up of Combined Floc-granule CANON Process and the Effects of SRT on Reactor Performance].

Start-up and Denitrification Performance Analysis of CANON Process in a Continuous Flow Reactor

Staet-up of Combined Floc-geanule CANON Peocess and the Effects of SRT on Reactoe Peefoemance

Effect of Aeration Density on Start-up of CANON Process

Start-up of Granule CANON Process and the Strategy for Enhancing Total Nitrogen Removal Rate

Sludge granulation and microbial activity in a stable CANON process by DO controlling and operating parameter optimization

Effect of influent ammonia concentration on CANON process for two sludge systems

[Effect of Organic Carbon Source on Start-up and Operation of the CANON Granular Sludge Process].

Sludge Ratio Affects the Start-Up Performance and Functional Bacteria Distribution of a Hybrid CANON System.

Inoculation of ANAMMOX Sludge for Ultra-Fast Start-Up of CANON Process and Performance Optimization

[Analysis of Rapid Start-up and Mixed Nutritional Nitrogen Removal Performance of Complete Autotrophic Granular Sludge].

Achieving High Performance Completely Autotrophic Nitrogen Removal in a Continuous Granular Sludge Reactor

The rapid start-up of CANON process through adding partial nitration sludge to ANAMMOX system

Enhancing the in-situ enrichment of anammox bacteria in aerobic granules to achieve high-rate CANON at low temperatures

Performance of High-Loaded Anammox Uasb Reactors Containing Granular Sludge

Effect of Anammox Granular Sludge Type on the CANON Process with Immobilized Fillers Treating Domestic Wastewater

Performance and sludge characteristics of the CANON process

[Start-up and Performance Optimization of a CANON Pilot Reactor]