Abstract:To mitigate the shuttle effect of Li–S batteries, a hollow microflower Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The H‐Mo2C/MoO2/nitrogen‐doped carbon/S cathode with the high‐sulfur loading of 6.2 mg cm−2 and a low‐electrolyte/sulfur ratio of at 1C, where the cell exhibits an excellent cycling stability, maintains a capacity of 308 mAh g−1 after 500 cycles. Lithium–sulfur batteries (Li–S batteries) have a high theoretical capacity density. However, due to the solubility of long‐chain polysulfides migration between the positive and negative electrodes driven by concentration gradients, the cycle stability of lithium–sulfur batteries is compromised, hindering their practical application. To mitigate the shuttle effect and enhance the electrochemical performance of Li–S batteries, a hollow microflower (MF) Mo2C/MoO2 heterostructure is synthesized using a two‐step calcining method. The presence of a hetero‐interface improves the electrical conduction rate, facilitating more effective charge transfer at the interface between heterogeneous components. Additionally, the increased catalytic active sites enhance the conversion of polysulfides and promote the catalytic capability. As a result, Li–S batteries with H‐Mo2C/MoO2/nitrogen‐doped carbon MFs as additives in the cathode exhibit excellent rate performance and good cycling stability. After 100 cycles at 0.2C, the capacity remains at 1071.6 mAh g−1, with a capacity retention rate of 90.6%. Notably, the Li–S batteries demonstrate a capacity decay of only 0.011% per cycle over 1000 cycles at 1C, with a specific capacity of 790 mAh g−1 retained after the cycling process. In this work, a rational approach is provided to fabricating transition‐metal carbon‐oxide heterostructures with an optimized structure to enhance the performance of Li–S batteries.

VS 4 /MoS 2 heterostructures grown along graphene to boost reaction kinetics and reversibility for high performance lithium-sulfur batteries

MoS 2 Nanosphere-Decorated Reduced Graphene Oxide to Promote Catalytic Activity for High-Performance Lithium–Sulfur Batteries

The Structural and Electronic Engineering of Molybdenum Disulfide Nanosheets as Carbon‐Free Sulfur Hosts for Boosting Energy Density and Cycling Life of Lithium–Sulfur Batteries

In-situ constructed three-dimensional MoS2–MoN heterostructure as the cathode of lithium–sulfur battery

Synergistic electrocatalysis of polysulfides by a nanostructured VS4-carbon nanofiber functional separator for high-performance lithium–sulfur batteries

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Synergistic improving sulfur reduction reaction by VS 4 embedded N-doped carbon fiber composite host towards practicable lithium sulfur batteries

Constructing MoS 2 -SnS heterostructures on N-doped carbon nanosheets for enhanced catalytic conversion of polysulfides in lithium-sulfur batteries

Facile Synthesis of Heterostructured MoS 2 –MoO 3 Nanosheets with Active Electrocatalytic Sites for High-Performance Lithium–Sulfur Batteries

A Bifunctional N-doped Carbon Nanosheet Embedded with VN/Mo2C Heterointerfaces Electrocatalyst for Expediting Sulfur Redox and Lithium Regulation Toward Advanced Li-S Battery

Insight into MoS2–MoN Heterostructure to Accelerate Polysulfide Conversion Toward High‐Energy‐Density Lithium–Sulfur Batteries

Rational design of hollow flower-like MoS2/Mo2C heterostructures in N-doped carbon substrate for synergistically accelerating adsorption-electrocatalysis of polysulfides in lithium sulfur batteries

Bifunctional Atomically Dispersed Mo-N2/C Nanosheets Boost Lithium Sulfide Deposition/Decomposition for Stable Lithium-Sulfur Batteries.

Sulfur-deficient MoS2-carbon hollow nanospheres for synergistic trapping and electrocatalytic conversion of polysulfides

Multifunctional V 3 S 4 -Nanowire/graphene Composites for High Performance Li-S Batteries

Synergistic Polysulfides Adsorption–Conversion with Mo2C–MoO2 Heterostructure for Kinetically Enhanced Lithium–Sulfur Battery

Covalent Coupled Sulfur-Deficient MoS2 Nanosheets on Carbon Nanotubes toward Polysulfide Catalytic Conversion in a Lithium Sulfur Battery

Covalent Coupled Sulfur-Deficient MoS 2 Nanosheets on Carbon Nanotubes toward Polysulfide Catalytic Conversion in a Lithium Sulfur Battery

Heterostructure Mo2C/α-MoO3/G Catalyst Based Heterogeneous Catalysis/deposition Mechanism for High-Performance Li-S Battery

In situ enhance lithium polysulfides redox kinetics by carbon cloth/MoO3 self-standing electrode for lithium–sulfur battery

A MnO2/Graphene Oxide/Multi-Walled Carbon Nanotubes-Sulfur Composite with Dual-Efficient Polysulfide Adsorption for Improving Lithium-Sulfur Batteries