Abstract:In state-of-the-art lithium ion batteries, separators (microporous membranes) play a passive yet critical role – hosting liquid electrolyte and maintaining physical separation of the electrodes. However, as the demands on lithium ion batteries increase, with an emphasis on greater energy density, longevity (cycle/calendar life), and safety, engineering separators to take a on more active role in the cell (electro)chemistry is expected to be an important strategy. Myriad membrane materials and separator designs have been developed to impart additional functionality, for example, acid and/or transition metal scavenging, temperature responsiveness, enhanced thermal stability, increased ion dissociation, combustion suppression, and mechanical strength. In this talk, I will preset my group's approach to additive manufacturing of next-generation lithium ion battery separators. Our approach is based on polymerization induced phase separation (PIPS), wherein polymerizable monomers (or prepolymer resins) are mixed with porogen. Through rapid, low-cost, readily scalable photopolymerization, the monomers are converted to a crosslinked polymer network, which results in the porogen becoming immiscible and phase separating through spinodal decomposition. By tuning the thermodynamics of the polymer-porogen mixture and photopolymerization kinetics, the porosity and pore size of the resulting polymeric phase can be tuned. We have shown that ethylene carbonate (EC) mixed with common acrylate monomers, such as 1,4-butanediol diacrylate, is an effective porogen. Most importantly because EC is an indispensable component in liquid electrolytes, it does not need to be extracted from the separator prior to incorporation into the electrochemical cell. By controlling the ratio of the 1,4-butanediol diacrylate (BDDA) monomer to EC, monolithic microporous membranes are readily prepared with 25 μm thickness and pore sizes and porosities ranging from 6.8 to 22nm and 15.4% to 38.54%, respectively. The optimal poly(1,4-butanediol diacrylate) (pBDDA) separator has a porosity of 38.5% and average pore size of 22 nm; uptakes 127% liquid electrolyte by mass, and has an ionic conductivity of 1.98 mS/cm, which is higher than that of Celgard 2500. Lithium ion battery half cells consisting of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathodes and pBDDA separators were shown to undergo reversible charge/discharge cycling with an average discharge capacity of 142 mAh/g and a capacity retention of 98.4% over 100 cycles - comparable to cells using state-of-the-art separators. Furthermore, the pBDDA separators were shown to be thermally stable to 400°C, lack low temperature thermal transitions that can compromise cell safety, and exhibits no thermal shrinkage up to 150°C. I will also discuss my group's efforts to engineer separators with additional functionality to improve cell performance under abuse conditions.

Investigating the Role of a P(VDF−TrFE) Ferroelectric Separator in Li‐Metal Pouch Cells using Electrochemical Impedance Spectroscopy

A polymeric separator membrane with chemoresistance and high Li-ion flux for high-energy-density lithium metal batteries

Ion Flux Regulation through PTFE Nanospheres Impregnated in Glass Fiber Separators for Long‐Lived Lithium and Sodium Metal Batteries

Preparation and Properties of Poly (vinylidene Fluoride)/poly(dimethylsiloxane) Graft (poly(propylene Oxide)-Block-poly(ethylene Oxide)) Blend Porous Separators and Corresponding Electrolytes

Poly(Vinylidene Fluoride) Separators with Dual-Asymmetric Structure for High-Performance Lithium Ion Batteries

A novel Nafion‐Functionalized Polyethersulfone(PES)‐based ion‐permselective separator for high performance Li‐O2 batteries using LiI as a redox mediator

Precise Control of Li+ Directed Transport Via Electronegative Polymer Brushes on Polyolefin Separators for Dendrite‐Free Lithium Deposition

Enhancing Interfacial Lithiophilicity and Stability with PVDF/In(NO3)3 Composite Separators for Durable Lithium Metal Anodes

Uniform Poly(vinyl ethylene carbonate) based metal-organic framework separator for smooth lithium-ion electrodeposition

A single‐layer piezoelectric composite separator for durable operation of Li metal anode at high rates

Facile Polymer of Intrinsic Microporosity-Modified Separator with Quite-Low Loading for Enhanced-Performance Lithium Metal Batteries

Eliminating Hydrogen Fluoride through Piperidine-Doped Separators for Stable Li Metal Batteries with Nickel-Rich Cathodes

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Regulating Li ions transportation and deposition with Polydopamine/Polyethyleneimine Functional Separator for Superior Li Metal Battery

(Invited) Multifunctional Lithium Ion Battery Separators through Polymerization-Induced Phase Separation

Highly multiscale structural Poly(vinylidene fluoridehexafluoropropylene) / poly-m-phenyleneisophthalamide separator with enhanced interface compatibility and uniform lithium-ion flux distribution for dendrite-proof lithium-metal batteries

On the Use of Recycled PVB to Develop Sustainable Separators for Greener Li‐Ion Batteries

Highly thermostable expanded polytetrafluoroethylene separator with mussel-inspired silica coating for advanced Li-ion batteries

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

Multiple uniform lithium-ion transport channels in Li6.4La3Zr1.4Ta0.6O12/Ce(OH)3 modified polypropylene composite separator for high-performance lithium metal batteries

Metal‐Organic Framework Sandwiching Porous Super‐Engineering Polymeric Membranes as Anionphilic Separators for Dendrite‐free Lithium Metal Batteries