Abstract:We have demonstrated an anisotropic bulk SmFe12-based sintered magnet with sufficiently large coercivity of μ0Hc=1.0 T and a remanence ratio (Mr/Ms) of 0.84 using conventional liquid sintering process of nitrogen jet-milled powders with the nominal composition of Sm8Fe73.5Ti8V8Ga0.5Al2 (at.%). The moderate saturation magnetization of μ0Ms =0.74 T is due to the dissolution of a large amount of stabilizing elements, Ti, V, and Al, in the 1:12 phase. The anisotropy field of the main 1:12 phase was determined to be µ0HA=10.2 T. Detailed multi-scale microstructure characterizations by scanning electron microscope (SEM) and scanning transmission electron microscope (STEM) showed the magnet consists of Sm(Fe,Ti,V,Al)12 grains with the ThMn12-type crystal structure with a size distribution of ∼3−15µm that are enveloped by ∼3 nm thick Sm-rich amorphous intergranular phase. Secondary phases including metallic (Sm,Ga)-rich, SmOx, and Fe2(Ti,V) phases coexist with the 1:12 phase. Measured angular dependence of coercivity follows Kondorsky type magnetization reversal, suggesting the coercivity arises due to the pining of magnetic domain walls. Magneto-optical Kerr effect (MOKE) microscopy revealed magnetization reversal starts at the grain boundaries and interphase interfaces and thin amorphous intergranular phases act as the pinning sites against magnetic domain wall propagation. Small micromagnetic parameter α∼0.164 estimated by fitting to the Kronmüllar equation suggest that the reduction of the grain size and engineering of the intergranular phase to an Fe-lean composition are necessary to improve the coercivity toward µ0HA/3=3.4 T. This work provides guidelines on an optimum microstructure to develop an anisotropic bulk SmFe12-based sintered magnet with a sufficiently large coercivity.

The dependence of coercivity on anisotropy field in sintered R-Fe-B permanent magnets

Most frequently asked questions about the coercivity of Nd-Fe-B permanent magnets

Temperature stability of coercivity in mischmetal-Fe-Co-B melt-spun ribbons

Origin of coercivity in an anisotropic Sm(Fe,Ti,V)12-based sintered magnet

Anisotropy of exchange stiffness based on atomic-scale magnetic properties in rare-earth permanent magnet Nd$_2$Fe$_{14}$B

First-principles study of permanent magnets

Microstructure and extrinsic magnetic properties of anisotropic Sm(Fe,Ti,V)12-based sintered magnets

First-principles calculations of magnetic properties for analysis of magnetization processes in rare-earth permanent magnets

A comparative study of Nd15Fe78B7 and Nd15Co78B7 systems: phase formations and coercivity mechanisms

Angular dependence and thermal stability of coercivity of Nd-rich Ga-doped Nd–Fe–B sintered magnet

Influence of Co substitution for Fe on the magnetic properties of nanocrystalline (Nd,Pr)-Fe-B based alloys

Atomic scale insights into the segregation/partitioning behaviour in as-sintered multi-main-phase Nd-Ce-Fe-B permanent magnets

Coercivity Enhancement of Low Rare Earth Nd–Fe–B Sintered Magnets by Optimizing Microstructure

Intrinsic Magnetic Hardness of R2(Fe1−xMnx)14B

Properties and analysis of coercivity mechanism of NdFeB nanocrystalline magnetic alloys

Hard magnet coercivity

Thermal Fluctuation Field in Ndfeb Permanent-Magnets

Robustness of magnetocrystalline anisotropy and coercivity in Fe–Co–B

Temperature-dependent magnetocrystalline anisotropy of rare earth/transition metal permanent magnets from first principles: The light RCo$_5$ (R=Y, La-Gd) intermetallics

Origin of low coercivity of high La–Ce-containing Nd–Fe–B sintered magnets

Study of the Coercivity of Pr(Mo, Fe)12Nx