Abstract:Metal 3D Printing (M3DP) has rapidly grown as a viable manufacturing method over recent years. These methods promise reducing the barrier to entry for prototyping and fabricating highly complex geometries that are almost impossible to create using traditional metal manufacturing processes, such as casting and machining. There are several M3DP methods that are widely accepted for prototyping applications, but almost no methods provide mass-scale and reliable fabrication of metal components for industrial use. One potential method which has shown a lot of promise over the past few years is binder jetting (BJet). Unlike most laser-based M3DP prototyping applications which generate parts on a point-by-point basis, BJet has the ability to fabricate parts on a layer-by-layer basis allowing for arrays of components to be generated simultaneously on one print bed while maintaining a similar resolution quality compared to laser-based processes. This process is predominantly available through original equipment manufacturers (OEM) as they require extensive pre-processing of a computer-aided design (CAD) before printing. This is due to the highly porous green parts which emerge from the printer before sintering. During sintering, one can observe extreme shrinkage and warping of geometries, which widely vary based on the geometric features. This study presents a computational framework to model the qualitative deformation of BJet green parts during sintering. We utilize a fully coupled thermo-mechanical model with space-varying mechanical and thermal properties to characterize the porous, viscous material during sintering. An Affine-particle-in-cell (APIC) material point method (MPM) is used to track large deformations in the component. A 2-dimensional numerical example is shown with qualitative comparison of BJet sintered components shown in literature. Ongoing work looks to integrate this physical model with a data-driven model to more efficiently predict the deformation of M3DP components during bulk sintering.

Mathematical Modeling of Extrusion Agglomeration

Improvement in an Analytical Approach for Modeling the Melting Process in Single-Screw Extruders

Modeling of Powder Bed Deformation in the Binder Jetting Technology

Mathematical modeling of the melt flow in the cone-ring channel of the extruder matrix

Modeling and simulation for varying die gap fluid extrusion

Simulation of Agglomerate Dispersion in Kneading Blocks

Agglomerate Size Evolution in Modular Twin‐screw Extruder: Modeling and Validation with CaCO3/LLDPE Compounding Experiments

Thermomechanical Modeling of Solidification Process of Squeeze Casting I. Mathematic Model and Solution Methodology

Predicting the Non-Linear Conveying Behavior in Single-Screw Extrusion: A Comparison of Various Data-Based Modeling Approaches used with CFD Simulations

A coupled thermo-mechanical material point model of binder jetted green part sintering

Modelling and simulation of hot direct extrusion process for optimal product characteristics: Single and multi-response optimization approach

Simultaneous Modeling of Powder Rigid Motion and Molten Pool Evolution for Powder-Based Additive Manufacturing

Development and evaluation of a mathematical model of dry granulation of molten blast-furnace slag

Modelling and simulation of metal additive manufacturing processes with particle methods: A review

A generalized method aiming at predicting the polymer melt flow field in the metering zone of large-scale single-screw extruders

Binder Jetting Additive Manufacturing of Ceramics: Analytical and Numerical Models for Powder Spreading Process

Numerical modeling of fill-level and residence time in starve-fed single-screw extrusion: a dimensionality reduction study from a 3D CFD model to a 2D convection-diffusion model

Three-dimensional Numerical Study of the Mixing Behaviour of Twin-screw Elements

Theoretical and Computational Analysis on the Melt Flow Behavior of Polylactic Acid in Material Extrusion Additive Manufacturing under Vibration Field

A discrete deformable element approach for the compaction of powder systems

A thermo-chemo-mechanical model for material extrusion of frontally polymerizing thermoset polymers