Abstract:TiO2 is the most photoactive material because of its superstrong photooxidizing ability, and TiO2 photocatalysis has been widely applied in sustainable water treatment and environmental remediation. However, poor sunlight or visible-light harvesting efficiency and fast recombination rate of the photogenerated charge carriers severely limit the practical applications of TiO2. To overcome these problems, the present work demonstrates a facile in-situ co-condensation method combined with hydrothermal treatment to prepare a series of graphitized carbon/TiO2 composite photocatalysts, and anatase TiO2 phase and pi-pi-conjugated polycyclic aromatic carbon structure are created simultaneously. As-prepared TiO2/C composites exhibit remarkably high visible-light photocatalytic activity in the degradation of aqueous emerging phenolic pollutants, acetaminophen (APAP) and methylparaben (MPB), and apparent rate constant of the TiO2/C composite with carbon doping level of 10.3% for APAP and MPB removal is 7.6 and 2.8 times higher than that of bare TiO2, and 6.2 and 2.6 times higher than that of Degussa P25 TiO2. Based on the results of photoelectrochemical experiments, indirect chemical probe measurements, and ESR spectroscopy, it is verified that doping TiO2 with graphitized carbon is responsible for this enhanced photocatalytic activity, which renders the improved visible-light harvesting ability, the accelerated separation of the photogenerated charge carriers, and enlarged BET surface areas. Through analyzing the intermediates yielded in the photodegradation process, the pathway of visible-light photocatalytic degradation of APAP and MPB over the TiO2/C composite is proposed. (c) 2020, Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Intrinsic kinetic model with variable light intensity of the emerging pollutants degradation in a photocatalytic differential reactor with immobilized TIO2: Experiments and CFD

In-situ route for the graphitized carbon/TiO<sub>2</sub> composite photocatalysts with enhanced removal efficiency to emerging phenolic pollutants

Kinetic modeling of the photocatalytic degradation of acetaminophen and its main transformation products

Multivariate modeling of intrinsic kinetics for gas-solid heterogeneous photocatalytic reaction: A general method for different pollutant-photocatalyst systems

Modeling TiO 2 /UV–vis bacterial inactivation: Useful tools for reactor optimization and design

Numerical Simulation of a UV-PCO Plate Reactor

[Kinetics Model for Photo-Catalytic Degradation of Rodamine B with TiO2 /sio2 As Catalyst].

Kinetic Modeling for the Deactivation of TiO2 During the Photocatalytic Removal of Low Concentration SO2

Kinetic and reaction mechanism of generated by-products in a photocatalytic oxidation reactor: Model development and validation

A “deactivation” Kinetic Model for Predicting the Performance of Photocatalytic Degradation of Indoor Toluene, O-Xylene, and Benzene

Experimental and numerical study of photocatalysis in Taylor photoreactors with carbon-quantum-dots/BiOCl as catalysts

CFD Modeling of a UV-LED Photocatalytic Odor Abatement Process in a Continuous Reactor.

A New Kinetic Model for Predicting the Rate of Ultraviolet Photocatalytic Oxidation of Toluene in the Gas-phase

Study of bioaerosol disinfection kinetics and application of nonlinear regression modeling for optimization of TiO2-based photocatalytic disinfection process

Reaction kinetics formulation with explicit radiation absorption effects of the photo-Fenton degradation of paracetamol under natural pH conditions

Modeling of Catalyst Deactivation in Humic Acid Degradation

Mathematical Model of Dye Wastewater Treatment with Thin Film Photoelectrocatalytic Reactors

Dispersed plug flow photocatalytic reactor using TiO2‐coated foams, 2D modeling, and experimental operating mode

Microreactor modeling for green photocatalytic degradation of water contaminants

Kinetic Study and Modeling on Photocatalytic Degradation of Para-Chlorobenzoate at Different Light Intensities

CFD Modeling of UV/H2O2 Process in Internal Airlift Circulating Photoreactor