Abstract:The cross-slot stagnation point flow is one of the benchmark problems in non-Newtonian fluid mechanics as it allows large strains to develop and can therefore be used for extensional rheometry measurements or, once instability arises, as a mixing device. In such a flow, beyond a critical value for which the ratio of elastic force to viscous force is high enough, elasticity can break symmetry even in the absence of significant inertial forces (i.e. creeping flow), which is an unwanted phenomenon if the device is to be used as a rheometer but beneficial from a mixing perspective. In this work, a passive control mechanism is introduced to the cross-slot by adding a cylinder at the geometric centre to replace the ‘free’ stagnation point with ‘pinned’ stagnation points at the surface of the cylinder. In the current modified geometry, effects of the blockage ratio (the ratio of the diameter of the cylinder to the width of the channel), the Weissenberg number (the ratio of elastic forces to viscous forces) and extensibility parameters ( $\unicode[STIX]{x1D6FC}$ and $L^{2}$ ) are investigated in two-dimensional numerical simulations using both the simplified Phan-Thien and Tanner and finitely extensible nonlinear elastic models. It is shown that the blockage ratio for fixed solvent-to-total-viscosity ratio has a stabilizing effect on the associated symmetry-breaking instability. The resulting data show that the suggested modification, although significantly changing the flow distribution in the region near the stagnation point, does not change the nature of the symmetry-breaking instability or, for low blockage ratio, the critical condition for onset. Using both numerical and physical experiments coupled with a supporting theoretical analysis, we conclude that this instability cannot therefore be solely related to the extensional flow near the stagnation point but it is more likely related to streamline curvature and the high deformation rates towards the corners, i.e. a classic ‘curved streamlines’ purely elastic instability. Our work also suggests that the proposed geometric modification can be an effective approach for enabling higher flow rates to be achieved whilst retaining steady symmetric flow.

Passive Viscous Flow Selection via Fluid-Induced Buckling

Passive viscous flow selection via fluid-induced buckling

Enhanced Stability of Flows Through Contraction Channels: Combining Shape Optimization and Linear Stability Analysis

Simulations of Interaction Between Flow and a Thin Elastic Beam Using Cip-Based Model with Adaptive Mesh

A Cantilevered Extensible Beam in Axial Flow: Semigroup Well-posedness and Post-flutter Regimes

Lattice Boltzmann simulation of viscoelastic flow past a confined free rotating cylinder

Viscous flow past a collapsible channel as a model for self-excited oscillation of blood vessels.

Energetics of collapsible channel flow with a nonlinear fluid-beam model

Vibrations of Cylindrical Objects Obstructing a Poiseuille-type Flow

Multiple Steady and Oscillatory Solutions in a Collapsible Channel Flow

The nonlinear dynamics of a cantilever beam subject to axial flow in a tapered passage

Control of a purely elastic symmetry-breaking flow instability in cross-slot geometries

Non-Newtonian fluid–structure interactions: Static response of a microchannel due to internal flow of a power-law fluid

Deformation of an Elastic Beam due to Viscous Flow in an Embedded Parallel Channel Network

Preventing Buckling of Slender Cylindrical Structures by Internal Viscous Flows

Elastic instability in a family of rectilinear viscoelastic channel flows devoid of centerline symmetry

Non-Newtonian fluid-structure interaction: Flow of a viscoelastic Oldroyd-B fluid in a deformable channel

Buckling instability of a thin-layer rectilinear Couette flow

Feedback-Induced Flutter Instability of a Flexible Beam in Fluid Flow

Flow-Induced Deformation of a Flexible Thin Structure as Manifestation of Heat Transfer Enhancement

Numerical Simulations of the Flow of a Dense Suspension Exhibiting Yield-Stress and Shear-Thinning Effects