Abstract:An integrated plasma profile control strategy, ARTAEMIS, is being developed for extrapolating present-day advanced tokamak (AT) scenarios to steady-state operation. The approach is based on semi-empirical modelling and was initially explored on JET (Moreau et al 2008 Nucl. Fusion 48 106001). This paper deals with the general applicability of this strategy for simultaneous magnetic and kinetic control on various tokamaks. The determination of the device-specific, control-oriented models that are needed to compute optimal controller matrices for a given operation scenario is discussed. The methodology is generic and can be applied to any device, with different sets of heating and current drive actuators, controlled variables and profiles. The system identification algorithms take advantage of the large ratio between the magnetic and thermal diffusion time scales and have been recently applied to both JT-60U and DIII-D data. On JT-60U, an existing series of high bootstrap current (∼70%), 0.9 MA non-inductive AT discharges was used. The actuators consisted of four groups of neutral beam injectors aimed at perpendicular injection (on-axis and off-axis), and co-current tangential injection (also on-axis and off-axis). On DIII-D, dedicated system identification experiments were carried out in the loop voltage (V ext) control mode (as opposed to current control) to avoid feedback in the response data from the primary circuit. The reference plasma state was that of a 0.9 MA AT scenario which had been optimized to combine non-inductive current fractions near unity with 3.5 < βN < 3.9, bootstrap current fractions larger than 65% and H 98(y,2) = 1.5. Actuators other than V ext were co-current, counter-current and balanced neutral beam injection, and electron cyclotron current drive. Power and loop voltage modulations resulted in dynamic variations of the plasma current between 0.7 and 1.2 MA. It is concluded that the response of essential plasma parameter profiles to specific actuators of a given device can be satisfactorily identified from a small set of experiments. This provides, for control purposes, a readily available alternative to first-principles plasma modelling.

Empirical error field control at JET in preparation of ITER start-up

Error field detection and correction studies towards ITER operation

Plasma Models for Real-Time Control of Advanced Tokamak Scenarios

Error Field Predictability and Consequences for ITER

Non-disruptive error field measurement in DIII-D low safety factor plasmas and projection to ITER

System identification for plasma shape control on EAST

Investigation of intrinsic error fields in MAST-U device

Innovative dud detection based on JET DT experience

Error Field Feedback Control System in the Keda Torus Experiment and Open Loop Control Experiment

Integrated ELM and divertor power flux control using RMPs with low input torque in EAST in support of the ITER research plan

Development of robust indicators for the identification of electron temperature profile anomalies and application to JET

Systematic errors in tokamak magnetic equilibrium reconstruction: a study of EFIT++ at tokamak COMPASS

3D radiated power analysis of JET SPI discharges using the Emis3D forward modeling tool

1 Integrated Magnetic and Kinetic Control of Advanced Tokamak Scenarios Based on Data-Driven Models

A framework for the assessment and control of ITER main chamber heat loads

Validation of the ERO2.0 code using W7-X and JET experiments and predictions for ITER operation

First principles and integrated modelling achievements towards trustful fusion power predictions for JET and ITER

Tailoring tokamak error fields to control plasma instabilities and transport

New plasma regimes with small ELMs and high confinement at the Joint European Torus

Modelling of plasma facing component erosion, impurity migration, dust transport and melting processes at JET-ILW