Abstract:The methanol transformation reaction in the presence of oxygen was carried out in the temperature range of 210-310 oC, over vanadium catalysts based on vanadium oxide (V 2 O 5 ) and on vanadium-phosphorus oxide (VPO) calcined at 450 oC in air. Specifically, the vanadium oxide systems with V 2 O 5 loadings below, above or corresponding to the theoretical monolayer (1-34 wt.% of V 2 O 5 ) were obtained by the impregnation of a mesoporous amorphous aluminum phosphate, AlPO 4 , calcined at different temperatures (from 350 oC to 650 oC) with vanadyl oxalate. Additionally, mechanical mixtures of either VPO or V 2 O 5 with AlPO 4 were also employed. Under the experimental conditions employed, with a methanol enriched feed (O 2 /methanol molar ratio=0.6), formaldehyde and dimethoxymethane were the main products obtained with all the catalysts studied. Vanadyl phosphate (VPO) exhibited slightly lower activity than vanadium oxide, formaldehyde being the main product (SFA ≥ 95%). The conversion of both vanadium oxide and vanadyl phosphate appreciably increased when mixed with the AlPO 4 , also promoting the formation of dimethoxymethane. The interaction of the vanadium species with the aluminum phosphate surface took place preferentially through the surface Al-OH groups, the vanadium species with less development being the most active in the formation of formaldehyde and dimethoxymethane, per at-g of vanadium.

Study on Transformed Iron-molybdenum Catalyst for Partial Oxidation of Methanol to Formaldehyde

Research on iron-molybdenum catalysts for methanol oxidation to formaldehyde

Selective Oxidation of Methanol to Dimethoxymethane over Iron and Vanadate Modified Phosphotungstate

Surface Structure and Activity of Iron Molybdate Catalyst for Methanol Oxidation to Formaldehyde

Electron microscopy studies relating to methanol oxidation over ferric molybdate and molybdenum trioxide catalysts

Process Improvements in Methanol Oxidation to Formaldehyde: Application and Catalyst Development

Operando XAS/XRD and Raman Spectroscopic Study of Structural Changes of the Iron Molybdate Catalyst during Selective Oxidation of Methanol

Iron and Molybdenum Modified Phosphotungstates Towards Selective Oxidation of Styrene to Benzaldehyde

Activity, Selectivity and Initial Degradation of Iron Molybdate in the Oxidative Dehydrogenation of Ethanol

Study on the Fe-Mo Catalyst for the Preparation of Formaldehyde by Methanol Oxidation

Highly Selective Oxidation of Methanol to Dimethoxymethane over So42-/V2o5-Zro2

A Review and Experimental Revisit of Alternative Catalysts for Selective Oxidation of Methanol to Formaldehyde

TPD–TGA and Calorimetric Study of the Partial Oxidation of Methanol on TiO2-Supported Vanadium Oxide

Comparative studies on direct conversion of methane to methanol/formaldehyde over La–Co–O and ZrO 2 supported molybdenum oxide catalysts

Highly Selective Oxidation of Methane to Methanol at Ambient Conditions by Titanium Dioxide-Supported Iron Species

Characterization and Catalytic Performance of Zr-Mo-Oxide Catalysts for Selective Oxidation of Methane to Formaldehyde

Preparation and effect of Mo-V-Cr-Bi-Si oxide catalysts on controlled oxidation of methane to methanol and formaldehyde

Selective oxidation of methanol to green oxygenates on vanadium-aluminum phosphate based catalysts

Ensemble Effects on Methanol Oxidation to Formaldehyde on Ferric Molybdate Catalysts

Preparation and Characterization of P–Mo–V Mixed Oxide-Incorporating Mesoporous Silica Catalysts for Selective Oxidation of Methane to Formaldehyde

A TPD study of the partial oxidation of methanol to formaldehyde on CeO2-supported vanadium oxide