Abstract:The coupling of large telescopes to astronomical instruments has historically been challenging due to the tension between instrument throughput and stability. Light from the telescope can either be injected wholesale into the instrument, maintaining high throughput at the cost of point-spread function (PSF) stability, or the time-varying components of the light can be filtered out with single-mode fibers (SMFs), maintaining instrument stability at the cost of light loss. Today, the field of astrophotonics provides a potential resolution to the throughput- stability tension in the form of the photonic lantern (PL): a tapered waveguide which can couple a time-varying and aberrated PSF into multiple diffraction-limited beams at an efficiency that greatly surpasses direct SMF injection. As a result, lantern-fed instruments retain the stability of SMF-fed instruments while increasing their throughput. To this end, we present a series of numerical simulations characterizing PL performance as a function of lantern geometry, wavelength, and wavefront error (WFE), aimed at guiding the design of future diffraction-limited spectrometers. These characterizations include a first look at the interaction between PLs and phase-induced amplitude apodization (PIAA) optics. We find that Gaussian-mapping beam-shaping optics can enhance coupling into 3-port lanterns but offer diminishing gains with larger lanterns. In the y- and J - band (0.97–1.35 µm) region, with moderately high WFE (∼ 10% Strehl ratio), a 3-port lantern in conjunction with beam-shaping optics strikes a good balance between pixel count and throughput gains. If pixels are not a constraint, and the flux in each port will be dominated by photon noise, then larger port count lanterns will provide further coupling gains due to a greater resilience to tip-tilt errors. Finally, we show that lanterns can maintain high operating efficiencies over large wavelength bands where the number of guided modes at the lantern entrance drops, if care is taken to minimize the attenuation of weakly radiative input modes.

Modal noise in an integrated photonic lantern fed diffraction-limited spectrograph

Integrated photonic building blocks for next-generation astronomical instrumentation II: the multimode to single mode transition

Design considerations of photonic lanterns for diffraction-limited spectrometry

Mitigating Modal Noise in Multimode Circular Fibres by Optical Agitation using a Galvanometer

Multiband processing of multimode light: combining 3D photonic lanterns with waveguide Bragg gratings

Fabrication and Characterization of Photonic Lanterns Using Coupled-Mode Theory

Demonstration of a photonic lantern low order wavefront sensor using an adaptive optics testbed

Mode-Selective Photonic Lanterns with Double-Clad Fibers

Spectral characterization of a 3-port photonic lantern for application to spectroastrometry

On the Potential of Spectroastrometry with Photonic Lanterns

Mode-Dependent Loss Equalized Few-Mode Fiber Photonic Lantern

'Modal-noise' in single-mode fibers: A cautionary note for high precision radial velocity instruments

Multicore fibre photonic lanterns for precision radial velocity science

Focal-plane wavefront sensing with photonic lanterns I: theoretical framework

Simulation and Optimization of an Astrophotonic Reformatter

Visible Photonic Lantern integration, characterization and on-sky testing on Subaru/SCExAO

Real-time experimental demonstrations of a photonic lantern wavefront sensor

Focal-plane wavefront sensing with photonic lanterns II: numerical characterization and optimization

Coherent Imaging with Photonic Lanterns

The mode detangler

Focal-ratio-degradation (FRD) mitigation in a multimode fiber link using mode-selective photonic lanterns