Abstract:The increasing number of photovoltaic (PV) panels installed worldwide requires solutions for their disposal at their end-of-life. PV modules contain several valuable metals like copper and silver as well as toxic ones like lead used in solder. Another valuable component are silicon wafers, because of their high purity, which is obtained in energy and resource intensive production processes. Many recycling procedures, however, are downcycling processes that do not recover these components, but rather are based on shredding and landfilling the modules or obtaining only one of those materials. Often, nitric acid is used as leaching agent for the recovery of silver and copper resulting in harmful NO x emissions that necessitate additional gas treatment. We present an alternative electrochemical process by which leaching reagents are generated on boron-doped diamond electrodes as anode material, which are ideal for this task due to their high overpotential for the oxygen evolution reaction. By evaluating different electrolytes, sulfuric acid was found to be suitable by generating peroxydisulfate (S2O82−). With its standard redox potential of +2.0 V, it is possible to oxidize rather noble metals like silver. To evaluate the efficiency of the process S2O82− was generated from sulfuric acid in an H-cell setup and the leaching rate of copper, silver and tin was investigated and optimized by varying acid concentration and current density. Efficient leaching of all metals was achieved in 5 M sulfuric acid at 200 mA/cm2. The feasibility of the process for real waste streams was demonstrated by disassembling PV modules and leaching busbars and silver coatings from wafers. The complete removal of the metal coatings from the residual wafers was confirmed by EDX. A significant advantage of the process with S2O82− as leaching agent is, that the reaction with metals forms sulfate that can be oxidized again within a cyclic process driven by electricity as displayed in figure 1. Additionally, the metals can be recovered by electrowinning from the etching solution within the same cell. This was demonstrated by recovering Ag, Cu and Sn from sulfuric acid solution. By using potentiostatic conditions it was additionally possible to separate the metals by consecutively plating them in the order of their respective redox potentials. Leached metals from PV waste were recovered electrochemically with 99 % and 88 % yield for Cu and Ag, respectively. Sn could not be plated due to the high amounts of persulfate present in solution, however recovery by precipitation is possible. Pb is obtained as undissolved residue during leaching, due to the extremely low solubility of PbSO 4 and PbO 2 . Aside from the H-cell experiments the generation of S2O82− and electrowinning was successfully investigated in a flow cell setup. This system benefits from a significantly decreased cell voltage making the process more energy efficient and allows easier upscaling towards industrial applications. The presented process is energy efficient as both electrode reactions are utilized and furthermore does not require the continuous addition of chemicals, therefore, making it an eco-friendly and sustainable alternative to conventional recycling methods. Figure 1: Scheme for the cyclic process of peroxydisulfate generation, leaching and electrowinning during the electrochemical recycling of PV waste. Figure 1

Recycling rejected silicon wafers and dies for high grade PV cells

Monocrystalline Silicon Wafer Recovery Via Chemical Etching from End-of-Life Silicon Solar Panels for Solar Cell Application

Potential for Recycled Silicon Solar Cells as Feedstock for New Ingot Growth

Photovoltaic recycling: enhancing silicon wafer recovery process from damaged solar panels

A systematically integrated recycling and upgrading technology for waste crystalline silicon photovoltaic module

Manufacturing lithium-ion anodes from silicon recovered from end-of-life solar panels

LCA-Informed Approach for Lower Environmental Impact Recycling of Crystalline Silicon Solar Cells

Reshaping the Module: The Path to Comprehensive Photovoltaic Panel Recycling

A comprehensive hydrometallurgical recycling approach for the environmental impact mitigation of EoL solar cells

Pure Silicon Recovering from Photovoltaic Modules

Recycling waste crystalline-silicon solar cells: Application as high performance Si-based anode materials for lithium-ion batteries

Experimental, cost and waste analysis of recycling process for crystalline silicon solar module

Recycling of silicon solar panels through a salt-etching approach

An Electrochemical Process for the Recovery of Metals and High Purity Silicon from Photovoltaic Modules

Efficient and comprehensive recycling of valuable components from scrapped Si-based photovoltaic panels

Catalytic recovery of metals from end-of-life polycrystalline silicon photovoltaic cells: Experimental insights into silver recovery

An Integrated Thermal and Hydrometallurgical Process for the Recovery of Silicon and Silver from End-of-Life Crystalline Si Photovoltaic Panels

Development of eco-friendly pretreatment processes for high-purity silicon recovery from end-of-life photovoltaic modules

Experimental Methodology for the Separation Materials in the Recycling Process of Silicon Photovoltaic Panels

Advancing Sustainable End-of-Life Strategies for Photovoltaic Modules with Silicon Reclamation for Lithium-ion Battery Anodes

Photovoltaic solar panels of crystalline silicon: Characterization and separation