Abstract:The B2 phase-containing Bulk Metallic Glass (BMG) composites, as a promising remedy to tackle the strain-softening and brittleness of BMGs, has been widely applied to enhance the work-hardening and plastic deformability. A novel strategy was proposed to select the composition of an alloy which effectively promotes the formation of B2–ZrCo phase. We designed and prepared six compositions and seven rod samples, and then analysed the precipitation of crystalline phase together with the mechanical properties. We found that the primary phases administrate the mechanical properties and the composition of an alloy determines the formation of crystalline phases. Also, the cooling rate cannot enhance the B2–ZrCo phase formation in as-cast Zr–Co–Al BMG composites. As a result, we found that the formation of a large quantity of glass matrix and only B2–ZrCo phase cannot be achieved simultaneously in as-cast Zr–Co–Al alloys. In order to resolve this issue, flash annealing has been introduced to solve this problem. Different compositions correspond to different critical heating rates and high heating rate usually aggravates the difficulty to achieve this aim. In order to reduce critical heating rate, the conventional annealing, which can be well controlled, was used to select the alloy composition and compare formation of the B2–ZrCo phase. And thus, an optimal composition of Zr–Co–Al alloy can be selected to produce the BMG composites incorporating the only B2–ZrCo phase via flash annealing. Therefore, we believe that this work provides a novel recipe to design the Zr–Co–Al BMG composites incorporating the only B2–ZrCo phase.

A novel type of core-shell structured secondary phase particles in Ge-addition modified Zircaloy-4 alloy subjected to β-phase region solution treatment

Core-shell structured nanoprecipitates in zirconium based alloy

Formation mechanism of composite secondary phase particles in a solution-treated Si-modified Zircaloy-4

Structurally modulated Zr(Fe,Cr)2 secondary phase particles in Zircaloy-4 alloy subjected to cyclic deformation at room temperature

Direct observation of Face-centered cubic zirconium phase growth-induced stacking faults in Zr3Ge secondary phase nanoparticle

Triangularly arranged needle-shaped precipitates in Ge containing zirconium alloy

Core–shell Double Phase Crystal in an Yttrium-Containing Zr-based Bulk Metallic Glass

Homogenization and Growth Behavior of Second-Phase Particles in a Deformed Zr–Sn–Nb–Fe–Cu–Si–O Alloy

A Novel Strategy to Design Zr–Co–Al BMG Composites Containing Only B2–ZrCo Phase

Formation of a Novel X Phase in Mg–Gd–Zn–Zr Alloy

The Core-Shell Structure of Al70bi11sn19 Immiscible Alloy Particles

Core‒rim structure, bi-solubility and a hierarchical phase relationship in hot-pressed ZrB2‒SiC‒MC ceramics (M=Nb, Hf, Ta, W)

Phase separation and formation of core-type microstructure of Al–65.5 mass% Bi immiscible alloys

Formation of core-shell-like structure in β-solidified TiAl alloy and its effect on hot workability

Heterogeneous nucleation of β-type precipitates on nanoscale Zr-rich particles in a Mg-6Zn-0.5Cu-0.6Zr alloy

Modification Mechanism And Growth Process Of Al-3(Sc, Zr) Particles In As-Cast Al-Si-Mg-Cu-Zr-Sc Alloy

New insight into prismatic-type face-centered cubic zirconium phase in pure zirconium

The formation mechanism of stacking faults in ZrFe2 Laves phase in Zircaloy-4 alloy

Characterization of Phases in a Mg–6Gd–4Sm–0.4Zr (wt.%) Alloy During Solution Treatment

Modelling amorphization and dissolution of Zr(Fe,Cr) 2 secondary phase precipitates in Zircaloys

Electron Backscatter Diffraction Analysis of Hydride-Containing Zirconium Alloys and Phase Analysis of the Second Phase Particles